Cosmos Posted December 3, 2015 Report Share Posted December 3, 2015 Hi guys, I would like to get some help with proper spooling of centerpin reel to fish Niagara river. My current setup is Okuma Aventa 13'6" with spinning reel. I am pretty happy about it. I bought another rod from Kevin(OFC member - thanks again Kevin) to be my backup or primary rod. It's: I do have centerpin which is currently spooled with 330 yards of 6 Lb Sunline Mono, which is too light in my opinion for Niagara. Here it is: I need to know what kind of line should i use on it and also if i do need any backing on it. Where is an old post which is similar to mine but i hope some one can give me more up to date information. Thanks a lot. Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted December 3, 2015 Report Share Posted December 3, 2015 I would run some 20# dacron backing as a cushion and run 12# Raven main line. Then you can run any leader you want on your setup that the rod can handle. Also there is no need for a shot line as you can run your float and shot on the main line. If you break off it will be the leader, just tie on a new one and get back to fishing. This is the set up I run pretty much everywhere I fish with the float rod these days. Link to comment Share on other sites More sharing options...
BillM Posted December 3, 2015 Report Share Posted December 3, 2015 Listen to Dave. That config will work great and won't break the bank (Compared to spooling up with superline) Link to comment Share on other sites More sharing options...
Cosmos Posted December 3, 2015 Author Report Share Posted December 3, 2015 Thank you guys, Another question what kind of dacron line should i buy? Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted December 3, 2015 Report Share Posted December 3, 2015 Just some fly line backing of any brand. Doesn't matter which as it is just there to provide a cushion and help fill the spool up so you don't have to put on 1200 yards of main line. Link to comment Share on other sites More sharing options...
porkpie Posted December 3, 2015 Report Share Posted December 3, 2015 If you have some old junk 20lb test line or something similar, it works just as well as Dacron for backing. Link to comment Share on other sites More sharing options...
Cosmos Posted December 3, 2015 Author Report Share Posted December 3, 2015 If you have some old junk 20lb test line or something similar, it works just as well as Dacron for backing. Like mono or braid? I've heard that mono backing is not good. Link to comment Share on other sites More sharing options...
BillM Posted December 3, 2015 Report Share Posted December 3, 2015 You should never be into your backing anyhow. 15-20lb mono will fill the spool with ease. Link to comment Share on other sites More sharing options...
Ralph Field Posted December 3, 2015 Report Share Posted December 3, 2015 I would remove the line guard unless your proficient at wallis casting. Link to comment Share on other sites More sharing options...
RDR Posted December 3, 2015 Report Share Posted December 3, 2015 (edited) Looks to me that reel has a line guard. Best to remove it if possible, unless you plan on only using a "BC style" swing cast.....https://www.youtube.com/watch?v=zNAUHV1qAk8 Thanks Mooch! No amount of backing will help if you Side or Pull cast with a line guard reel! Mono backing is fine, as long as it is put on carefully. To much pressure can and will deform some spools depending on quality of manufacture of the reel. 150 yards of mainline on top of your backing should be sufficient for any situation Then it is reasonable to change out your mainline a couple of times a season if you fish a lot Beat me to it Ralph...LOL Here comes Dave's response....LMAO Edited December 3, 2015 by RDR Link to comment Share on other sites More sharing options...
dave524 Posted December 3, 2015 Report Share Posted December 3, 2015 (edited) Like mono or braid? I've heard that mono backing is not good. On some reels, mainly those with pillars between the 2 halves of the spool , mono backing has been known to wedge creating pressure and distort the spool causing problems. You are probably OK with machined 1 piece spools but I wouldn't chance it, on reels like Stantons, JW Youngs, Aerials and stuff like that .........No way would I use mono backing. edit: RDR beat me to it by 1 minute Edited December 3, 2015 by dave524 Link to comment Share on other sites More sharing options...
Cosmos Posted December 3, 2015 Author Report Share Posted December 3, 2015 Thank you guys, A lot of useful information - will definitely remove line guard. Link to comment Share on other sites More sharing options...
msp Posted December 3, 2015 Report Share Posted December 3, 2015 I would suggest using the cheap redwolf mono from Canadian Tire. A 1500 yd spool of 10 pound will cost less than $5. I recommend the 10# so that your connection knot is not huge. But you should probably just listen to Dave Link to comment Share on other sites More sharing options...
misfish Posted December 3, 2015 Report Share Posted December 3, 2015 Didnt Mike B, try that sticky one side cork stuff? How does that stuff stand up? Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted December 3, 2015 Report Share Posted December 3, 2015 You should never be into your backing anyhow. 15-20lb mono will fill the spool with ease. "Shouldn't" is the operative word here. In all my years I've only been into the backing once. It was a big hot chrome fish on the Kenai in 2009. By the time I got it stopped and turned it had 200 yds of mainline and 50 yds of backing out on me. Link to comment Share on other sites More sharing options...
Dara Posted December 3, 2015 Report Share Posted December 3, 2015 "Shouldn't" is the operative word here. In all my years I've only been into the backing once. It was a big hot chrome fish on the Kenai in 2009. By the time I got it stopped and turned it had 200 yds of mainline and 50 yds of backing out on me. OK..so just...go home OK Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted December 3, 2015 Report Share Posted December 3, 2015 OK..so just...go home OK Link to comment Share on other sites More sharing options...
misfish Posted December 3, 2015 Report Share Posted December 3, 2015 You should never be into your backing anyhow. 15-20lb mono will fill the spool with ease. Oh come on,theres always us guys with the hero drifts. Man,that floats a ways down there,LOL Link to comment Share on other sites More sharing options...
BillM Posted December 4, 2015 Report Share Posted December 4, 2015 Oh come on,theres always us guys with the hero drifts. Man,that floats a ways down there,LOL Even with my hero drifts there's no way I'm coming close to getting into my backing, lol!! What are those spoons of Nanofil? 150yrds? Link to comment Share on other sites More sharing options...
porkpie Posted December 4, 2015 Report Share Posted December 4, 2015 Like mono or braid? I've heard that mono backing is not good. Nobody used Dacron backing when I started fishing with a float reel a long time ago. Somehow we got by lol. Link to comment Share on other sites More sharing options...
MJL Posted December 4, 2015 Report Share Posted December 4, 2015 Even with my hero drifts there's no way I'm coming close to getting into my backing, lol!! What are those spoons of Nanofil? 150yrds? I saw 300yard spools of Nanofil at BPS this summer...You never know when that fish of a lifetime will hit 3 football fields away Link to comment Share on other sites More sharing options...
Cosmos Posted December 4, 2015 Author Report Share Posted December 4, 2015 Found 1500 yards spool of 12 lb Triline big game line at home. Is this line good enough just to try? I dont care much about it so i can easily spool as much line as i need. Link to comment Share on other sites More sharing options...
porkpie Posted December 4, 2015 Report Share Posted December 4, 2015 Heck use it as mainline. I like trilene XL 10lb for all my mainline for float reels, but I'd give it a go if I had it! Link to comment Share on other sites More sharing options...
Cosmos Posted December 4, 2015 Author Report Share Posted December 4, 2015 Heck use it as mainline. I like trilene XL 10lb for all my mainline for float reels, but I'd give it a go if I had it! Thanks, so what about backing? Should i spool whole reel with this line or still use some backing? Link to comment Share on other sites More sharing options...
porkpie Posted December 4, 2015 Report Share Posted December 4, 2015 It's up to you man, what you have on hand will work just as well as anything, and the price is right. You can always leave a bunch of it on as backing if you don't like it as a mainline. Most people use 20lb just because it requires less to fill the spool. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now