mikemicropterus Posted December 17, 2009 Report Posted December 17, 2009 (edited) Hi guys I'd like to introduce myself as I am new to this board. Been reading posts for the past couple years and wanted to join so here I am I also have my own small engine repair business but will post that in the proper section. Been doing this for more than 25 years so if you have any questions I can probably help you out. I got lots of free advice. LOL Michael Edited December 17, 2009 by ML-S
bigfish1965 Posted December 17, 2009 Report Posted December 17, 2009 Welcome, Michael...hope you live close to me..lol...stupid lawnmower!
MCTFisher9120 Posted December 17, 2009 Report Posted December 17, 2009 (edited) Welcome to the family Exactly, you will enjoy OFC Michael(great name btw) Looking forward to your fishing reports next season Edited December 17, 2009 by Mike The Bass Fisher
I'mHooked Posted December 17, 2009 Report Posted December 17, 2009 Exactly, you will enjoy OFC Michael(great name btw) Looking forward to your fishing reports next season Next Season? You mean the one that starts when there's at least 4 inches of ice? Right?
ketchenany Posted December 17, 2009 Report Posted December 17, 2009 Welcome, Oh boy two small engine experts on board. Hope you're from the GTA, my snowblower likes cold fingers with no gloves.
Mike01 Posted December 17, 2009 Report Posted December 17, 2009 Welcome to the board...always good to have some more Mike's around!
Muskieman Posted December 17, 2009 Report Posted December 17, 2009 EH!!! WELCOME ABOARD THE BOARD!!! RFS
Leecher Posted December 17, 2009 Report Posted December 17, 2009 Welcome to OFC Michael Best site on the planet!!! Looking forward to reading your reports. Leechman
tjsa Posted December 17, 2009 Report Posted December 17, 2009 (edited) Welcome to the asylum, you can check out anytime, but you can never leave, lol Welcome, Michael...hope you live close to me..lol...stupid lawnmower! Hey Rick, shouldn't that be "stupid snowblower" never mind, just checked the satellite photos of your area, you're still looking brown. Edited December 17, 2009 by tjsa
Spiel Posted December 17, 2009 Report Posted December 17, 2009 Glad to have you on board. I'm sure your services and advice will be helpful to many.
Big Cliff Posted December 18, 2009 Report Posted December 18, 2009 Hey, wait a minute, first I was the only Cliff then some guy called ccmt comes along and I have to share that. Then I was the only really old fat guy and some guy named Beans had to out do me on both counts, at least I was the only "admitted" small engine mechanic, now I have to share that too? OK Welcome to the board! Where you located Mike?
bigredfisher Posted December 18, 2009 Report Posted December 18, 2009 welcome to OFC and tightlines to you, goodluck this season
mikemicropterus Posted December 18, 2009 Author Report Posted December 18, 2009 Thanks for the welcome. I am in the Smiths Falls/Carleton Place area specifically Franktown so if you know a courier Cliff hang on don't want to cause any friction between us so I'll let you retain the largess title I have some good tips to keep your motors running properly and save you money on unnecessary service. If your not going to use it for a couple,2, weeks, run fuel stabilizer, gas these days will go bad, loose octane, in a week, meaning if you use 87 regular fuel, in a week it can loose 2 points on it's octane rating, meaning you will be burning lower grade fuel than the motor requires. Winter fuel is not the same as summer fuel don't fill your tank in the fall before storage. I will post in the business section more about my business as it includes more than just small engine repair And Mike is a great name
Big Cliff Posted December 18, 2009 Report Posted December 18, 2009 Awh come on and you are an early bird too? Sounds like you have a good sense of humor and enjoy helping others you'll fit right in here! What product lines do you represent? The shop I work for sells Husqvarna, Echo, Poulan, to name a few. (but we work on just about anything) If you ever need IPLs or anything and I can help, just let me know.
ChrisK Posted December 18, 2009 Report Posted December 18, 2009 Welcome aboard Mike.....Nice to see you have finally come out of the closet I'm sure your skills will come in real handy around here... Cheers !!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now