Fisherman

Most batteries don't like being charged at more than C10, that being 10% of capacity. Therefore, as most portable packs are run from 7 Amp batteries. they shouldn't be charged at more than .7 Amps or 700mA. Get the right charger for the job.

Oh ya, that's a nice one, no feeling the wind with that on top of the noggin.

Every year the boys get a couple of pair of Bass Pro socks, the ones torture tested by TJ. You just can't seem to wear them out.

Going with a 4 stroke is pretty much a no brainer, as for Etec, you see any other modes of transportation sporting 2 jokes. Even a number of the modern snowmobiles are going that route.

Catching fishermen, I used to use a little clip on bell, first good hook set and it flipped off the rod, did a 2 and a half backflip and right down the hole.

That's just nasty and I would expect there will be some damage to the creek.

My rule is it's used to get you out of poop, not into it.

That's sad, should be in a museum for all to see or at least restored and not forgotten.

How come the steelheaders aren't giving support, or the bass anglers and carpers. Select few think some species are special, some people are too. If it's legal, quit bellyaching.

I'll have to ask next time I go to Sigrids in Barrie. They must have some down there in KW.

If I'm not mistaken those rubber bands won't come with an LT designation, they're not meant for load carrying capacity.

**

If they paid in cash, hope it wasn't with fake $50 greenbacks. Seems like there's quite a number of them floating around. Then CTV showed pictures of the "alledged" suspects, I won't say no more..

Drivin Home for Christmas -- Chris Rea.

Will run you about $30 in shipping and 2 weeks downtime. For your sake I hope so. Last time I sent an item back to them I got raped by their use of UPS, the fix and shipping cost more than the item. Their answer...Too Bad, so if Marcum was to fold up tomorrow I would be dancing a jig or two.

What Porkpie said.

I think it would be wise to ask TJ, run it by him and get his blessing so to speak.

Row...

Well karma might bite them in the lower unit. On a side note what caused the drive shaft to break? Or is the the prop shaft in the skeg?

Ya, that would work for me. There's probably someone on the board with an insight to sticker makers. I'd rather have the ones that can also be applied from the inside so the snow scraper doesn't peel them off.

Licence is federal, tax is provincial.

He's bored.

Well I tried every conceivable position, rattle, shook, caressed, fondled, nope, the spool doesn't go into free spool.

Sail has them.

Never tried holding it with spool towards the ground, I'll do a thorough check when I get home and report back.