irishfield Posted October 16, 2010 Report Share Posted October 16, 2010 UUGGGHHHH !!! I don't mind doing this so much when it's a paying customer.... but this is my own machine! I'd much rather be fishing on a friday afternoon, that's for sure. They don't make fuel like they use to... exhaust valve guides shot after 215 hours. Clearance is like throwing a wiener down a hallway. Link to comment Share on other sites More sharing options...
vinnimon Posted October 16, 2010 Report Share Posted October 16, 2010 Dont feel bad Wayne! Im in the same boat! What im doing to prevent any stress is go fishing first, for relax time then go at her!Engine that is! Link to comment Share on other sites More sharing options...
Roy Posted October 16, 2010 Report Share Posted October 16, 2010 I know you love that kinda stuff, Wayne. It's all Greek to me though. Link to comment Share on other sites More sharing options...
HTHM Posted October 16, 2010 Report Share Posted October 16, 2010 You bragging or complaining? Link to comment Share on other sites More sharing options...
irishfield Posted October 16, 2010 Author Report Share Posted October 16, 2010 ..about my wiener? Link to comment Share on other sites More sharing options...
danc Posted October 16, 2010 Report Share Posted October 16, 2010 I don't know Wayne. They look fine to me. I think that perhaps you were just a little bored. Link to comment Share on other sites More sharing options...
spinnerbaitking Posted October 16, 2010 Report Share Posted October 16, 2010 Checking maps of Simcoe & packing for a Clubbie out of Barrie, hope we figure something out, but if we don't I have a great Boater & we'll have fun any way Richard Link to comment Share on other sites More sharing options...
Nipfisher Posted October 16, 2010 Report Share Posted October 16, 2010 like throwing a wiener down a hallway. I knew a girl like that. Link to comment Share on other sites More sharing options...
Raf Posted October 16, 2010 Report Share Posted October 16, 2010 have you tried buffing that out? Link to comment Share on other sites More sharing options...
irishfield Posted October 16, 2010 Author Report Share Posted October 16, 2010 That's about how it works Raf. New valve guides and we'll "buff" them to size! lol Tomorrow I'm gonna change the oils in the Verado and Kicker, winterize the plumbing and get the boat ready for Muskie hunting! Link to comment Share on other sites More sharing options...
Terry Posted October 16, 2010 Report Share Posted October 16, 2010 maybe you can just slap a VW motor on that thing LOL Link to comment Share on other sites More sharing options...
Tybo Posted October 16, 2010 Report Share Posted October 16, 2010 Thats it, a couple of bolts. Thats so easy peasy. Man did I ever get into the wrong trade. Link to comment Share on other sites More sharing options...
aplumma Posted October 16, 2010 Report Share Posted October 16, 2010 Did they start adding Ethanol to avgas??? or is it the lower sulfur?? that seems not near enough hours to burn exhaust guides. I have never seen/worked with aircraft motors but in diesel language it seems like a short time. I am sure you will get it straighted out and back together quick enough. Art Link to comment Share on other sites More sharing options...
irishfield Posted October 16, 2010 Author Report Share Posted October 16, 2010 Art, the old WWII technology is designed to run on 80/87.. which has about 5 times less lead in it than the 100LL that we can only get now. 100LL has about 15 times the lead in it that our LEADED regular car fuel use to have. It's the extra lead that causes valve sticking and erosion. The guides don't really get burnt, they just get worn away until they get so sloppy the valve stem can coc k and break. I hate the smell of car gas in an airplane, but I'm thinking I'm going to have to go that way and use premium and lead additive to create something similar to the 80/87. Just becomes a PITA constantly checking fuel sources for ethanol before filling the jugs/aircraft fuel tank. As ethanol is an absolute no no in an aircraft and it's sealed fuel tanks. Link to comment Share on other sites More sharing options...
OhioFisherman Posted October 16, 2010 Report Share Posted October 16, 2010 LOL are those jugheads? Link to comment Share on other sites More sharing options...
irishfield Posted October 29, 2010 Author Report Share Posted October 29, 2010 (edited) Well I made the right call pulling them all off and it's the best $1200 I ever spent. It was going to be a WHOLE LOT MORE expensive if I let it go for a few more hours... as it was going to be catastrophic! Now to put "humpty" back together again, now that the cylinders/valves are all redone. Edited October 29, 2010 by irishfield Link to comment Share on other sites More sharing options...
Gerritt Posted October 29, 2010 Report Share Posted October 29, 2010 I would say good call Wayne! Link to comment Share on other sites More sharing options...
bigbuck Posted October 29, 2010 Report Share Posted October 29, 2010 Cracked Valves!! Ouch, that will leave a mark!!! I'd hate to imagine what would happen if it broke during flight, you'd have a real nose heavy glider. Link to comment Share on other sites More sharing options...
Terry Posted October 29, 2010 Report Share Posted October 29, 2010 yeah real good call but you should be muskie fishing instead Link to comment Share on other sites More sharing options...
fishnsled Posted October 29, 2010 Report Share Posted October 29, 2010 yeah real good call but you should be muskie fishing instead Agreed. It looks like a great winter project. Since it's still fall...go Nice to know that you'll be around for a while and didn't leave this repair until it was too late. Link to comment Share on other sites More sharing options...
capt bruce Posted October 29, 2010 Report Share Posted October 29, 2010 "Clearance is like throwing a wiener down a hallway. " glad I read further thought this was a thread about my sex life .carry on Link to comment Share on other sites More sharing options...
Gerritt Posted October 29, 2010 Report Share Posted October 29, 2010 "Clearance is like throwing a wiener down a hallway. " glad I read further thought this was a thread about my sex life .carry on Well you are eventually bound to touch the sides... G Link to comment Share on other sites More sharing options...
Guest gbfisher Posted October 29, 2010 Report Share Posted October 29, 2010 The title should've been "What'd ya do friday morning until noon". and,,,,,,you won't wanna know... Link to comment Share on other sites More sharing options...
tb4me Posted October 29, 2010 Report Share Posted October 29, 2010 wow good call Wayne..that valve was seconds from becoming a grenade.. Link to comment Share on other sites More sharing options...
Whitespinnerbait Posted October 30, 2010 Report Share Posted October 30, 2010 UUGGGHHHH !!! They don't make fuel like they use to... exhaust valve guides shot after 215 hours. You should have been using fuel STABILZER Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now