solopaddler Posted October 2, 2010 Report Share Posted October 2, 2010 I contacted Spiel 2 weeks ago to build me a new float rod, this one a 15' 4-8lb CTS. Just picked it up this morning. The man does some pretty fine work and it's done fast. This one was a bit more involved as the cork handle is made with individual rings and hand turned. Great job Chris, THANK YOU! Hopefully I can de-virginize it tomorrow. Link to comment Share on other sites More sharing options...
Guest ThisPlaceSucks Posted October 2, 2010 Report Share Posted October 2, 2010 that's a gorgeous handle and seat. got any free time spiel? Link to comment Share on other sites More sharing options...
Joey Posted October 2, 2010 Report Share Posted October 2, 2010 Wow, that is gorgeous. Great work Chris Joey Link to comment Share on other sites More sharing options...
BillM Posted October 2, 2010 Report Share Posted October 2, 2010 I'm going to have to make a drift with that sucker tomorrow Link to comment Share on other sites More sharing options...
kickingfrog Posted October 2, 2010 Report Share Posted October 2, 2010 All these rod photos are making me envious. Nice work Spiel. Link to comment Share on other sites More sharing options...
Spiel Posted October 2, 2010 Report Share Posted October 2, 2010 Free time.....LOL I used to have free time until Solopaddler found out I built rods. Thanks for the compliments and I'm pleased that you're happy with the work Mike. You'll also be happy to know the bottom section off the 13' you dropped off yesterday for stripping and rewinding is already spinning with the finish on, you're gonna be ecstatic. Link to comment Share on other sites More sharing options...
OhioFisherman Posted October 2, 2010 Report Share Posted October 2, 2010 Nice looking stick, quality work and low key. Link to comment Share on other sites More sharing options...
solopaddler Posted October 2, 2010 Author Report Share Posted October 2, 2010 Free time.....LOL I used to have free time until Solopaddler found out I built rods. Thanks for the compliments and I'm pleased that you're happy with the work Mike. You'll also be happy to know the bottom section off the 13' you dropped off yesterday for stripping and rewinding is already spinning with the finish on, you're gonna be ecstatic. That's actually hilarious LOL! You're a great guy to work with my friend. Link to comment Share on other sites More sharing options...
RickOnt Posted October 2, 2010 Report Share Posted October 2, 2010 That Rod Should Catch Fish on Looks alone!!!! Spiel Do you make an Ice Rod??? Something in the 28"-32" range, Med/heavy. Rick Link to comment Share on other sites More sharing options...
Spiel Posted October 2, 2010 Report Share Posted October 2, 2010 That Rod Should Catch Fish on Looks alone!!!! Spiel Do you make an Ice Rod??? Something in the 28"-32" range, Med/heavy. Rick Certainly do Rick, I have a few tip sections laying around here that might fit the bill. What are you targeting? Link to comment Share on other sites More sharing options...
ChrisK Posted October 2, 2010 Report Share Posted October 2, 2010 Solopadler, That is one sweet float pole. Great workmanship from tip to butt from what I can see. You'll have to let us know how it measures up on the river. Spiels working on a fly rod for me as well. Hopefully he'll have some spare time(between your poles)to get her put together this fall so I can try it out on some Huron trib steel Link to comment Share on other sites More sharing options...
Leecher Posted October 2, 2010 Report Share Posted October 2, 2010 Excellent craftsmanship Chris Link to comment Share on other sites More sharing options...
Dusky Posted October 2, 2010 Report Share Posted October 2, 2010 Fine craftsmanship!!! Link to comment Share on other sites More sharing options...
vinnimon Posted October 2, 2010 Report Share Posted October 2, 2010 Excelent craftmanship you have there, Chris!Im still deciding on what rod I want! Decisions, decisions ! Link to comment Share on other sites More sharing options...
