DanD Posted January 18, 2016 Report Share Posted January 18, 2016 The plan is to drive to the lake towing the trailer with the snowmobile on it. Get to the lake, unload the snowmobile and then hook the trailer/fish hut to the snowmobile. Been working on this for a while; bought the 1500lb cap. tilt trailer last year Put a 7'X10' deck on it, to haul the sled around. Made up a set of skies, out of a 16' extension ladder (love Kijiji for cheap stuff) that attach to the wheels of the trailer, with a ratchet straps. I was able to haul out all our gear and three guys; all on the trailer at once. It actually pulled so easy that I kept looking back; thinking the trailer came off the hitch. A friend had the tubing from one of those portable garages; that I thought would make a great frame for the enclosure of the trailer. After welding all the tubing togeather and some cross bracing, made from 1" X 1/8" flat stock; it really firmed up the tube frame. Also roughed in the window(s) and furnace frame. Yes a 25,000 BTU RV furnace. I fish a lot outside; but when I want to get warm, it has to happen fast. LOL I then started skinning the hut with 24 gage sheet metal. Overlapped the seams by 2" and pop riveted every 3". Shot a coat of primer on the inside and out and then painted it with Tremclad dark blue gloss. Installed the furnace. Pre-wired the hut for the furnace, lighting, power ports (Cig Lighters), circulating fan (PC cooling fans) and an on-board battery charger/maintainer. I also installed a circuit that I can flip a toggle switch and have all the exterior lights flash like a car's 4 way lights. Should make it easier for people, who are meeting me out on the ice to find me? Then it was insulation time, installing the ducting for the furnace and build the benches. That's it so far. I still need to install the propane regulator and line to the furnace. Make the hinged lids for the benches and OH yea cut the holes. LOL Here's what I'm hoping to do for the floor/hole plan. Probably never fish with 6 people in so I may not cut all of them in? Depending on how well this whole thing works out; I plan on changing the axle to a drop down and get the frame down on the ice. For now I'm going to try using those roll up kid's sleds (magic carpet?) that Crappy tire sells. There should be enough spring in the plastic; that when put through the hole rolled up from inside the hut, down to the ice; it should try and unroll and make a nice fit and stop the wind from blowing into the hut? I'm open for suggestions for things I may not of thought of? Dan. Link to comment Share on other sites More sharing options...
chris.brock Posted January 18, 2016 Report Share Posted January 18, 2016 Holy Christ! Nice work man! Link to comment Share on other sites More sharing options...
Terry Posted January 18, 2016 Report Share Posted January 18, 2016 very cool, dude Link to comment Share on other sites More sharing options...
Headhunter Posted January 18, 2016 Report Share Posted January 18, 2016 That looks sweet Dan! HH Link to comment Share on other sites More sharing options...
huzzsaba Posted January 18, 2016 Report Share Posted January 18, 2016 Nice Hut on Wheels! Wish there was frozen water close by and I would have been working on a similar project. Nice RX7 in the back! Link to comment Share on other sites More sharing options...
DanD Posted January 18, 2016 Author Report Share Posted January 18, 2016 Nice Hut on Wheels! Wish there was frozen water close by and I would have been working on a similar project. Nice RX7 in the back! Thanks. That's why there's wheels; may have to go looking for safe ice? That's my son's 1987 RX7; with a bit more power then originally supplied with from the factory. It now has a LS1 5.7Lt (Corvette/Camaro V8) that has had a lot of performance work done to it. Behind the motor, there's a 6 speed manual from a Corvette. The last we had the car on a dyno, it was pushing better then 450 Hp at the wheels. Scary but fun little car; at only 1800 Lbs. LOL Dan. Link to comment Share on other sites More sharing options...
Sinker Posted January 18, 2016 Report Share Posted January 18, 2016 That is sweet! A few buckets with the bottoms cut off would work good to stop the draft in the holes. How much do you figure the whole thing weighs? Slick unit, and well built! Good job! S. Link to comment Share on other sites More sharing options...
wormdunker Posted January 18, 2016 Report Share Posted January 18, 2016 Awesome job! I love looking at other people's projects. To stop the wind from coming up the fishing holes cut the bottom out of a 5 gallon pail. Insert the pail down your hole to the ice. Job done! Make sure you cut the holes in your hut floor to suit the diameter of the pail. Crazy carpet is good also. The bottomless pails are stackable for storage. Link to comment Share on other sites More sharing options...
misfish Posted January 18, 2016 Report Share Posted January 18, 2016 (edited) No areo? Front is flat. Think I said this before. LOL Ok I like 150% Edited January 18, 2016 by Brian B Link to comment Share on other sites More sharing options...
