Bly Posted September 25, 2007 Report Share Posted September 25, 2007 Good morning everyone! Recently my 2 favorite fishing rods were stolen. I have bought one replacement (Fenwick 2pc 6'6 medium) and although it is a fine fishing rod, it isn't quite "right"(*note to Mike the Pike and Greencoachdog...might explain my lack of fish lol), feels "flimsy" compared to my old Fen and it does not seem to like it when I toss a 1 ounce spoon or larger baits. Through this experience I have learned that I prefer one piece rods, still wavering about the 6'6 vs the 7'. Been doing a lot of reading about fishing rods and looking around and now I am at the point where I would like some input from the massive knowledge/experience base that is OFC Looking to get a medium-medium heavy one piece spinning rod Not completely decided on the length Fast.... Lure weight needs to allow for at least 3/4 ounce graphite I am 5'5 and mostly shore fish (will use it from a boat 0ccasionaly), would like to use this rod to fish (cast & retrieve) for pike/musky/those beautiful fall walleye. Looked at a few different ones..shimano, fenwick, and st. croix. Budget minded...would prefer to keep it around the $100 if possible. Thoughts?? Over all experiences with manufacturer/warranty etc.??? Recommendations?? Anything that I may have missed and need to consider?? Thank you and I hope that everyone is not tired of questions like this. Link to comment Share on other sites More sharing options...
ccmtcanada Posted September 25, 2007 Report Share Posted September 25, 2007 I got a new shimano sojourn medium heavy rod, fast action, fiberglass rod....got it cheap at $30 at a local tackle store. I really like it! Oh wait...you bought it for me....forget what I just typed..... Link to comment Share on other sites More sharing options...
Bly Posted September 25, 2007 Author Report Share Posted September 25, 2007 I got a new shimano sojourn medium heavy rod, fast action, fiberglass rod....got it cheap at $30 at a local tackle store. I really like it! Oh wait...you bought it for me....forget what I just typed..... Get back to work so I can afford to buy a good rod!!! Link to comment Share on other sites More sharing options...
Raf Posted September 25, 2007 Report Share Posted September 25, 2007 (edited) 7' MH 1pc, take your pick of manufacturer. The quality will all be similar in that $ range. Find one that feels good in your hands and if possible fit the same reel as you plan on using on it in the store to get a good idea. The spinning rod I use in this class was actually a bit less.. around $60 if I remember right. It is a Daiwa Heartland "Bass" 7' MH 1pc. Personally, I dislike 2 pc rods and have no use for 6'6" or shorter rods. Edited September 25, 2007 by Raf Link to comment Share on other sites More sharing options...
ccmtcanada Posted September 25, 2007 Report Share Posted September 25, 2007 Get back to work so I can afford to buy a good rod!!! LOL Hey now...fiberglass is stonger...sure the sensitivity isn't there, but you gotta get something strong for the next time I slam the car door on the tip..... Link to comment Share on other sites More sharing options...
ecmilley Posted September 25, 2007 Report Share Posted September 25, 2007 i own a couple rods, really would have to go check the out and find one thqat fits you, but two that come to mind are st. croix premier 6.6 mh fast taper i use it for bottom bouncing and casting great sensitve rod, anothe would be a shimano compre anothe great feeling semi-stiff rod great hook sets and feelor or or there is so many just drag your butt over to gagnons and check them out Link to comment Share on other sites More sharing options...
Headhunter Posted September 25, 2007 Report Share Posted September 25, 2007 I have a 6ft 6in Quantum on piece that I use for just about any application it's suitable for... you could pick one up for under $100.00 and I believe that Gagnons sells them. I only mention Gagnons as I know they are close to your home. HH Link to comment Share on other sites More sharing options...
bigfish1965 Posted September 25, 2007 Report Share Posted September 25, 2007 For the pier, I would actually go with a 2 piece 8 or 9 foot. You'll really appreciate the difference when fighting the bigger fish when using a superline. Less strain on the hook hole and greater sensitivity. You'll also be able to feel the lure action alot beter and be able to tell when you've picked up a weed or fouled the lure...you can also adjust your retrieve speed for maximum wobble. Shimano and Fenwick make rods suitable for this. Link to comment Share on other sites More sharing options...
Bly Posted September 25, 2007 Author Report Share Posted September 25, 2007 7' MH 1pc, take your pick of manufacturer. The quality will all be similar in that $ range. Find one that feels good in your hands and if possible fit the same reel as you plan on using on it in the store to get a good idea. The spinning rod I use in this class was actually a bit less.. around $60 if I remember right. It is a Daiwa Heartland "Bass" 7' MH 1pc. Personally, I dislike 2 pc rods and have no use for 6'6" or shorter rods. Thanks Raf Just curious as I have limited experience....why no use for the 6'6 or shorter? Link to comment Share on other sites More sharing options...
