tbayboy Posted July 28, 2013 Report Share Posted July 28, 2013 Hey everyone. I usually start out with flouro leaders on a lot of my setups but I've had problems with the connections breaking just enough to make me wonder if I'm doing something wrong. What ends up happening is that any sort of break - be it a snag or a large fish catching me with badly set drag - it breaks off at the braid to flouro knot. I've noticed it most on the lighter lines (say 10lb power pro to 8-12 lb flouro). I use that fishing rivers a lot, dragging tubes and craws along the rocky bottoms and jigging for 'eyes - both of those result in a decent amount of snags and it's really annoying to loose 2-3' of leader and have to do a new uni to uni on the spot. I generally just swear and then fish straight braid the rest of the day. So... what does every one else use? Any tips? Link to comment Share on other sites More sharing options...
Rich Posted July 28, 2013 Report Share Posted July 28, 2013 Barrel swivel. It's worth the time and money. Link to comment Share on other sites More sharing options...
Musky or Specks Posted July 28, 2013 Report Share Posted July 28, 2013 Barrel swivel. It's worth the time and money. Rich has got it right. I use the smallest barrel swivel you can buy. Link to comment Share on other sites More sharing options...
Fishnwire Posted July 28, 2013 Report Share Posted July 28, 2013 Barrel swivel. It's worth the time and money. I have to say I don't have a lot of problems with my set-up breaking at the uni-to-uni...but I do use barrels a fair amount of the time anyway. Especially if I'm using something that's going to cause a lot of twist. You'll have a hard time with a leader any longer than a couple of feet though because you'll be reeling the barrel into your eyes if it's too long and/or you're not paying attention., Link to comment Share on other sites More sharing options...
BillM Posted July 28, 2013 Report Share Posted July 28, 2013 I have to say I don't have a lot of problems with my set-up breaking at the uni-to-uni...but I do use barrels a fair amount of the time anyway. Especially if I'm using something that's going to cause a lot of twist. You'll have a hard time with a leader any longer than a couple of feet though because you'll be reeling the barrel into your eyes if it's too long and/or you're not paying attention., There's no need for a leader to be so long that you can't cast because you're reeling the swivel into your guides... 18-24 inches.. I haven't found a situation yet that I needed something longer, regardless of species. Link to comment Share on other sites More sharing options...
kickingfrog Posted July 28, 2013 Report Share Posted July 28, 2013 For me, I like to have my lure less than 12 inches from the tip of my rod when I'm casting but I like my leader to be at least 12 inches. So any time I do have a swivel tied on I don't feel as comfortable, confident or accurate in my casts. For those reasons I use a snap swivel instead with spoons and spinners. Link to comment Share on other sites More sharing options...
d_paluch Posted July 28, 2013 Report Share Posted July 28, 2013 (edited) I only just started using fluoro leaders (well..pline fluroclear...)and had my knot break on me yesterday at the fish-a-thon. I did a uni to uni but the next time I did extra wraps for the fluoro side. Didn't break on me the rest of the day even after getting into some legit snags. I am not so sure about the whole 'fish can see the line' thing. I just like tying knots and cutting mono/fluoro over braid. Unless my knife is super sharp, I end up fraying the crap out of braid and it just looks unappealing. **I also added a simple overhand knot to both the fluoro and braid side with the tag ends before snipping...not sure if it helped, but I am a believer in 'if you don't know knots, tie lots' Edited July 28, 2013 by d_paluch Link to comment Share on other sites More sharing options...
kickingfrog Posted July 28, 2013 Report Share Posted July 28, 2013 Some knots work better if the lines are close in diameter, some are better if there is a difference in diameter. Superglue is great insurance as well. I keep a couple of the instruction booklets from the spools of line because I can never remember which is which. A good pair of braided line cutters also are worth every penny. Link to comment Share on other sites More sharing options...
d_paluch Posted July 28, 2013 Report Share Posted July 28, 2013 Some knots work better if the lines are close in diameter, some are better if there is a difference in diameter. Superglue is great insurance as well. I keep a couple of the instruction booklets from the spools of line because I can never remember which is which. A good pair of braided line cutters also are worth every penny. Good call on the braided line cutter, next time I'm at Sail or BPS I'll snag one. Also thanks for the tip on superglue, that never even crossed my mind! Another tip with superglue, is it works WONDERS to close up cuts from line or hooks! Temporary of course but it works on the fly Link to comment Share on other sites More sharing options...
dylan21 Posted July 28, 2013 Report Share Posted July 28, 2013 I always use an albright knot to tie braid to fluoro. Best and easiest ti tie in my opinion. Link to comment Share on other sites More sharing options...
manitoubass2 Posted July 28, 2013 Report Share Posted July 28, 2013 I always use a pline barrel swivel when using a leader. No issues at all. One bonus is you never have to worry about the line diameter differences. I also pre tie my leaders before heading out so I have a bunch of extras ready to go Link to comment Share on other sites More sharing options...
