aplumma

A Happy New Year to you and Goldie and the family. My trip up North last year was a pleasure and my next on this July will be spent at your fine place as well. Both the accommodations and the friendship you all shared made the 13 hours of travel one way worth it. Art and Joe

This is going to get locked if we continue attacking someone else opinion of a product. If you have a fact share it, if it is different than yours DONT attack it.please. Thanks Art

Chris it is a metal boat with jet drive. The course is set up with lots of turns and it is up too the navigator to steer the driver. When they did the onboard you will see his hand in front pointing the direction of the turns. They are 454 blown engines with burkley jetdrives and fins to steer. They are wicked fast and turn on a dime. It is called SPRINT boat racing and they are done in a field that they have dug out trenches and then filled with water. It is not main stream but very popular in Australia. Another fun race to see is unlimited outboard boat racing. We used to marshal the course on jetskies keeping the spectators from anchoring on the course as well as checking on the drivers if they blackout from the gees in the turn. Watch them on the straights they air it out and then slam it down and corner on a rail.

This is my favorite type of racing. Art

I checked with my Pops who is a wood worker and he recommended that you raise the temperature (5-10 degrees F) in the room to help flash off the oil as well as create a breeze in the room. Keep the door closed and open the window enough to get the fumes out for 8-10 hours if you can. The oil may make them cough or their throats feel slightly scratchy but it will not cause any real health issues. Art

A teacher told me many years ago "Knowledge is power" never a truer statement has been said. Good job on the repair. Art

Gas 2.45 a gallon and Diesel always 70-85 cents a gallon more. The split last year was only 40 cents. The funny thing is all of my oil stocks are showing a profit and dividends are averaging 3 to 4 % whoo hoooo. So if you use 10 thousand dollars of fuel and you own 40 thousand dollars of their stock you will be getting fuel at a discount of 16 percent. With the banks paying one fishing lure per 10 years guess which one is better. Disclaimer This is not advise on how to grow your future what worked for me might be bad for you. Art

I keep mine without any treatment so when I rub my eyes they don't burn. Art

I personally love the way my 1989 Ranger runs. I spent a lot of money restoring it because it has the hull design that I found both fast and stable. With the acquisition it might mean more R and D to bring more improvements to an already great product. Art

I thought the same thing Roy that is the wrong video star. Nice Video Simon thanks for taking the time to shoot your trip. We got lots of people just itching for thick ice. Art

Cold smoking is a process where you can infuse the smoke flavor without cooking the food. It is used heavily in the dairy and soft meats department. Most of the cold smoking is used in combination with a brine and spice soak to cure the meat. You can also cold smoke and then dry the meat into jerky with a dehydrator it is easier to keep the meat at the 140F in the dehydrator than it is in a smoker. Art

The issues facing storefronts is they need to have prime locations with display area where as the internet can rent a warehouse next to the railroad tracks. To often we as consumers will see the item in the store and get to evaluate it then go home and find it at a cheaper price on the net. The net is also getting in the game with CyberMonday as an attempt to pull in more businesses. The big overhead on net shopping is the cost of shipping since it is not a pallet load going to store X but rather many smaller shipments to various addresses. While many will give you "free shipping" at a cost break point it is just figured in to the cost of all of the items sold. Art

He also laughs hysterically when he run thru meadow grass. He says it tickles something or other. Art

I am waiting for the download so it will talk to the hds5 Gen2 unit before getting one. All of my research has come back as it being a little quieter and the anchor feature as being tighter than the minn kota. The minn kota has a better display on the hand fob as to what the motor is doing though. Art

Thank you for the well wishes we are blessed with 24 family and friends that will gather around the table this year. Art

Over weight on the tire if they are not under inflated. Notify the dealer in writing as well as photos till the issue is solved. Art

Mike I run a Ranger boat just to give you an idea of what works for me and why. I have the back and front deck done in carpet to make standing and kneeling easier. The center of the boat has vinyl with floor drains and screen to catch anything not liquid. They drain into the bilge area and then taken out with the bilge pump. The vinyl area gets hot in the sun and I spend very little barefoot time on it. The carpeted sections are used heavily since I fish barefoot or sandals most of the time. I usually place a wet towel on the vinyl floor and when a fish is landed it is on the vinyl with the towel on it. After a day of fishing the floor gets wiped down and the towel trolled for a little bit to clean it. I lay the carpet with a waterproof glue and skim it all over the wood where the carpet is. This seals the wood to some extent and as long as you dry the boat after your trips they will last for many many years. ( Mine is 28 years and doing fine). Art

Here is a site that makes pack rods they are well made and priced right. I have the 9ft med surf toro tamer and a diawa luna reel. It handles everything you will catch near shore. It fits in my suitcase and no worries about carrying it on or excess baggage. http://www.charkbait.com/cs/csrods-Travel-Rods.htm Art

The power vent series needs make up air for two conditions one is the combustion process which is not as large as the power vent that uses the air in the room to cool the combustion so it can be piped out in PVC/ ABS. If there is not sufficient air there is an issue of the flue pipe overheating. Art

Looks like a good time to put this one to bed. Thanks for the opinions but the personal attacks will get threads locked faster than anything else on this forum. Art

Sorry I can't give you any help being Canada has different codes than US. The issue you describe is that the make up air is not from an exterior source. The different between the furnace and the heater is the furnace will have 2 pipes on for combustion air the other is exhaust. The solution according to US codes is an exterior source of combustion air that is not drawing from X distance from windows doors in the house. Hope this helps. Art

first week in August is better for Joe and I. So for the first week in August we have Art and Joe, Roy and Jay, Joey, Allen and Paul, John and Barbara. . Any one Else for that dates? Rich and Patsy are a no. Art

Looks like Joe and I will be there the same week but I need to check a few things to make sure. Art

Consulting is the sale of information it is what they are selling. When you go in to their business you are using the product they offer. For the future if you call a lawyer and ask him a question he will track the time he is on the phone with you and send a note to billing to bill you for that time. If an intern brings him a piece of paper for him to read pertaining to your account he will also bill you for that time. A retainer is just an amount that you have on deposit for him to draw on in the process of doing the action you have asked him to do. It is no different than going to a restaurant and eating the bread and then saying the bread is free since I didn't order from the menu. They do this because people will by nature shop around and if they did not charge for window shoppers they would lose quite a bit of billable time. I am a plumber by profession and if I offered free house calls and free estimates I would not have much to show for a hard days work. Art

I beg to differ I have seen many people shoot vermin and just leave them lay. I personally do not hunt bears because I do not like the taste of meat eaters. If it is a management program that is needed to balance something that is out of whack then predator hunting is fine. It is the shoot and let it rot attitude is what I object too. Art