Jump to content

Recommended Posts

Posted

So I know I've posted a couple times on shimano's customer service, so sorry if this is getting redundant, but I thought I would share. So this summer I had a 7'11 crucial that's guide broke off, not too mention its three years old and takes quite a beating. Im sure I had a small knot in my braid and that's what caused the break. So obviously living in Peterborough makes it a little more convenient that I can just drive down and drop it off. So I drive down to the warehouse, tell the guy what happened, fills out some paperwork, and after shooting the breeze for 5 mins I was in and out in 10 mins. 9 days later tube arrives at my house (no charge), and I ask myself " did they just fix the guide, or send me a new one". Opened it up and sure enough brand new crucial tags and all. I have many shimano products, tons of rods and this is the 4th time I have had to send a 3 plus year old rod back, mainly cause im hard on them, but every time they have sent me a new rod back and in respectable timing, 9 days on this one ! So I am just so pleased with the service I have always received, that's why I buy shimano , and don't mind paying a couple hundred bucks for a rod or reel, cause they stand behind their product ! anyways just thought I would share, and give a big shout out to the guys in the repair centre !

Posted (edited)

I had similar service with St.Croix.. Busted Avid, returned (in 2 pieces, lol), got a new 1pc back in about 2 weeks no questions asked. This thread reminds me that I need to send in a few reels for Shimano for cleaning!

Edited by BillM
Posted

Same here on a St. Croix Premier...busted guide (my fault), whole new pole in replacement. Proof that you surely get what you pay for in the long run.

Posted

Most of my gear is Shimano and one of the main reasons is their customer service.

 

I've dealt with their Peterboro office a few times and it's always been good.

Posted (edited)

I've got a broken Stradic reel (my fault, abuse) I need fixed before spring, anybody have a tip on what I should do? what # to call?

 

good story Matty

Edited by chris.brock
Posted (edited)

I have had good success with fenwick, shimano and St. Croix. They are pretty much the only rods in my arsenal other than a couple of old loomis and a coupl of sage customs due to the fact that they have honoured their warranties in short order!

Edited by porkpie
Posted

Chris I would do 1 of two things. Mail it in to Peterborough and explain in a letter what the issue is. And they will fix it! you could mail it to me and I could go in for ya and see if they can fix it. Phone number is 705-745-3232.

Posted

I've got a broken Stradic reel (my fault, abuse) I need fixed before spring, anybody have a tip on what I should do? what # to call?

 

good story Matty

A co-worker just had a stradic fixed there. Had new gears, and handle installed, and a cleaning. Cost him $20.

 

S.

Posted

I am hoping my experience ends like yours. I have a reel seat on an old compre that keeps coming loose and it is sitting at the store I bought it from waiting for the rep to take a look at it. It has drove me nuts for the last year and I finally had enough!

Posted

Chris I would do 1 of two things. Mail it in to Peterborough and explain in a letter what the issue is. And they will fix it! you could mail it to me and I could go in for ya and see if they can fix it. Phone number is 705-745-3232.

thanks, I'll give them a call with the other #

generous offer too, I don't want to burden you, thanks though

Posted

I am hoping my experience ends like yours. I have a reel seat on an old compre that keeps coming loose and it is sitting at the store I bought it from waiting for the rep to take a look at it. It has drove me nuts for the last year and I finally had enough!

just ship it in and tell them what is wrong...the reps are busy and only visit the shops a few time a year.

Posted

My 400 Calcutta CT started acting up a few years back and when I'd turn the handle, the spool wouldn't work.

 

I took it over to the P'Boro office and he said to leave it with him and pick it up tomorrow. I came back the next day and he said he had to replace some part and while he had it apart he gave it a good cleaning too. I asked how much $$$$ and he said, "well it only took me 30 minutes to fix and clean and I have to charge you something, so gimme 5 bucks"

 

THAT'S customer service the Shimano way !!

Posted

Shimano is top notch.

 

I'm in the process of switching over all my gear.

 

You can't go wrong with the $20 reel service. They will replace anything that needs replacing and give the reel a good cleaning.

Posted (edited)

Does anyone know if they honor stuff without a sales receipt? I have a broken trolling rod that broke 6 inches from the tip for no apparent reason this past fall. The rod was in use for maybe 2-3 days of fishing. I have looked for the receipt and it is definitely long gone.

Edited by b_cdot
Posted

Does anyone know if they honor stuff without a sales receipt? I have a broken trolling rod that broke 6 inches from the tip for no apparent reason this past fall. The rod was in use for maybe 2-3 days of fishing. I have looked for the receipt and it is definitely long gone.

 

You don't need a receipt.

Posted

A co-worker just had a stradic fixed there. Had new gears, and handle installed, and a cleaning. Cost him $20.

 

S.

???? A cleaning costs more than that, let alone parts etc....must have been a problem on their end and he negotiated extra stuff for discounted rate

Posted

I own a stradic, how often do you send them in for a cleaning,what's the process to set it up, and whats the turn around time, and approximate cost? I have never owned a reel worth doing this. Thanks. MM

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Topics

    Popular Topics

    Upcoming Events

    No upcoming events found

×
×
  • Create New...