Raf Posted September 25, 2007 Report Share Posted September 25, 2007 (edited) Thanks Raf Just curious as I have limited experience....why no use for the 6'6 or shorter? I feel the 7' gives me more casting distance and better control when fighting the fish. The only time I would use a 6'6" or shorter is when vertical jigging and I only do that through the ice or once or twice a year in the spring. Rick also makes a good point re: long rods. I have an 8'6" Shimano Clarus 2pc. It's a "steelhead" rod but I use it for a lot of different things (casting, trolling - planer boards, riggers and long lines) I can't say enough good things about it, very versatile rod. I think it was about $80. Edited September 25, 2007 by Raf Link to comment Share on other sites More sharing options...
solopaddler Posted September 25, 2007 Report Share Posted September 25, 2007 It's impossible to find "one" rod that will do everything you described, but a 7' M/H action is about as close as you'll get. Definitely agree with the choice of a 7'er for most of the reasons Raf already mentioned. As Rick already mentioned, a longer rod in the 8-10' range, is a HUGE advantage when shore casting for salmon and trout. Something to think about since you do a lot of that...(guess you might need to buy 2 rods ). As far as brands around the $100 range go, there's a glut available on the market. My choice in that price range? Hands down the St. Croix Premier. They're a bit more money ($130ish), but a 1000 times better rod than anything else in that price range with a fantastic warranty. (my opinion) Link to comment Share on other sites More sharing options...
fishnsled Posted September 25, 2007 Report Share Posted September 25, 2007 What Raf and Rick said. I don't mind using a short rod when out in the boat or when fishing a small creek or stream. It also depends on what I'm fishing for. The other thing that I noticed this year was what one manufacture would call a medium heavy action would be similar to another’s medium action. You've got to carefully check them out before you buy one to make sure it's what you're looking for. Don't go by the label alone. The night I met up with you and Cliff I was using a 7'10" medium heavy action Diawa Heartland walleye rod. It's telescopic baitcasting rod that has worked get for the Quinte eyes and that salmon from the other night. Note to self...get caught up on posting reports. Link to comment Share on other sites More sharing options...
ecmilley Posted September 25, 2007 Report Share Posted September 25, 2007 forgot the pier fishing thing, you should use a longer rod there. and the shimano clarus would be a resonable priced rod in 8 ft or so length, there is a compre in that lenth as well 8.5 ft just ordered one for planer board fishing Link to comment Share on other sites More sharing options...
lookinforwalleye Posted September 25, 2007 Report Share Posted September 25, 2007 I am partial to Shimano rods resonable price and a liftime warranty. I don`t think you would go wrong with Clarus or a Compre the M/H would be too heavy for some finesse Walleye jigging. Link to comment Share on other sites More sharing options...
Zib Posted September 25, 2007 Report Share Posted September 25, 2007 I usually prefer St. Croix & Shimano rods but I used my buddy's BPS Extreme XPS rod & really like it a lot. It's reg. $100 on sale for $65. Stick with a 1-piece rod. 2-piece have no backbone. http://www.basspro.com/webapp/wcs/stores/s...0002000_100-2-2 Link to comment Share on other sites More sharing options...
Bly Posted September 25, 2007 Author Report Share Posted September 25, 2007 Thank you!! I realize that I have to choose the rod myself but all the input helps! Ecmilley.... I have been in gagnons many times in the past few weeks looking at different rods. They had some new rods in but the choices were still limited...will be going back but thought I would do some information gathering while waiting for new stock. Adding the St Croix and the Compre to the list to check out when they are in I am fairly happy with my pier/salmon rod (9ft) and my trout/float rod (12'6), the new rod will be more for the canoe, few boat trips (not trolling) and other shore areas. In the past few weeks, I have learned a few things about fishing rods... I need to learn to use a baitcaster As Fishnsled mentioned.....there is no standard in the business..one companys medium is anothers medium heavy etc. I need a bigger fishing budget Link to comment Share on other sites More sharing options...
mooseroo Posted September 25, 2007 Report Share Posted September 25, 2007 I need a bigger fishing budget We all need bigger fishing budgets! Every time I read the boards here my wish list gets an item or two longer! Link to comment Share on other sites More sharing options...
bigbuck Posted September 25, 2007 Report Share Posted September 25, 2007 Pop by Tightlines on Brock rd in Pickering. They've got a pretty good selection. Quantum, Shimano, St Croix, Fenwick, etc... would all be around your price range. Find one that you like. Good Luck!!! BTW, keep outfishing your hubby!!! Link to comment Share on other sites More sharing options...
aplumma Posted September 25, 2007 Report Share Posted September 25, 2007 st croix powerglass rods I have been using this series of rods that have been very forgiving as far as abuse and strength. They are priced right and ready for action. Art Link to comment Share on other sites More sharing options...
huntervasili Posted September 25, 2007 Report Share Posted September 25, 2007 (edited) I have an OKUMA "Guide Select" and its a great rod.. Mines 6'6 Med power \rated for up to 15 lb line, and med taper which is good for the all round fishing I do with it. You can also get it in a MH which is most likely what you want if you want to use it for muskie too... Other good stuff is it was under $100 (I know Sam carries em), and best of all it has a lifetime warranty... I have enjoyed using it and its definately a good product, Ohh right and it is a one piece... Good luck on your choice, Bill Edited September 25, 2007 by Bill Parker Link to comment Share on other sites More sharing options...
FinS Posted September 26, 2007 Report Share Posted September 26, 2007 Bly, Ontariocarper has a few rods for sale in the classified section the lightning rod is a good deal check it out Link to comment Share on other sites More sharing options...
Sinker Posted September 26, 2007 Report Share Posted September 26, 2007 Just another vote for the Shimano Clarus rods. I have 4 of them, and love them all. I have from ultra light, to heavy.....all great rods with lifetime warranty. All mine were $100 or less from Gagnons. Sinker Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now