lovetofish Posted January 4, 2021 Report Share Posted January 4, 2021 (edited) Saw this on another website, just wanted to share. Turns your big buddy heater into a stove for less then $4 Wooster Brush F0001 Acme Deluxe Five Gallon Grid https://www.amazon.ca/dp/B0019ESMLK/ref=cm_sw_r_cp_api_fabc_tg68FbK0WTJYS?_encoding=UTF8&psc=1 Edited January 4, 2021 by lovetofish 1 Link to comment Share on other sites More sharing options...
DanD Posted January 4, 2021 Report Share Posted January 4, 2021 (edited) Looks good! Great place to dry gloves or maybe burn them up? LOL The grill does look useful for warming things up. Just pulled my big buddy out of storage. When to test light and it wouldn't stay lit? The pilot flame was just a whisper of a flame and couldn't heat the thermal coupler to close the gas valve. Went on-line and found a simple fix for this. A Q tip swab with about half the cotton pulled off (to fit into the pilot nozzle) and some rubbing alcohol. Stick the wet swab down the nozzle (about an inch and a half) a few times and try lighting it. Worked great one turn of the igniter and a nice torch like blue flame. Dan. Edited January 4, 2021 by DanD Link to comment Share on other sites More sharing options...
misfish Posted January 4, 2021 Report Share Posted January 4, 2021 This is mine 4 Link to comment Share on other sites More sharing options...
misfish Posted January 4, 2021 Report Share Posted January 4, 2021 (edited) 15 minutes ago, DanD said: Looks good! Great place to dry gloves or maybe burn them up? LOL The grill does look useful for warming things up. Just pulled my big buddy out of storage. When to test light and it wouldn't stay lit? The pilot flame was just a whisper of a flame and couldn't heat the thermal coupler to close the gas valve. Went on-line and found a simple fix for this. A Q tip swab with about half the cotton pulled off (to fit into the pilot nozzle) and some rubbing alcohol. Stick the wet swab down the nozzle (about an inch and a half) a few times and try lighting it. Worked great one turn of the igniter and a nice torch like blue flame. Dan. Do that twice a season Dan . Just a bit of crumb or what ever,will hamper the pilot. Also, hold the button down and blow some air through it . Edited January 4, 2021 by misfish 1 Link to comment Share on other sites More sharing options...
lovetofish Posted January 5, 2021 Author Report Share Posted January 5, 2021 Thanks guys! I think I will do this to mine, just as maintenance. Tight lines Link to comment Share on other sites More sharing options...
bobowski Posted January 6, 2021 Report Share Posted January 6, 2021 You can also take off and flip the grate that is already on the buddy heater. 2 Link to comment Share on other sites More sharing options...
akaShag Posted January 6, 2021 Report Share Posted January 6, 2021 What will they think of NEXT!!!!😁 Link to comment Share on other sites More sharing options...
Dutch01 Posted January 7, 2021 Report Share Posted January 7, 2021 I would avoid at all costs. High heat on galvanized finish gives off toxic zinc fumes. Link to comment Share on other sites More sharing options...
akaShag Posted January 7, 2021 Report Share Posted January 7, 2021 14 minutes ago, Dutch01 said: I would avoid at all costs. High heat on galvanized finish gives off toxic zinc fumes. Hmmm. I see that the product's intended use is with painting............ Link to comment Share on other sites More sharing options...
Dutch01 Posted January 7, 2021 Report Share Posted January 7, 2021 On 1/4/2021 at 6:53 PM, misfish said: This is mine Buy it or make it? Link to comment Share on other sites More sharing options...
lovetofish Posted January 7, 2021 Author Report Share Posted January 7, 2021 Oh wow! Thanks for the heads up, looks like I will be building my own ;) Link to comment Share on other sites More sharing options...
misfish Posted January 7, 2021 Report Share Posted January 7, 2021 1 hour ago, Dutch01 said: Buy it or make it? Made. Link to comment Share on other sites More sharing options...
Dutch01 Posted January 7, 2021 Report Share Posted January 7, 2021 Just now, misfish said: Made. Nice! You should sell them (put me down for one) LOL Link to comment Share on other sites More sharing options...
Terry Posted January 7, 2021 Report Share Posted January 7, 2021 Damn, I hope he doesn’t charge me for the two he made me. Lol but I don’t think he would have much trouble selling a bunch of them 1 Link to comment Share on other sites More sharing options...
DanD Posted January 7, 2021 Report Share Posted January 7, 2021 I've got some 3/4 inch expanded metal that I'll try cutting out a grill like the store bought one? Weld a coupled hooks on the one end as to not to fall off and a couple of sections of angel iron to make the heating tray ridged. Thanks for showing me the idea guys. Have welder, can build! LOL Dan. Link to comment Share on other sites More sharing options...
Fisherman Posted January 8, 2021 Report Share Posted January 8, 2021 4 hours ago, misfish said: Made. Yup, have a Brian will make. Worked very well but unfortunately I cleaned out a bunch of my winter stuff, my cranky back seems to win every attempt I make at having fun. Link to comment Share on other sites More sharing options...
lovetofish Posted January 8, 2021 Author Report Share Posted January 8, 2021 I’ll just cut a grill to fit, heat it with a torch and bend it over as hooks Link to comment Share on other sites More sharing options...
Hack_Fisherman Posted January 8, 2021 Report Share Posted January 8, 2021 I don’t think there’s enough galv on that Exp metal to bother anyone. probably just as bad to use perf sheet that isn’t degreased 1st great idea, I hope to try this out this season Link to comment Share on other sites More sharing options...
lovetofish Posted January 8, 2021 Author Report Share Posted January 8, 2021 I wondered if I just heat the crap out of it, wouldn’t it eventually stop putting out poisons fumes? Link to comment Share on other sites More sharing options...
Hack_Fisherman Posted January 8, 2021 Report Share Posted January 8, 2021 17 hours ago, lovetofish said: I wondered if I just heat the crap out of it, wouldn’t it eventually stop putting out poisons fumes? You could simply burn it off with a propane torch in open air. Or simply do what bobowski did. (Use the black screen) Link to comment Share on other sites More sharing options...
SirCranksalot Posted January 10, 2021 Report Share Posted January 10, 2021 On 1/7/2021 at 12:07 PM, Dutch01 said: High heat on galvanized finish gives off toxic zinc fumes. True, but it can be burnt off quite easily---stand well back. I made a wood burning camp stove out of galvanized metal but gave it a good burn before using. I could see the yellow smoke rise. I let it burn well after the fumes stopped. Yeah I know--I dumped a few toxic fumes into the atmosphere. Link to comment Share on other sites More sharing options...
porkpie Posted January 10, 2021 Report Share Posted January 10, 2021 On 1/7/2021 at 11:30 PM, lovetofish said: I wondered if I just heat the crap out of it, wouldn’t it eventually stop putting out poisons fumes? They work fine. I have used one for 3 seasons. I did make one out of a wire grate midway through last winter that is a lot sturdier and moved on to that, but the roller grill works fine, you won’t see any fumes off of it. I did leave in on the heater for 45 minutes or so in the driveway when I first made it, but I didn’t stick around to watch for off-gassing. No issues ever since. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now