backbay Posted September 17, 2012 Report Share Posted September 17, 2012 I've had good luck with the Albright knot when tying braid to flouro..... Link to comment Share on other sites More sharing options...
dylan21 Posted September 17, 2012 Report Share Posted September 17, 2012 (edited) the best line to line knot is the ALBRIGHT. Very simple yet very effective, all you have to do it wet it then tighten. I use this all the time and never fails. http://videofishingknots.com/albright-knot.html hope this helps Edited September 17, 2012 by dylan21 Link to comment Share on other sites More sharing options...
singingdog Posted September 17, 2012 Report Share Posted September 17, 2012 I wonder why 10 lb flouro for a leader? It's stronger than your main line, but not strong enough to fend off toothy critters. If you believe that you need it for decreased visibility (don't get me started on flouro and invisibility), going with 10 lb over 6 or 8 lb seems to defeat that purpose, while making knot tying more difficult. I don't understand the angst over a uni-uni connection. It's easy to tie - it can be done in about a minute - and I have never broken off a well-tied uni-uni. Next best is a triple surgeons knot, which is even easier to tie, and just slightly less reliable. Lots of big, hard fighting fish have been landed on triple surgeon knots on fly gear. Link to comment Share on other sites More sharing options...
singingdog Posted September 17, 2012 Report Share Posted September 17, 2012 Singingdog, I will use fluorocarbon leaders heavier than main line when I fish jerk baits to reduce the chances of the bait over-running the line and getting fouled. Same thing for some topwater baits and a heavy mono leader. Thanks. I've never had that problem with jerkbaits, but have with WTD topwaters. I'll try it. Link to comment Share on other sites More sharing options...
Djeep Posted September 17, 2012 Report Share Posted September 17, 2012 one knot i havent seen mentioned that is very handy when tying different diameter lines is the slim beauty. its a salwater knot and I find it is not too hard to tie and works great for tying on heavy flouro leaders. give it a try, better than uni to uni imo. Link to comment Share on other sites More sharing options...
Harrison Posted September 17, 2012 Report Share Posted September 17, 2012 Palomar is all you need for everything. You can get fancy and use a trilene knot on a body bait if you are not using a snap. Triple surgeon here for braid to flouro. Never had an issue. Link to comment Share on other sites More sharing options...
EC1 Posted September 17, 2012 Report Share Posted September 17, 2012 Let me be the party pooper. I don't think your knot had any problem, you just skimped out the coin on FC line. I think Stren Fluorocast is TERRIBLE. I had 17# and it broke in all sorts of weird ways that I couldn't explain. You also can't go wrong with any of the knots that the others told you above. With FC, I find the ratio for money : performance is key. IMO, if you're not paying close to 20 bucks (or more) for a spool of FC, you won't get good quality. Maybe someone can prove me wrong, but I'll stick with what I have now and not complain about mysterious breaks. Link to comment Share on other sites More sharing options...
gordy28 Posted September 17, 2012 Report Share Posted September 17, 2012 I have success using the San Diego Jam knot to tie flouro directly to your bait (believe it was in an article by Aaron Martins) To connect braid to flouro I use the Seaguar knot - one lesson for me, know more than 3 twists of the loops of you connection knot is to big Gordy Link to comment Share on other sites More sharing options...
siwash Posted September 17, 2012 Report Share Posted September 17, 2012 (edited) uni to uni a real pain in the to tie It is a real hard knot.. stead hands and patience... hard to due if it's raw and bumpy while out on the water... Power Pro has it on there site... Edited September 17, 2012 by swordfish Link to comment Share on other sites More sharing options...
Steve Piggott Posted September 17, 2012 Report Share Posted September 17, 2012 Bob Foran Knot. this is new http://www.google.ca/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=3&cad=rja&ved=0CC0QtwIwAg&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3Dk3GUbY5CNs4&ei=lodXUJ_LM6ObyAHMr4GwCQ&usg=AFQjCNGt6h9trX2dauFeF3BaZvJGlWKn3g Link to comment Share on other sites More sharing options...