Gerritt Posted October 2, 2010 Report Share Posted October 2, 2010 Mike, I was going to brag to you I had that rod in my hand before you... but figured someone would chime in and say I had you're "rod" in my hand LOL! it is a sweet rod however.. Chris did an amazing job on it... I understand the cork was a real pain in the arse as the darker rings have rubber in them.. and do not sand evenly compared to the cork which equals alot of added man hours and patience. But the Burled maple seats, turned rings and the cork handles look awesome on that rod. Chris is working on my new pickeral rod... this will be my third from him. Quality rods from a quality guy, plain and simple. Sooo... when are we having beers at you're place? (from another thread.) G Link to comment Share on other sites More sharing options...
solopaddler Posted October 2, 2010 Author Report Share Posted October 2, 2010 Mike, I was going to brag to you I had that rod in my hand before you... but figured someone would chime in and say I had you're "rod" in my hand LOL! That's funny 'cause I had your rod in my hand when I was over there. it is a sweet rod however.. Chris did an amazing job on it... I understand the cork was a real pain in the arse as the darker rings have rubber in them.. and do not sand evenly compared to the cork which equals alot of added man hours and patience. But the Burled maple seats, turned rings and the cork handles look awesome on that rod. The cork was a huge pita for sure. Chris did a helluva job and I'm pretty picky about my float rods. Chris is working on my new pickeral rod... this will be my third from him. Quality rods from a quality guy, plain and simple. That's gonna be a sweet rod. Sooo... when are we having beers at you're place? (from another thread.) G As soon as possible. I was thinking next week but I may be headed to the camp for thanksgiving. I'll let you know bud. Link to comment Share on other sites More sharing options...
Loonietoon Posted October 2, 2010 Report Share Posted October 2, 2010 That's funny 'cause I had your rod in my hand when I was over there. Check out other thread that I started??? The cork was a huge pita for sure. Chris did a helluva job and I'm pretty picky about my float rods. That's gonna be a sweet rod. As soon as possible. I was thinking next week but I may be headed to the camp for thanksgiving. I'll let you know bud. Link to comment Share on other sites More sharing options...
John Posted October 3, 2010 Report Share Posted October 3, 2010 I had Mike's rod in my hand too! Great job Chris. I saw it as a work in progress and she sure is a thing of beauty finished. Link to comment Share on other sites More sharing options...
ctranter Posted October 3, 2010 Report Share Posted October 3, 2010 That rod should be rotating in a glass case at the corner of Yonge and Queen for Nuit Blanche because that is a work of art! very jealous Link to comment Share on other sites More sharing options...
WeedLine Posted October 3, 2010 Report Share Posted October 3, 2010 Beautiful pole. Great workmanship Speil. Solo, I'm sure you'll have lots of fun and trout with that work of art. Link to comment Share on other sites More sharing options...
brickNblock Posted October 3, 2010 Report Share Posted October 3, 2010 Yes-Sir, another fine Spiel special! There'll plenty of enjoyment outa that rod. I am hoping to have one in time for next years lunge opener.. Link to comment Share on other sites More sharing options...
fish_fishburn Posted October 3, 2010 Report Share Posted October 3, 2010 Nice work Speil, can you elaborate on the blank a little more? The burl seat is sweet. Link to comment Share on other sites More sharing options...
splashhopper Posted October 3, 2010 Report Share Posted October 3, 2010 I think I have rod envy Link to comment Share on other sites More sharing options...
perchslayer666 Posted October 4, 2010 Report Share Posted October 4, 2010 Very nice, how much? Link to comment Share on other sites More sharing options...
Spiel Posted October 4, 2010 Report Share Posted October 4, 2010 Thanks again everyone, most kind. Nice work Speil, can you elaborate on the blank a little more? The burl seat is sweet. I don't know much about the blank other than CTS' are available through John Collina at jccustomtackle.com in Caledonia. He designed the CTS line of Float Rod blanks for local steelheaders and they are getting great reviews from those using them. Very nice, how much? Well prices can vary depending on components used but would likely run about $700.00. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now