-
Posts
6,926 -
Joined
-
Last visited
-
Days Won
38
Content Type
Events
Profiles
Forums
Store
Everything posted by aplumma
-
Thank you for all of the great pictures Dave. We had kind of a damper down here with the COVID and such so I didn't get out as often as I wanted. We had a really good season down here with the Snakeheads and the Bass. The water temperatures have cooled down to a point where the Snakehead bite is over for the season but next year it should fire up again. As I have said before if you are near the Potomac River give me a shout and we can get after a few of the local species. Art
-
He said Tiller.......lol Art
-
Very nice catch. Art
-
Very nice fish Brian Art
-
Thanks for sharing I am so Far South it is something I will never see unless I get back up North. Art
-
I replace all of my fluids as per the schedule in the book. It is good cheap insurance. The brake fluid of yesteryear dot3 and the new dot5 are different with the 5 being less hydrophobic meaning it stays separated between the dot5 and the water a little better. The down side is it allows the water to contact the ABS system and sensors in the brake system and they rust or become blind. Art
-
The good news is that I have 2 14 gallon fuel cells with a separate tank selector. I put 13 gallons in the left one and fish that one going out and use the 14 gallon tank to get back on. So far I haven't run out of gas yet. I am very happy that gas down here is in the $2.15 a gallon here so I can keep running my 2 stroke gas sucking pig of a motor. Send me a picture of how your seats attached and I can tell you if it will adapt to yours as well. IF so I can send you photos of what I motified to get mine in. Art
-
that extra 32 OZ sure would help it would add another 20 seconds to my gallon of fun. lol Art
-
https://www.overtons.com/tempress-deluxe-bench-set-300614.html?cgid=helm-fishing-seats#start=1&cgid=boat-pontoon-seats%2Fboat-seats%2Fhelm-fishing-seats%2Ffolding-seats These are the seats I put in. The seats on the 89 bolted to a fiberglass lid on the storage area below. I had to redue the brackets and pivots to make it work. It was well worth it because the 89 seats were 1/2 inch thick and snapped into place. These seats give you a hug as well as plenty of padding from the rouge wave. The driver seat can barely touch the trim on the throttle when tilted forward when it is in neutral. The center pee pad seat is actually more comfortable than you think and flipped down allows easy access to the rear casting deck. Art
-
I really like the Ranger 350V it is one of the best riding bass boat I have had. I have quite a bit of weight on my pad of the boat with 3 batteries and the 2 fuel cells on board. The rebuilding of the boat with better seats and accessories did add some weight but it is well worth it. I am content to run at 35 MPH all day long because when you floor it you are burning 9/10th of a gallon a minute. I do like the fact that you can usually get ahead of a storm front if it is not moving to fast. Art
-
Check the boat for deformities on the back edge called a hook. Remove all excess weight that you have stuffed into the boat over the years. Size and change prop to a stainless steel. Out of all of these your biggest gain will be removing all of the extra crap off the boat that you do not use. Realistically you will not gain 10 mph unless you have a major issue slowing down the boat. For example a Ranger boat with 150 HP GTX (racing series motor) stainless cupped prop with little to no extra weight is doing 58 mph with a stainless and loses only 3 mph with an aluminum prop. The bottom of a bass boat in this series runs on just a pad when on plane with about a 6 x 4 ft area actually touching the water. your boat will have a much larger wetted surface and will have less improvement on changes. Art
-
As much as I would love to be up North right now, it is not a good time for our border to be open. I do hope that all of my friends make it through this with the least amount of harm and discomfort. I also wish all of the Lodges get enough support from Canadians to make it through and be open for business next season. Art
- 39 replies
-
- 10
-
This is for news articles to read not comment on. If you want to post something that is not locked that is fishing related then you can post in the main forum. Art
-
Is the complaint that it is not running correctly at WOT or is it you are not getting the same RPMs you were? The drop in MPH could be drive train friction or prop damage. A strike could have damage the drive train creating friction or it could have spun the shear in the hub. I agree new coils are a good idea as the cases get old they can get small cracks in the windings and miss fire internally. We also should look at the timing and the timing advance linkage to make sure it is not binding up and that the screw that limits the advance from over advancing is timing. Both of these require a timing light as well as the specifications of the motor. The final thought is that the metering screws have debris on the end of them that needs to be flushed out. Remove the screw after counting them in and flush them out reset them the same amount they usually do not need to be adjusted to a new setting unless someone moved them. Art
- 15 replies
-
- 1
-
- things to consider
- power
-
(and 1 more)
Tagged with:
-
Nice rig bud looking good. Art
-
Best way to exterminate Mud Wasps
aplumma replied to Old Ironmaker's topic in Non-Outdoors Open Discussion
https://www.raid.com/en-us/products/raid-max-foaming-wasp-and-hornet-killer Art -
You forgot evil laughing and touching myself as we bath in the power we hold. lol Art
-
My rule of thumb is if it is a new brand name item and it is not a personal sale and the price is less than what a reasonable profit margin is then I pass. Art
-
It is a teaser lure that we use in saltwater fishing down here. Save the money and just buy a jitter bug it will work just as well and easier to remove from the fishes mouth . Art
- 1 reply
-
- 2
-
https://www.westmarine.com/buy/raymarine--axiom-9-rv-multifunction-display-with-realvision-and-navionics-north-america-charts--18083642 Here is my next unit I think. Art
-
The Lss1 series is very old technology and it will limit what your new unit can show you if you decide to use it. Basically your new system will not be as good an upgrade as you hope for. This is an adapter that MIGHT make it work with https://www.solidsignal.com/pview.asp?p=000-11040-001 I would upgrade the unit 100 percent with the correct transducer rather than spend 100 bucks for the adapter and then having a limited upgrade. Art
-
Wrap sewing thread around the worm. Art
-
I think we are going to turn on comments and see how it goes. People are posting things that seem to request replies. Hopefully it will go well if it does then we will keep it going if not we will turn them off again. Art
- 1 reply
-
- 3