Fish Farmer Posted September 17, 2012 Report Share Posted September 17, 2012 If your main line is braid and your leader is flouro 15LB. or bigger, tie a UNI around the flouro with the braid then melt your flouro end with a match, it will make a ball on the end, then cinch your braid. Link to comment Share on other sites More sharing options...
Christopheraaron Posted September 17, 2012 Report Share Posted September 17, 2012 It is a real hard knot.. stead hands and patience... hard to due if it's raw and bumpy while out on the water... Power Pro has it on there site... Not sure what problem you guys have with it? I've found it quick and easy to tie, also a very, very strong knot. Link to comment Share on other sites More sharing options...
MCTFisher9120 Posted September 18, 2012 Report Share Posted September 18, 2012 uni to uni knot all the way. Link to comment Share on other sites More sharing options...
RickOnt Posted September 18, 2012 Report Share Posted September 18, 2012 "It all comes down to what you can tie confidently, repeatedly and reliably." Exactly!! Rick Link to comment Share on other sites More sharing options...
Bernie66 Posted September 18, 2012 Report Share Posted September 18, 2012 You should take a look at a video series online called "Knot War". It pegs knot against knot in terms of break strength in various situations from terminal tackle connection to joining braid to leader. In their comparison of the uni to uni against modified albright in 2010, the modified albright won by an amazing 2.5lbs in break strength on 15lbs fluoro. (the uni broke at 10.5lbs and the m-albright at 13lbs) They even have animations to teach you how to tie the knots. There is also a sebile knot out there that is suppose to have 100% breakstrength on leader to braid connection. Take a look and decide which knot is for you. Its a fine balance between what is easier to tie and the knot strength. I've been using the mod albright for the last few years(with a drop of superglue) and have not had a single knot failure even on fresh pier chinnies up to 30lbs but I am always looking for better knots. Link to comment Share on other sites More sharing options...
Joeytier Posted September 18, 2012 Report Share Posted September 18, 2012 To the OP, it may have something to do with the fact that Stren Fluorocast is TERRIBLE. I've never used such a brittle, terrible casting line in my life. Link to comment Share on other sites More sharing options...
jedimaster Posted September 18, 2012 Report Share Posted September 18, 2012 uni to uni to joining two lines together palamar for drop shot Improved clinch for everything else I can't even recall the last time I have had a line break from a fish on a knot. Link to comment Share on other sites More sharing options...
kickingfrog Posted September 18, 2012 Report Share Posted September 18, 2012 I was on one line's web site and it mentioned the importance of wetting the line before finishing knots (not new to most) but also mentioned using chapstik as an option. Personally I don't think I'm likely to do that on the water but I'll definitely do that the next time I'm pre-tying leaders at home. Link to comment Share on other sites More sharing options...
Cloudy15 Posted September 18, 2012 Author Report Share Posted September 18, 2012 To the OP, it may have something to do with the fact that Stren Fluorocast is TERRIBLE. I've never used such a brittle, terrible casting line in my life. Err havnt actually used that line yet, just grabbed it. Only planned on using it for leaders. Sounds like it was a poor choice. for the albirght does it matter if your collies are loose? in the demo's i saw they used rope and collied it very tight before cinching?? Link to comment Share on other sites More sharing options...
backbay Posted September 18, 2012 Report Share Posted September 18, 2012 Err havnt actually used that line yet, just grabbed it. Only planned on using it for leaders. Sounds like it was a poor choice. for the albirght does it matter if your collies are loose? in the demo's i saw they used rope and collied it very tight before cinching?? Best to keep it "tidy" and draw it closed slowly and uniformly as you tighten it. Funny, sometimes I used the improved with overlapping coils, but when I tie the regular Albright, I'm careful that they don't.... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now