floater Posted May 6, 2021 Report Posted May 6, 2021 I just added a Yamaha 2.5 onto my 14 foot deep and wide. It is sitting next to the main that is a Yamaha 30 two stroke. Other than and EZ steer is there another way to join these two motors so I can steer with the mains tiller arm? The smaller kicker is far enough away I have to lean over to get to the handle. There is no mounting point on the front of the smaller motor for one of those Panther threaded rods.
Dara Posted May 6, 2021 Report Posted May 6, 2021 A long stick clip a stick on the the handle of the 2.5. A tiny bungee cord would work, gauge it with a couple holes to hook the bungee tight. Some polished diamond will would make a sweet looking handle
tomO Posted May 6, 2021 Report Posted May 6, 2021 I think if you lock the small motor to go strait ahead you can steer with the bigger one. 2
LeXXington Posted May 7, 2021 Report Posted May 7, 2021 The front handle on the 2.5 has (2) bolts I removed them, remove handle and put a bracket on it for eeze troll.
floater Posted May 7, 2021 Author Report Posted May 7, 2021 Great ideas. I will take another look at the motor. Thanks
dave524 Posted May 7, 2021 Report Posted May 7, 2021 23 hours ago, tomO said: I think if you lock the small motor to go strait ahead you can steer with the bigger one. Using the big one as a rudder is fine till the wind picks up then you are pretty much restricted to going downwind, so I bit the bullet and bought the EZ Steer, less stressful.
porkpie Posted May 8, 2021 Report Posted May 8, 2021 I bent a piece of aluminum and then drilled a couple of holes and ran the tiller arm bolts through it then mounted the Atwood version of ez steer. They are about $30 on amazon. Works great.
porkpie Posted May 9, 2021 Report Posted May 9, 2021 On 5/8/2021 at 12:16 PM, misfish said: You ^^^^^^^^^^^^^^^^^ So smart . My buddy Mcgyver’s idea on his boat, I just followed suit!
akaShag Posted May 12, 2021 Report Posted May 12, 2021 When I had a steering wheel, it was definitely time for the connecting brackets. But for a tiller boat, I used a tiller extension on the kicker when I ran it. Looks like this: https://www.gpbikes.com/ironwood-pacific-u-001-helmsmate-extension-handles?utm_source=google_shopping&gclid=CjwKCAjw-e2EBhAhEiwAJI5jg45GBH6YmNJolfZ6Xi8uSDDq4fRsQgAcpk5A46f_0kUoBFJLE_Cu2xoCOFEQAvD_BwE
floater Posted May 13, 2021 Author Report Posted May 13, 2021 That tiller extension looks good. I like the way you can swivel it towards you. I will try and find one of those if the stick doesn't work. Thanks
akaShag Posted May 13, 2021 Report Posted May 13, 2021 1 hour ago, floater said: That tiller extension looks good. I like the way you can swivel it towards you. I will try and find one of those if the stick doesn't work. Thanks There is a significant range of motion, and reach, and the throttle works well, as long as your throttle on the kicker is employed by twisting the tiller handle. In heavy waves it is a bit tricky, but boat handling in heavy waves is always a bit tricky. Doug
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now