mattybculp Posted April 30, 2015 Report Posted April 30, 2015 I was just going through some of my tackle and I've come across a box loaded with high end hooks and terminal tackle that have rust on them. There not coated in rust just spots here and there. My primary concern are the hooks, I some how dropped the ball and didn't recognize that there must have been some moisture/ water left in the Plano tray. It was a wet fall fishing period for me. I did some looking around some say coke, others say vinegar,CLR,stain remover,paint thinner. Has anyone had the same problem and did you find a particular method better than others. Thanks for the help.
aplumma Posted April 30, 2015 Report Posted April 30, 2015 You can wipe them down with wd40 it will get rid of surface rust. If they are corroded past that point unless the hooks and such have value VS time you will be mechanically cleaning and resharpening them. Art
Fisherpete Posted April 30, 2015 Report Posted April 30, 2015 I have also heard to put the hooks in coca cola for an hour - haven't tried it myself though. I would be hesitant to put chemicals like wd-40 on my hooks for the scent factor...
cram Posted April 30, 2015 Report Posted April 30, 2015 I have also heard to put the hooks in coca cola for an hour - haven't tried it myself though. I would be hesitant to put chemicals like wd-40 on my hooks for the scent factor... The oil would likely help, not hinder. And i'm not kidding.
lew Posted April 30, 2015 Report Posted April 30, 2015 The oil would likely help, not hinder. And i'm not kidding. I've heard the same thing, infact I heard WD40 actually contained some type of fish oil.
AKRISONER Posted April 30, 2015 Report Posted April 30, 2015 ive actually heard of people spraying wd40 on lures as an attractant. Not kidding.
BillM Posted April 30, 2015 Report Posted April 30, 2015 Old boys have been using WD-40 on worms for walleye for years, lol.
Smokercrafty Posted April 30, 2015 Report Posted April 30, 2015 Not to steer from the original post, but I watched a show that totally threw that WD40 myth right in the garbage. People have contacted the company and asked of its properties and if in fact it really did have fish oils in it..... Only to be told a definite NO!
Lunkerhunter Posted April 30, 2015 Report Posted April 30, 2015 I have tried the coca cola trick and have to say I was very impressed. shiny and brand new looking after the coke treatment. haha
lew Posted April 30, 2015 Report Posted April 30, 2015 ... Only to be told a definite NO! But it MUST be true, I read it on the internet
cram Posted April 30, 2015 Report Posted April 30, 2015 Some lobster fishermen use diesel soaked rags in their traps. A lobster is not a walleye or trout, but assume the concept is similar.
mattybculp Posted April 30, 2015 Author Report Posted April 30, 2015 I have 3 or 4 hooks soaking in some coca cola right now I will post my results.
Acountdeleted Posted April 30, 2015 Report Posted April 30, 2015 A few years ago I had some ice fishing gear that had rusted. 12 hours in CLR and they looked good as new. I'm told they will never be as sharp but that is just good hookset practice.
bare foot wader Posted April 30, 2015 Report Posted April 30, 2015 I went through the same thing, be careful if they are overly rusted....clr cleaned them up great, quick touch up with my hook sharpener, go fishing and the hooks were breaking, points breaking off and lots of missed fish...or hooks breaking during the fight
DanD Posted April 30, 2015 Report Posted April 30, 2015 Apple vinegar cider. Put the hooks in a jag that has a lid; fill jar with the vinegar and let sit overnight; you could give the jar a shake every once in awhile. Drain out the vinegar and rinse with clean water. Add a couple tablespoons of baking soda and fill the jar with water and let sit for a couple of hours. The baking soda is to neutralize the acids form the vinegar. Rinse again and dry them the best you can; I used a heat gun but a blow/hair dryer will work. After that spray them with some WD. A lot of the interior trim screws on my 50 Chevy had some surface rust in them. Did the cider vinegar thing and they came out almost a good as new. Dan.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now