irishfield Posted March 17, 2012 Report Posted March 17, 2012 I know it's hard to see in the photos but this is right on a bend in the hull so I don't think a rivet will work ..what I was getting at Grimace.. and Skinny.. you don't think wings are flat do you? A proper rivet will, or can be formed, to fit just about anywhere. If you were closer it would be fixed already.
Grimace Posted March 17, 2012 Report Posted March 17, 2012 I know Wayne, you laid the joke out there, I just thought I would finish it off. :-)
Sinker Posted March 17, 2012 Report Posted March 17, 2012 If its not leaking, just leave it alone. Why fix whats not broken? S.
i2cool2fool Posted March 17, 2012 Report Posted March 17, 2012 Some of the most venomous arguments on this planet have been over a good screw. :-) .....even bad ones, i imagine, if they exist. LOL
skinny Posted March 17, 2012 Author Report Posted March 17, 2012 If its not leaking, just leave it alone. Why fix whats not broken? S. now is the time as the floors are out and I can get to it I would hate to get the boat all back togethere then have a problem
jim Posted March 17, 2012 Report Posted March 17, 2012 Yous' guys are all rong. Duck tape on the outside and tuck tape on the inside [for added strength].
Muskieman Posted March 17, 2012 Report Posted March 17, 2012 Aluminum Button Head rivet or Stainless Button Head bolt with silicone and a Nylock nut ... Randy
i2cool2fool Posted March 17, 2012 Report Posted March 17, 2012 My old man taught me that a 9/16 wrench, hammer and duck tape should just about fix anything.
Tom McCutcheon Posted March 17, 2012 Report Posted March 17, 2012 Some of the most venomous arguments on this planet have been over a good screw. :-) Even a bad one too....
esoxansteel Posted March 17, 2012 Report Posted March 17, 2012 Your in deep now Tomfoolery, the mods are after you, with a fresh load of bananas
danc Posted March 17, 2012 Report Posted March 17, 2012 My old man taught me that a 9/16 wrench, hammer and duck tape should just about fix anything. He musta been a tin basher.
livinisfishin Posted March 17, 2012 Report Posted March 17, 2012 Cant wait until i rip out my floor in the next week or so...hope there isnt any surprises under there.
danbouck Posted March 18, 2012 Report Posted March 18, 2012 Some of the most venomous arguments on this planet have been over a good screw. :-) Tim, Listen to Irish
shane Posted March 18, 2012 Report Posted March 18, 2012 He musta been a tin basher. Tin Bashers? Those guys are always screwing things up.
HTHM Posted March 18, 2012 Report Posted March 18, 2012 Tin Bashers? Those guys are always screwing things up. Yea, but carpenters are nailing things down.....
i2cool2fool Posted March 18, 2012 Report Posted March 18, 2012 He musta been a tin basher. Nope. East coast trucker. Just a practical handy fella and had lots of phrases to share. Don't dare sharing some of them or I could be on the MOD q. LOL
danc Posted March 18, 2012 Report Posted March 18, 2012 Tin Bashers? Those guys are always screwing things up. Tell that to my pension plan managers.
vinnimon Posted March 18, 2012 Report Posted March 18, 2012 ..what I was getting at Grimace.. and Skinny.. you don't think wings are flat do you? A proper rivet will, or can be formed, to fit just about anywhere. If you were closer it would be fixed already. Tim , bring your boat up to the shop. Its a two minute fix with buck rivots. Water tight, will form to the hole and your good to go.
irishfield Posted March 18, 2012 Report Posted March 18, 2012 Let me know if he's doing that Vince.. as I'm mailing him rivets come Monday!
kickingfrog Posted March 18, 2012 Report Posted March 18, 2012 My old man taught me that a 9/16 wrench, hammer and duck tape should just about fix anything. And I can break anything with them.
Tybo Posted March 18, 2012 Report Posted March 18, 2012 when someone asks a question, no matter the subject, i would expect different people would have different solutions. If you be in the trades.A comment like this would get you fired in the tech trades. For there is only one solution.THE RIGHT ONE! If you only what to be a handy man do what ever. Safety depends on the right solution.
Recommended Posts