northernpike56 Posted March 2, 2015 Report Posted March 2, 2015 (edited) Hi guys, I bought a Mariner 2 hp 2 stroke outboard for my aluminum sportspal canoe off kijiji this weekend, it looks like it's in mint condition. I was shown how to start it up, and what fuel mixture I should be using (50:1), but other than that, I know absolutely nothing about the motor. If/when in the future I need to buy parts to replace on it, or even just a new spark plug every so often, how would I go about determining what to buy, and who to buy it from online? I know these motors are fairly common, so there must be an abundance of guys working on them and used parts of sale. If anybody has any insight on what this motor actually is (model), I'd love to get any advice from you guys! Thanks, Matt Picture of my new motor! Edited April 7, 2015 by northernpike5391
DRIFTER_016 Posted March 2, 2015 Report Posted March 2, 2015 (edited) You can pick up plugs at Canadian Tire. FYI you will need the serial # of the motor in order to get parts for it. You should still be able to get some parts at your local Mercury Marine parts counter. Here are a few links for getting other parts: http://www.marineparts.com/PARTSPAGES/mercurymariner.htm http://www.usboatsupply.com/outboard-parts.php http://www.maxrules.com/fixmercindex.html Edited March 2, 2015 by DRIFTER_016
northernpike56 Posted March 2, 2015 Author Report Posted March 2, 2015 Cool Thanks!!, next time I'm out in the garage I'll pull off the cowling and write down what the serial number for the model is. Can't seem to find it on the surface of the motor
skeeter99 Posted March 2, 2015 Report Posted March 2, 2015 Cool Thanks!!, next time I'm out in the garage I'll pull off the cowling and write down what the serial number for the model is. Can't seem to find it on the surface of the motor All the info you need is in your first pic on the serial number plate, you aint gonna find anything taking the cowling off look to where tiller handle meets the cowling and look down to the black and silver plate in you pic that is the serial # plate and info for parts
chris.brock Posted March 2, 2015 Report Posted March 2, 2015 (edited) Great score! Never sell that thing (except to me ), keep it in the family. Does it have neutral? Neutral is a huge plus. edit- see if it's made in Japan, Yamaha made some small outboards for Merc and Mariner and they were solid Edited March 2, 2015 by chris.brock
John Bacon Posted March 2, 2015 Report Posted March 2, 2015 I think it may be a Tohatsu. It looks very similar to my 2.5 hp Nissan. Tohatsu makes motors for Nissan, Mercury, and Evinrude.
Sinker Posted March 3, 2015 Report Posted March 3, 2015 Id say thats a yamaha built mariner myself. If the plate says made in japan, its usually a yamaha. Your parts will be yamaha parts. That is a great little engine. Like Chris said, dont ever part with it. Any idea what year it is? The serial and model number on the plate will tell you everything. Good score! S.
Joeytier Posted March 3, 2015 Report Posted March 3, 2015 Cool little motor!! Does it have a built in fuel tank? I've thought about seeing how fast I could get my sportspal movin' with my 5hp merc!
chris.brock Posted March 4, 2015 Report Posted March 4, 2015 (edited) It would be built in fuel tank. We put a 9.9 on a 10' sportspal with a tiller extension handle thing so you could sit in the middle, and slowly took it up to WOT. It went like a dart, but revved out. A bigger pitch prop would have been interesting. Edited March 4, 2015 by chris.brock
northernpike56 Posted March 4, 2015 Author Report Posted March 4, 2015 (edited) To rub it in even more, I got it for 250 bucks! My sportspal canoe I got for 500 bucks and it is in mint condition. Kijiji is amazing, you just gotta keep your eyes peeled for the real deal. I looked at the motor more closely, and the model is a Mariner 2M 6A1. Seems to be a fairly common little motor as a google search yielded a ton of results Edited March 4, 2015 by northernpike5391
northernpike56 Posted March 4, 2015 Author Report Posted March 4, 2015 Mariner 2M 6A1 039007, says made in Japan. I found a pdf document online, and it says that the motor should either be a 1982 or 1983 Japanese sourced!
Sinker Posted March 4, 2015 Report Posted March 4, 2015 Mariner 2M 6A1 039007, says made in Japan. I found a pdf document online, and it says that the motor should either be a 1982 or 1983 Japanese sourced! Yep, as suspected, its a yamaha. Great engine. S.
mepps Posted March 4, 2015 Report Posted March 4, 2015 Looks like a great little motor. I've been using an old 1978 Johnson for a few years. My friend and I took it apart and rebuilt most of it - I was surprised how easy it was. Getting parts for my older unit was somewhat difficult, but I'm sure yours should be pretty easy.
livinisfishin Posted March 5, 2015 Report Posted March 5, 2015 A couple years back i traded an xbox for a 3.5 hp merc 1983 built in tank. Its been a pretty good engine to me . I can push my 16' starcraft around when i want to troll and its dirt cheap to fill it lol. The only thing I dont like about mine is that there is no lower cowling, the upper is held on by the fuel tank cap and the guts are exposes below the cowling. Always used to worry about water getting in there but hasnt been a problem so far. Your motor looks mint..nice find!
solopaddler Posted March 6, 2015 Report Posted March 6, 2015 We put a 9.9 on a 10' sportspal with a tiller extension handle thing so you could sit in the middle, and slowly took it up to WOT. It went like a dart, but revved out. A bigger pitch prop would have been interesting. Dont mean to derail the thread but you have seriously got to be kidding LOL!
DRIFTER_016 Posted March 6, 2015 Report Posted March 6, 2015 Dont mean to derail the thread but you have seriously got to be kidding LOL! We once put my buddies 15 on the back of my 12' tinny. Freaking thing went like Miss Budweiser!!!! LOL
northernpike56 Posted March 6, 2015 Author Report Posted March 6, 2015 Since we've determined this motor is Japanese, I'm guessing all wrenches and socket sizes needed will be metric (mm)?
Old Ironmaker Posted March 6, 2015 Report Posted March 6, 2015 (edited) My cousin tried to kill himself and his little tyke by strapping a 20 HP Merc on the back of his 7 foot inflatable and pulled the kid on skis. The only person near death was him when his wife found out that the 7 year old had to sit up front to act as a ballast. Find something an engine can be attached to and man will find a way to race it. I never thought a canoer could be charged for creating a wake in a no wake zone. Great score by the way. That would be a perfect match for Featherstone Teds 90 Mariner as the kicker. $250.00!!!!! Edited March 6, 2015 by Old Ironmaker
northernpike56 Posted March 7, 2015 Author Report Posted March 7, 2015 Today is nice and warm so I filled up a garbage can with water and tried to start my motor in there. Full tank of fuel and it won't start after a bunch of tries. It almost sounds like its not getting any fuel delivered to it, and I'm not seeing any exhaust fumes or smoke. Any suggestions?
northernpike56 Posted March 7, 2015 Author Report Posted March 7, 2015 Yep! Turned on choke when I'm trying to start it, choke off all other times (I heard that you can "flood" an engine by leaving it on?)
lew Posted March 7, 2015 Report Posted March 7, 2015 If you've never seen this motor run it could be alot of different things but start out with the easy things 1st. Check the plug and make sure it's clean then snug it up and be sure the lead is on tight.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now