Hooked Posted November 9, 2011 Report Share Posted November 9, 2011 I have a space in my basement I am planning on building my own work bench. Looking for idea's from those that have done this with success. I also plan to utilize the wall above the table for storage.....so any shelving\storage innovations you have come up with would be great too. Thanks Link to comment Share on other sites More sharing options...
tb4me Posted November 9, 2011 Report Share Posted November 9, 2011 If you build one use 2x6 and build it well. Lots for lumber and lots of support. Id check out home depot cdn tire or Lowes for the workshop cabinets for the wall above the bench. I guess it all depends on what you want to do in the shop. If its light weight and just puttering around just go basic. If your doing heavy wood working or metal work you will want to go heavy duty.. Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted November 9, 2011 Report Share Posted November 9, 2011 (edited) When I built the workshop in our place back in Ontario I built my work benches with the front supports angling back toward the wall. Sort of in a triangular fashion if you know what I mean. This made it much easier for sweeping/cleanup and kept the front supports from getting in the way. The frame and supports were 2x4's and the top was 3/4" G1S plywood. This bench was 20' long and went along 2 walls wrapping around an outside corner. Here's a crude drawing to help visualize it. I also built a 6'X6' assembly table on wheels that I could roll around the shop as needed. The top was 1 1/4" Melamine coated MDF. A little overkill but it was free. Edited November 9, 2011 by DRIFTER_016 Link to comment Share on other sites More sharing options...
misfish Posted November 9, 2011 Report Share Posted November 9, 2011 The one I made in my old place,was made from 4x4,s.Lap jointed the whole thing,fastened with lag bolts.. You could put an engine on it. Im a go big, kinda guy. Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted November 9, 2011 Report Share Posted November 9, 2011 The one I made in my old place,was made from 4x4,s.Lap jointed the whole thing,fastened with lag bolts.. You could put an engine on it. Im a go big, kinda guy. My assembly bech was like that. Must have weighed 500#'s with the 6'X6'X1 1/4" MDF top and 4"X4" frame. Link to comment Share on other sites More sharing options...
Hooked Posted November 9, 2011 Author Report Share Posted November 9, 2011 Thanks for the info so far, if ya got pics would love to see them. I won't be working on anything heavy on the bench, pc stuff....some small wood work..... How high off the ground would you recommend the table be? I like that idea drifter, with the support being on an angle. Link to comment Share on other sites More sharing options...
NAW Posted November 9, 2011 Report Share Posted November 9, 2011 (edited) Ya.. What they said. Also think of these things: 1. You will want a good solid place to mount a vice. Make sure you consider this in your initial design. I used thru bolts with nut and washer to fasten my vice. Make sure you have the clearance to mount it correctly. 2. You may want to be able to fit a tool box underneath for storage. Make sure you consider the clearance for this in your design. 3. Make sure that you have adequate clearance in your shelves underneath to store your stuff. (eg, a drill in a hard plastic case). 4. Tie it into the wall, and floor, and make sure she's solid. 5. Before you start building, make sure you have a good spot for mounting a light above the bench that doesn't take up your work space. I re-wired my bench light to have it's own switch. 6. I have a drill press mounted on my bench, it was an afterthought, but luckily, it cleared my shelves above by under an inch. Another clearance thing to consider. 7. Pick a nice height for you to work at while standing, so you're not leaning over, or standing on your tippy toes. Just a few things to think about. Sketch out a few designs before you buy any material. Edited November 9, 2011 by N.A.W Link to comment Share on other sites More sharing options...
Nemo Posted November 9, 2011 Report Share Posted November 9, 2011 Check out Garage Journal. Some amazing stuff here. http://www.garagejournal.com/forum/showthread.php?t=103738&highlight=Workbench This thread should give you some inspiration. The Garage Gallery section is worth a look. Some incredible set ups in here. http://www.garagejournal.com/forum/forumdisplay.php?f=7 Nemo Link to comment Share on other sites More sharing options...
lew Posted November 9, 2011 Report Share Posted November 9, 2011 A peg board on the wall by the bench is always handy to hold the smaller tools you use on a regular basis, rather than digging thru the toolbox all the time. Link to comment Share on other sites More sharing options...
Hooked Posted November 9, 2011 Author Report Share Posted November 9, 2011 A peg board on the wall by the bench is always handy to hold the smaller tools you use on a regular basis, rather than digging thru the toolbox all the time. Haha, it's funny you mention that Lew, I was thinking of that seconds before I read your reply. It simply drives me crazy digging through for tools. Link to comment Share on other sites More sharing options...
Hooked Posted November 9, 2011 Author Report Share Posted November 9, 2011 Check out Garage Journal. Some amazing stuff here. http://www.garagejournal.com/forum/showthread.php?t=103738&highlight=Workbench This thread should give you some inspiration. The Garage Gallery section is worth a look. Some incredible set ups in here. http://www.garagejournal.com/forum/forumdisplay.php?f=7 Nemo Wow, some of those are freakin sweet! Thx for the links. Link to comment Share on other sites More sharing options...
