Beavertail Posted October 4, 2014 Report Share Posted October 4, 2014 I was wondering if any members use them and what your thoughts are, pro's and con's. Any chance they could cause your lower end unit bolts to loosen off after trailering down the highway for a couple hours? Link to comment Share on other sites More sharing options...
BillM Posted October 4, 2014 Report Share Posted October 4, 2014 I always use one on our F115 main. As for the bolts? No need to worry about anything coming loose (I'm not to sure how/why this would happen anyhow) Link to comment Share on other sites More sharing options...
Rich Clemens Posted October 4, 2014 Report Share Posted October 4, 2014 I use one every time I trailer our boat. 90hp merc. We run 11-12 hours straight thru from PA to Nippising a couple times a year with no problems. Have been doing this for quite a few years. I would use one Link to comment Share on other sites More sharing options...
NANUK Posted October 4, 2014 Report Share Posted October 4, 2014 (edited) I use it all the time when trailering my boat, lots of miles on the road, no issues at all. I suggest the one with 4 little pinch pads on the heads, this design keeps the motor straight http://www.basspro.com/Swivl-EZE-Pro-Adjustable-Head-Transom-Saver/product/10205180/?cmCat=CROSSSELL_PRODUCT Initially I started with this type but it does not keep the motor straight and I think it could damage the paint when the motor flops over to the side http://www.basspro.com/Bass-Pro-Shops-Outboard-Boat-Motor-Support-Bracket/product/83274/?cmCat=CROSSSELL_PRODUCT Whatever style you decide to get, make sure it is compatable with your trailer, some are only designed to be attached to a roller at the back of trailer, you can also get one with the option of a little bracket you have to screw on the trailer Edited October 4, 2014 by stonefish Link to comment Share on other sites More sharing options...
Beavertail Posted October 4, 2014 Author Report Share Posted October 4, 2014 The reason I'm asking is because my bolts loosened off on my lower unit the other day while on the water. I've been using my boat all season with no issues (haven't touched the bolts). I'm just trying to figure out how this could happen. It ruined a weekend trip and nearly cost me losing the whole unit to the bottom of the lake. I use a transom saver and can't think of any other reason... Link to comment Share on other sites More sharing options...
spincast Posted October 4, 2014 Report Share Posted October 4, 2014 Use one all the time. Trailer the boats literally 1000's of k's per year (sometimes per trip). Never an issue. Did you by chance have the impeller replaced recently? Link to comment Share on other sites More sharing options...
Garnet Posted October 4, 2014 Report Share Posted October 4, 2014 I check/tighten my bolt every night when I fish Simcoe, Erie, Ont. and occasionally if I'm not on these waters. I no of 6-10 motors that have fallen off from guys not checking. Even Bob had 1 come off on Simcoe. You can buy spacer to go on your steering racket to stop motor from leaning to the side. The smaller motors have a screw that you can tighten to reduce this problem. Link to comment Share on other sites More sharing options...
Beavertail Posted October 4, 2014 Author Report Share Posted October 4, 2014 " Did you by chance have the impeller replaced recently? " I didn't replace the impeller this season, haven't even touched the bolts all season. Not really bolts I check for tightness on a regular basis either, something you just don't think about. I will now moving forward. Link to comment Share on other sites More sharing options...
Fish Farmer Posted October 4, 2014 Report Share Posted October 4, 2014 Was someone trying to steal it and you disturb them in the trying??? Link to comment Share on other sites More sharing options...
Beavertail Posted October 4, 2014 Author Report Share Posted October 4, 2014 Was someone trying to steal it and you disturb them in the trying??? The mechanic at the marina asked the same thing, but no. Store the boat in my garage 24/7 between trips. Link to comment Share on other sites More sharing options...
mistaredone Posted October 4, 2014 Report Share Posted October 4, 2014 (edited) I've been towing my 90ph around without a transom saver for 7 years with no problem but I always learn the hard way. I'm going to check my bolts before the next trip Edited October 4, 2014 by mistaredone Link to comment Share on other sites More sharing options...
mistaredone Posted October 4, 2014 Report Share Posted October 4, 2014 (edited) Edit Edited October 4, 2014 by mistaredone Link to comment Share on other sites More sharing options...
mike rousseau Posted October 4, 2014 Report Share Posted October 4, 2014 Nope I'm pretty sure the torque of your motor when you take off in your boat is far more then your motor bouncing on the road... They never made sense to me... Link to comment Share on other sites More sharing options...