Sinker Posted July 28, 2013 Report Share Posted July 28, 2013 I do an improved clinch-improved clinch and I've never had it fail. Maybe I'm just lucky, but it works great for me with any set up, or line diameter. S. Link to comment Share on other sites More sharing options...
FloatnFly Posted July 28, 2013 Report Share Posted July 28, 2013 i use a surgeons for all line to line connections, make sure to moisten the line really well and take your time cinching the knot so you don't heat the line which will cause weaknesses in fluoro and mono Link to comment Share on other sites More sharing options...
registerfly Posted July 28, 2013 Report Share Posted July 28, 2013 I always use an albright knot to tie braid to fluoro. Best and easiest ti tie in my opinion. I agree 100% best knot to use. If I'm lazy, dble surgeon works for me all the time as well. Link to comment Share on other sites More sharing options...
tbayboy Posted July 28, 2013 Author Report Share Posted July 28, 2013 Thanks for all the advice guys. For some reason I've never been a big swivel fan but I should give it a shot with a shorter leader. Also need to investigate some other knots - I do generally moisten them well but maybe superglue could be in order as well. Sean Link to comment Share on other sites More sharing options...
musky_hunter Posted July 29, 2013 Report Share Posted July 29, 2013 Albright with finger saver... Link to comment Share on other sites More sharing options...
wormdunker Posted July 29, 2013 Report Share Posted July 29, 2013 want to see an easy way to tie knots? Go to www.animatedknots.com Hope this helps! Link to comment Share on other sites More sharing options...
backbay Posted July 29, 2013 Report Share Posted July 29, 2013 I've had good luck with Albrights, simply re-tying occaisionally. Link to comment Share on other sites More sharing options...
SlowPoke Posted July 29, 2013 Report Share Posted July 29, 2013 Double nail knot will solve your problems... Mike P introduced me to the Tiefast tool a number of years ago and I use it for everything. Just did a demonstration knot for a friend using 30lb braid to 130lb Yozuri Fluoro... you'll slice through a glove before that knot will break. The only issue I've had with this knot is tying flea-flicker line to braid backing. The knot works but the flat profile of the FF doesn't look nice! Also perfect for snelling hooks! Link to comment Share on other sites More sharing options...
ecmilley Posted July 29, 2013 Report Share Posted July 29, 2013 been using a blood knot for all my braid to flouro connections for years zero break off at knot, usually power pro. or suffix performance braid in the 30-40 lb range and seagar leader material in the 8-12 lb range Link to comment Share on other sites More sharing options...
jedimaster Posted July 29, 2013 Report Share Posted July 29, 2013 I use a uni to uni knot and never have issues. I used to use an Albright and a surgeons but I found that when casting because the floro tag is pointed down it catches more than a uni to uni as the floro tag is pointed up. I also use a longer leader than 12 inches, usually at least two feet. I don't like using barrels as they will damage you guides if you happen to reel it in too far. http://seaguar.com/seaguar-community/knot-guide.htm Link to comment Share on other sites More sharing options...
JoshS Posted July 29, 2013 Report Share Posted July 29, 2013 Double uni-to-uni shouldn't break. Make sure to wet the knot before clinching. Blood knots an easy one to tie too but it slips when tying sometimes. Link to comment Share on other sites More sharing options...
mattp33 Posted July 29, 2013 Report Share Posted July 29, 2013 (edited) I use an Albright knot if my leader material is a larger diameter, if they are the same I use a blood knot. Albright is a very good knot Edited July 29, 2013 by mattp33 Link to comment Share on other sites More sharing options...
Steve Posted July 29, 2013 Report Share Posted July 29, 2013 nail knots and double nail knots are very strong... but for simple knot situations, for my every day use - salmon and bass - I use the surgeons knot. four wraps and I'm good to go. I'm just very careful when tightning the knot so it clinches properly. Link to comment Share on other sites More sharing options...
b_cdot Posted July 30, 2013 Report Share Posted July 30, 2013 albright knot, best knot, strongest knot learn it! But I suggest doing more like 16-20 wraps. It will still go through your guides fine when you really start tying them good, just not through micro guides Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now