Tybo Posted November 9, 2011 Report Share Posted November 9, 2011 You have to sit down and really think about how big. Too small,good for nothing. Too big,Then the bench call be in it's own way. It's always nice if it's moveable.If you build a floor model. Always over hang on the top facing you.This helps to keep spills from getting in the drawers and shelves. Link to comment Share on other sites More sharing options...
smally21 Posted November 9, 2011 Report Share Posted November 9, 2011 i put everything on wheels/casters. drag it out to the middle of the shop for assembly, large projects. sweep up under it, put it back. Link to comment Share on other sites More sharing options...
dave524 Posted November 9, 2011 Report Share Posted November 9, 2011 Years ago, when I was heavily into the shooting sports I built this reloading bench, as you an see by the detail shots the front lip is well braced for vise or other tool mounting. It is very solid and may be what you are looking for or give you some ideas on construction. http://accurateshooter.net/Blog/benchnrma.pdf Link to comment Share on other sites More sharing options...
misfish Posted November 9, 2011 Report Share Posted November 9, 2011 Years ago, when I was heavily into the shooting sports I built this reloading bench, as you an see by the detail shots the front lip is well braced for vise or other tool mounting. It is very solid and may be what you are looking for or give you some ideas on construction. http://accurateshooter.net/Blog/benchnrma.pdf Your link just made my pc go stupid. Link to comment Share on other sites More sharing options...
dave524 Posted November 9, 2011 Report Share Posted November 9, 2011 Your link just made my pc go stupid. its a pdf file you need adobe acrobat reader, thought most would have it installed. Link to comment Share on other sites More sharing options...
manitoubass2 Posted November 9, 2011 Report Share Posted November 9, 2011 A peg board on the wall by the bench is always handy to hold the smaller tools you use on a regular basis, rather than digging thru the toolbox all the time. Yeppers, and trace the tools where you want them to be if your especially picky. Also, keeps the wife or friends from grabbing a tool only to throw it on a shelf somewhere afterwards Link to comment Share on other sites More sharing options...
skinny Posted November 9, 2011 Report Share Posted November 9, 2011 a while back I built benches in my basement for my wife and I. Her's for scrapbooking mine for Rc car repair and what ever else. I built them for working when standing (now would like stools) I used 2x4 frame and plywood top then covered the plywood with masonite so I had a smooth surface that can be replaced. I wired plugs all around the front so cords hang down in front instead of laying all over the bench area. Link to comment Share on other sites More sharing options...
NAW Posted November 10, 2011 Report Share Posted November 10, 2011 Here's a few pics of mine. Lots of storage above. Lots of storage below. Motor mount on side for outboard motors. Peg board back. Fasteners shelves. 8' long, 28" deep and about 42" tall. I'm in the process of moving to a new house, to this bench is pretty much empty now. I'm glad you started this thread. One of the first things I'm going to do at the new house in put in a new work bench. Link to comment Share on other sites More sharing options...
misfish Posted November 10, 2011 Report Share Posted November 10, 2011 You failed to show me that,,,,,,,,, Link to comment Share on other sites More sharing options...
backbay Posted November 10, 2011 Report Share Posted November 10, 2011 ^^^^^ I have the same vice! I used a hardwood door I bought at Restore. The 30" depth was about right, and the length worked well. I suggest including a backsplash if you are doing work with small parts; it helps keep them on the bench. Link to comment Share on other sites More sharing options...
Fang Posted November 10, 2011 Report Share Posted November 10, 2011 (edited) Built these over a case of beer, a tub of 3" deck screws, a bottle of wood glue and my mitre saw. Probably cost me no more than $100 in 2x4's for both benches and one small sheet of plywood to cut the cross braces. These are heavy enough to take a big load, solid as a rock but if I ever move they'll be coming with me. This one has 2 2x electical plugs wired in front that go back and plug into wall outlets behind the bench Gotta have loads of storage underneath for all the toys Edited November 10, 2011 by Fang Link to comment Share on other sites More sharing options...
NAW Posted November 10, 2011 Report Share Posted November 10, 2011 You failed to show me that,,,,,,,,, Runs like a top. A loud top. Neptune 1.5hp. Link to comment Share on other sites More sharing options...
Ainsley Posted November 10, 2011 Report Share Posted November 10, 2011 Made this one a few months ago out of MDF, some construction lumber and a bit of hard maple. Link to comment Share on other sites More sharing options...
Skipper D Posted November 10, 2011 Report Share Posted November 10, 2011 I have'nt looked at all the posts on this , hope i am not repeating . Once we have our new shop up i plan to build ower new work benchs by useing 2"x2" square tubing light wall , framed and mig welded to the size i need , then painted red , with a 1/8 " one piece sheet metal formed top and polished aluminum checker plate for the shelving and doors . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now