irishfield Posted August 16, 2020 Report Posted August 16, 2020 (edited) Why I told Glen to bring it to me... as I have a few rivets. Although returning things to where they once were, before the Daughter's wedding in the hangar last Fall, didn't go quite as smooth as I'd hoped... but I have the right stuff somewhere.. LOL Edited August 16, 2020 by irishfield 2 2
John Posted August 16, 2020 Report Posted August 16, 2020 5 hours ago, irishfield said: Fish out the season Glen, then rip the floor out and bring it up to me.... This is the way to go Glen.... 1
wkrp Posted August 16, 2020 Report Posted August 16, 2020 48 minutes ago, irishfield said: Why I told Glen to bring it to me... as I have a few rivets. Although returning things to where they once were, before the Daughter's wedding in the hangar last Fall, didn't go quite as smooth as I'd hoped... but I have the right stuff somewhere.. LOL I hope Transport Canada doesn't see that
irishfield Posted August 16, 2020 Report Posted August 16, 2020 (edited) How do you know at least 2 TC inspectors haven't already??.. and they had a damn good laugh like everyone else that's seen the "pick up". They don't care as to what I assemble/repair their amateur builts with! I don't work on certified airplanes and this isn't the only stock of rivets I have, just the stuff that had the marine heads in it.... somewhere under there. I tipped the shelves, did some swearing and walked away 2 months ago! Edited August 16, 2020 by irishfield
porkpie Posted August 17, 2020 Report Posted August 17, 2020 8 hours ago, Cast-Away said: My rebuild was $4,800 Glen on a 19 year old boat. Cost of boats today, this is inexpensive and worthwhile if someone is satisfied with their rig!
Hack_Fisherman Posted August 17, 2020 Report Posted August 17, 2020 16 hours ago, irishfield said: Why I told Glen to bring it to me... as I have a few rivets. Although returning things to where they once were, before the Daughter's wedding in the hangar last Fall, didn't go quite as smooth as I'd hoped... but I have the right stuff somewhere.. LOL Oh that is downright painful.... 1
DRIFTER_016 Posted August 17, 2020 Report Posted August 17, 2020 1 hour ago, Hack_Fisherman said: Oh that is downright painful.... Could be worse. Could be boxes of glitter!!!! 🤣 4
smitty55 Posted August 17, 2020 Report Posted August 17, 2020 19 hours ago, irishfield said: Why I told Glen to bring it to me... as I have a few rivets. Although returning things to where they once were, before the Daughter's wedding in the hangar last Fall, didn't go quite as smooth as I'd hoped... but I have the right stuff somewhere.. LOL Wow, you're better stocked than both main stores and the structures shop at First Air when I worked there. For a while I had those AN part numbers pretty well figured out. 1
cisco Posted August 17, 2020 Report Posted August 17, 2020 Wayne you're a good man to offer up the help. With summer student work available I suggest hiring a youngster to well.... "See that bunch of stuff that fell off the shelf and got kinda mixed up? Put it all back on the shelf sorted proper." For you a tax write off/business expense. For a kid some needed dough. AND you can turn your back on it like it never happened rather than cussing each time you think of it or walk past. What I'd do anyways. 1
irishfield Posted August 17, 2020 Report Posted August 17, 2020 (edited) I had a single employee in the "skunk works" years ago and quickly remembered why I walked out of our 100+ employee plastics plant. I'm done.. not going back in time. I have no income, nothing to write off against and enough "losses for future years" available on both businesses that I'll never see them used in my life time even if I suddenly got a contract from JT! . I have two airplanes left to refurbish, then sell and then it's auction time here. I've said it for years and need to take my own advise, life's too damn short! Especially considering Jennifer has now been gone for 5 years. Glen and I have spent a lot of time on the water together, his best claim to fame is a 14'r with Terry as a witness, then a snagged fishing rod and yes there was a Muskie in the mix. He knows fully that it is an open offer and there was no $ figure stated as it wasn't going to cost him anything. Edited August 17, 2020 by irishfield
Hack_Fisherman Posted August 17, 2020 Report Posted August 17, 2020 6 hours ago, DRIFTER_016 said: Could be worse. Could be boxes of glitter!!!! 🤣 I see these tiny rivets as a trades equivalent but well played! could be worse I suppose. Like iPhone screws
irishfield Posted August 17, 2020 Report Posted August 17, 2020 There's a box or two of AN470-AD1-4's or 5's in there... they'll get vacuumed up! LOL
misfish Posted August 17, 2020 Report Posted August 17, 2020 (edited) Hey Glen When yer ready to rip and throw,I have a great sawzal. If it breaks through the haul, not to worry. Wayne can fix that too. Edited August 17, 2020 by misfish 1
wkrp Posted August 17, 2020 Report Posted August 17, 2020 Ok guys I have to chime in but I think that Flex Seal might be the solution. I can bring the screen door. Lol 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now