Fisherman Posted October 4, 2014 Report Share Posted October 4, 2014 18 years so far on the same boat. Link to comment Share on other sites More sharing options...
Mister G Posted October 4, 2014 Report Share Posted October 4, 2014 I'm not saying a transom saver is a bad idea, just one I have never seen the need for and have never had a transom problem. Link to comment Share on other sites More sharing options...
spincast Posted October 4, 2014 Report Share Posted October 4, 2014 Just kinda makes sense to me that for 60 bucks I get this: "The triangle is the strongest, most stable geometric shape, and appears frequently in natural and man-made constructions and the main and supplementary support elements. A three-legged stool or table is the only kind that will not wobble, cheap mathematical support for my investment. But as with the rivet vs welded hulls, there are two sides to this debate Link to comment Share on other sites More sharing options...
BillM Posted October 4, 2014 Report Share Posted October 4, 2014 I'm not saying a transom saver is a bad idea, just one I have never seen the need for and have never had a transom problem. I think it really depends on the size of the motor you've got hanging off the back of your boat. I don't think I'd bother with a transom saver on say a 60hp or less. Link to comment Share on other sites More sharing options...
Fisherpete Posted October 5, 2014 Report Share Posted October 5, 2014 (edited) My 30hp Honda weighs 185lbs and I'm pretty sure it bouncing around without a transom saver on the back of my last 16' tinner contributed to that boat's demise... that hull was only 330lbs. The hull around the support braces from the transom to the rear floor had stress cracks all along it. I guess it really depends on the boat. Bigger, better built boats can probably handle it fine, but for what they cost, it's pretty cheap insurance. I have one on my 16' Legend now, no problems after lots of towing. Edited October 5, 2014 by Fisherpete Link to comment Share on other sites More sharing options...
OhioFisherman Posted October 5, 2014 Report Share Posted October 5, 2014 I used one on my boat with a 35 hp merc for 20+ years, no issues. Link to comment Share on other sites More sharing options...
fishindevil Posted October 5, 2014 Report Share Posted October 5, 2014 Been using one on almost all my boats for 20 yrs and never had a problem like that with any of them I have to one that has the rubber pinch pads on both sides and keeps the motor straight and everything's good the one I'm using now is from 2006 and probly 25,000km of towing on it and it's all good ...... Link to comment Share on other sites More sharing options...
Old Ironmaker Posted October 5, 2014 Report Share Posted October 5, 2014 (edited) Have always had one. Never thought about bolts loosening, why would they loosen? There is a great write up on Proctor Marine website about the advantages of using one by Larry Mellor. I have seen transoms flexing while driving down the highway behind a boat. I can't see why anyone with anything heavier then a 9.9 wouldn't use one. I also strap a rubber bungee around the bottom of the lower unit to the end of the transom saver. I don't want to drop a transom saver on the road after hitting an unseen pot hole. Overkill? I don't know but Larry does it and I bought his boat so that's what I do too. Edited October 5, 2014 by Old Ironmaker Link to comment Share on other sites More sharing options...
kickingfrog Posted October 5, 2014 Report Share Posted October 5, 2014 Cheap insurance. Link to comment Share on other sites More sharing options...
Mister G Posted October 5, 2014 Report Share Posted October 5, 2014 I think it really depends on the size of the motor you've got hanging off the back of your boat. I don't think I'd bother with a transom saver on say a 60hp or less. Hey, how did you know I have a 60hp motor..... I always make sure my motor is turn all the way to the right so the steering rod is inside the motor while towing. Don't know if that makes any difference or not but it's worked for me for many years. I suppose the roads you travel also play into this quite a bit. Link to comment Share on other sites More sharing options...
Shloim Posted October 5, 2014 Report Share Posted October 5, 2014 My boat came with one and it's a 1999, the transom is perfect. It's got its share of troubles but transom isn't one of them All the weight gets transferred to the trailer. Makes sense to me.... Link to comment Share on other sites More sharing options...
mattp33 Posted October 5, 2014 Report Share Posted October 5, 2014 I use 1 and have for a while. I dont even use the bungee cord anymore, haven't lost it yet. The other day I hit a huge bump and thought I lost it for sure but when I got to the lake it was still there. I was out with a guy the other day and he only uses the small bracket that takes pressure off the hydros and thats it. He said the transom saver can push the boat off the trailer and place a lot of strain the the straps. I use big boat straps so I guess i dont have that problem. He also said the torque of the big motor and the force of waves and rough water is far worse than the force on the transom when trailering. Anyone had 1 of these push a boat off a trailer Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now