fisher Posted June 9, 2014 Report Share Posted June 9, 2014 (edited) Just got a brand new boat and trailer couple months back and noticed that the trailer jerks when stopping and accelerating from the stop. Seems as though the weight shift forward on a stop and then shifts back on acceleration. Can't imagine this is good for the vehicle. Never happened before on my previous boat, but it was also much lighter. I checked the ball and coupler and they are both 2". Is this normal? Anyone else have same issue or suggestion. Edited June 9, 2014 by fisher Link to comment Share on other sites More sharing options...
HTHM Posted June 9, 2014 Report Share Posted June 9, 2014 Could be the holes in the receiver and insert are both worn. Link to comment Share on other sites More sharing options...
fisher Posted June 9, 2014 Author Report Share Posted June 9, 2014 Never thought of that. I'll have to check that out. Hopefully it's just the insert and not the actual hitch. Link to comment Share on other sites More sharing options...
bushart Posted June 9, 2014 Report Share Posted June 9, 2014 or maybe the hitch assembly is coming loose if bolted in thumps are never a good thing Link to comment Share on other sites More sharing options...
cheaptackle Posted June 9, 2014 Report Share Posted June 9, 2014 Loose clamp jaw on the trailer coupler? There should be a big lock nut on the bottom you can try tightening a little at a time for this. Other options all involve making sure all hardware is tight - winch & mast, nose roller etc, bunks even. Something has to be loose in order to move would be the way I'd approach it. Michael Link to comment Share on other sites More sharing options...
dracokaos Posted June 9, 2014 Report Share Posted June 9, 2014 does your trailer have brakes? Link to comment Share on other sites More sharing options...
Terry Posted June 9, 2014 Report Share Posted June 9, 2014 something worn out? 1 7/8 ball, 2" coupler? trailer brakes? Link to comment Share on other sites More sharing options...
glen Posted June 9, 2014 Report Share Posted June 9, 2014 What is your tongue weight? Link to comment Share on other sites More sharing options...
fishindevil Posted June 9, 2014 Report Share Posted June 9, 2014 It sure sounds like there's play in the coupler ?? Or receiver on the vehicle not a difficult fix is it's either or ?? Like poster above said check the big nut under the latch you lock your coupler to the ball you can tighten that and Gould stop it that's usually the culprit Link to comment Share on other sites More sharing options...
SuperDave Posted June 9, 2014 Report Share Posted June 9, 2014 A buddy of mine had the same problem. Is the pin too thin on your trailer hitch? if theres a small gap that will do it.Pretty sure that's all his problem was. Link to comment Share on other sites More sharing options...
Tybo Posted June 9, 2014 Report Share Posted June 9, 2014 Ball could be moving also.They do come loose over time. Link to comment Share on other sites More sharing options...
DanD Posted June 9, 2014 Report Share Posted June 9, 2014 (edited) Head out to a parking lot with a buddy; have them drive the tow vehicle, while you're in the boat watching for what/where the slop is? I've had to weld the pin hole on the receiver for a few customer; four or five tacks and then drill it out to the proper size. Takes longer to get the welder out then it is to do the job. If the draw bar hole is worn; they're not very expensive go get another one, along with a locking pin. Why I say a locking pin; we were rigging out of Sugarloaf for the day and it was dark when we go back in. Loaded up the boat and started heading home. Every time we started to go or slowed down CLUNK. Got out to check what was up and found that someone soled the pin; the safety chains were the only thing holding the draw bar from coming out. Dan. Edited June 9, 2014 by DanD Link to comment Share on other sites More sharing options...
grimsbylander Posted June 9, 2014 Report Share Posted June 9, 2014 If you have surge brakes on your trailer make sure the brake fluid is topped up. If there's air in the lines you'll get that clunking as the coupler retracts and extends. Link to comment Share on other sites More sharing options...
mattp33 Posted June 9, 2014 Report Share Posted June 9, 2014 If you have surge brakes on your trailer make sure the brake fluid is topped up. If there's air in the lines you'll get that clunking as the coupler retracts and extends. My brakes are fubar'ed onmy trailer and it clunks when stopping or starting, not looking forward to replacing almost everything to get rid of it. Been like it all last season since I bought the boat. I was just thinking about trying to tackle this problem yesterday but the beer won out! Link to comment Share on other sites More sharing options...
Old Ironmaker Posted June 10, 2014 Report Share Posted June 10, 2014 On a trip south we decided to tow with my cuz's Envoy rather than my Black Beater that had 600K on it. It banged stop and start all the way to the lake. I looked at it the next day and the drop wasn't right from the ball to the hitch. It wasn't out by much but made a heck of a noise. Put a few washers below the ball and voila noise gone. Link to comment Share on other sites More sharing options...
fisher Posted June 10, 2014 Author Report Share Posted June 10, 2014 Thanks for all the suggestions everyone. Will have to look at it closer when i get some time on the weekend. Btw, I don't have trailer brakes. Must be one or More of the things suggested. Drives me nuts and kind of glad that something is off and needs to be fixed. Link to comment Share on other sites More sharing options...
vance Posted June 10, 2014 Report Share Posted June 10, 2014 you never did say what you where towing with but I know that the factory hitch on my 2010 gmc has a LARGER inside diameter than any receivers that you can buy. Mine thumped around quite a bit until I shimmed it with some sheet metal and now all is good. vance Link to comment Share on other sites More sharing options...
fisher Posted June 10, 2014 Author Report Share Posted June 10, 2014 I am towing with an Acura MDX and the hitch was factory supplied and installed in 2009. I have used this same hitch and ball with my older boat and it had no problem at all. From everyone's comments, I now suspect the coupler on this new trailer may be the culprit as come to think of it on a few occassions I had a hard time getting the trailer to load onto the ball - having to get it just right/wiggle/jump on it,etc.... I have tried in the past to move the bolt up/down to adjust the ball opening, but could never seem to get it right. I have verified that both the coupler and ball are 2"...I am wondering if the coupler may be defective, mis-shaped or even mis-represented as a 2". I just picked up a new coupler at a place next to my work today and when I have time on the weekend will try to trouble shoot the problem, including replacing the coupler. Boat is stored elsewhere so have to wait to do this. Anyway, I'll keep everyone posted on the outcome. Link to comment Share on other sites More sharing options...
esoxansteel Posted June 10, 2014 Report Share Posted June 10, 2014 Likely where the pin goes into the receiver, i took a cheaper model back, and got a Reese, and it still does what you describe, bit of play between the pin and the hole Link to comment Share on other sites More sharing options...
Sinker Posted June 11, 2014 Report Share Posted June 11, 2014 Heavier boat, so the play in your reciever is showing. Its not going anywhere, just turn up the radio. S. Link to comment Share on other sites More sharing options...
Scott S Posted June 11, 2014 Report Share Posted June 11, 2014 Had the same issue. Went to a Van and Truck world and the guys told me that it's normal to have a little play with your pin. They said you don't want it snug or it will seize and makes it very difficult to get out. Scooter Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now