Fisherman Posted January 18, 2016 Report Share Posted January 18, 2016 So if the wife puts you in the doghouse, we know where you're going. Nice work! Link to comment Share on other sites More sharing options...
porkpie Posted January 18, 2016 Report Share Posted January 18, 2016 (edited) That's about the nicest fish hut I've ever seen! Edited January 19, 2016 by porkpie Link to comment Share on other sites More sharing options...
DanD Posted January 18, 2016 Author Report Share Posted January 18, 2016 (edited) How much do you figure the whole thing weighs? S. The trailer itself is 250 Lbs; I have tried my best to track the weight that I have added and i believe the total weight is approx 1000 -1100 Lbs Last year with the three guys on and our gear was Approx 800 Lbs plus the trailer weight and like I said I thought I lost the trailer, coming off the pavement onto the ice; it pulled so easy. Dan. Edited January 18, 2016 by DanD Link to comment Share on other sites More sharing options...
DanD Posted January 18, 2016 Author Report Share Posted January 18, 2016 So if the wife puts you in the doghouse, we know where you're going. Nice work! Man I'm almost there now; with the number of weekends working on it. Dan. Link to comment Share on other sites More sharing options...
mukluk Posted January 18, 2016 Report Share Posted January 18, 2016 Really nice job. I can see you have did your very best at keeping the weight factor to a minimum also. I had a smaller version and found the pails worked better than the magic carpet. They stayed in place better in windy days. I'm looking to make improvements and can't seem to find any. Let us know how everything goes once it"s put into operation. Link to comment Share on other sites More sharing options...
wormdunker Posted January 18, 2016 Report Share Posted January 18, 2016 I showed your hut to my wife. Even she's impressed. She really like the RV furnace! 1 question. Will it catch fish? Link to comment Share on other sites More sharing options...
NAW Posted January 18, 2016 Report Share Posted January 18, 2016 That's really good work man!! Great job! Link to comment Share on other sites More sharing options...
Fisherman Posted January 19, 2016 Report Share Posted January 19, 2016 There's only one thing missing...the brass pole. Link to comment Share on other sites More sharing options...
glen Posted January 19, 2016 Report Share Posted January 19, 2016 Cool. Very nice work. Thought about building one like that before. I like windows on all sides. 6-8 holes should be lots. Don't cut the four center ones. Then you can walk around and stretch. Build you seats like a comfy chair. Do you have a fridge and tv lol. Link to comment Share on other sites More sharing options...
can u fish Posted January 19, 2016 Report Share Posted January 19, 2016 That is going to be the sweetest ice hut on the lake when you get her done awesome job congrats. Link to comment Share on other sites More sharing options...
John Bacon Posted January 19, 2016 Report Share Posted January 19, 2016 Great idea. Much more practical than a Snowbear. Link to comment Share on other sites More sharing options...
leaf4 Posted January 19, 2016 Report Share Posted January 19, 2016 Awesome setup! Could use a sonotube for the holes, wax up the part that meets the ice and you should be ok I would think Link to comment Share on other sites More sharing options...
DanD Posted January 25, 2016 Author Report Share Posted January 25, 2016 (edited) Haven't quite finished yet; there's been no real rush, with the lack of what I consider safe ice; for this size of hut. It is coming though; got the benches finished and cut the holes in the floor. The four corners are all the same. The holes are not as round as I wanted; but that happens when you have had a couple of cocktails, while you're working on a project. I did go with the 12 holes; but the lids will have latches, so the holes not being used will not be an issue. I also cut the holes on a 45° angle, so that the lids will not fall through the opening and is strong enough to walk on. I've also added the (DOT) reflective tape and found/bought (Don't ask how much; I didn't and felt obliged to buy it, being special ordered) this flag to put on the door. If someone on a snowmobile can't see this at night; they'd have to be legally blind. LOL Dan Edited January 26, 2016 by DanD Link to comment Share on other sites More sharing options...
DanD Posted January 25, 2016 Author Report Share Posted January 25, 2016 My picture hosting site has gone down; will try and find out why? Sorry. Dan. Link to comment Share on other sites More sharing options...
Old Ironmaker Posted January 25, 2016 Report Share Posted January 25, 2016 Dan, unfortunately I can't see any of the pics. There is a square that says in bold black letters " IMAGE NOT AVAILABLE" with a X on a red octagon. Link to comment Share on other sites More sharing options...
DanD Posted January 25, 2016 Author Report Share Posted January 25, 2016 Yea I'll see if I can get this sorted; if not I'll re-post from another host? Dan. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now