DRIFTER_016 Posted April 26, 2014 Report Share Posted April 26, 2014 Any body used them and have a review for me. Looking at picking up a couple for the boat. They look very similar to the Folbe Advantage rod holders which are quite good. So any OFNers have them or used them? Enquiring minds want to know. Link to comment Share on other sites More sharing options...
captpierre Posted April 26, 2014 Report Share Posted April 26, 2014 (edited) I have two and use them for braid/dypsie rods on Lake O and muskie trolling on the Kawarthas. So far so good. Edited April 26, 2014 by captpierre Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted April 26, 2014 Author Report Share Posted April 26, 2014 Nice!!! If they hold up to sammins and ski's they'll hold up to giant lakers and poikes!!! Link to comment Share on other sites More sharing options...
Tim Mills Posted April 26, 2014 Report Share Posted April 26, 2014 Lots of positive comments about orca s on spoonpullers Link to comment Share on other sites More sharing options...
Old Ironmaker Posted April 26, 2014 Report Share Posted April 26, 2014 I have 2 on my boat Drifter and pull lead core and large dipsies on Erie and Ontario, never had an issue. Buddy caught a commercial net last year no problem. Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted April 26, 2014 Author Report Share Posted April 26, 2014 I'm convinced!!! Going to order a pair in the morning. I have a full set of the power lock holders now but am looking forward to the quick release of the ORCA. Link to comment Share on other sites More sharing options...
Meegs Posted April 26, 2014 Report Share Posted April 26, 2014 Ive got friends that charter on lake o, they swear by them, preffered over the berts track systems Link to comment Share on other sites More sharing options...
Fisherpete Posted April 26, 2014 Report Share Posted April 26, 2014 Yup, they are rock solid. A few friends of mine use them for muskies and salmon, and after seeing how good they were last year I picked up 2 sets for my boat this summer. Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted April 26, 2014 Author Report Share Posted April 26, 2014 Thanks a lot everyone!!! Link to comment Share on other sites More sharing options...
Fishing4Tails Posted April 28, 2014 Report Share Posted April 28, 2014 Awesome product by Scotty !! Orcas are great for all reels spinning or trolling.. Plus Canadian made. I switched a few years ago my riggers to Scotty's no problem and super fast . Link to comment Share on other sites More sharing options...
dave524 Posted April 28, 2014 Report Share Posted April 28, 2014 Lot of guys swear by Down East Salties too. Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted April 28, 2014 Author Report Share Posted April 28, 2014 Lot of guys swear by Down East Salties too. I've seen some of the Down East holders fail and it's not pretty watching your expensive gear fly off the boat. Link to comment Share on other sites More sharing options...
bare foot wader Posted April 28, 2014 Report Share Posted April 28, 2014 happy with mine, they've held up to heavy hits from sturgeon and salmon...I never lock the rods in either and feel comfortable with them bouncing around in some big swells, the rods sit nicely in them Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted April 28, 2014 Author Report Share Posted April 28, 2014 The ones I have seen fail are the clamp on ones. Had guests up @ the lodge bring them up and watched the clamps snap and rods went over board while trolling T60's for lakers. Happened twice in about an hour. Luckily the quick thinking guide instantly did a big circle and managed to catch the downed rod with the other line to retrieve the rod and reel. TWICE!!!!! Link to comment Share on other sites More sharing options...
John Bacon Posted December 18, 2015 Report Share Posted December 18, 2015 The ones I have seen fail are the clamp on ones. Had guests up @ the lodge bring them up and watched the clamps snap and rods went over board while trolling T60's for lakers. Happened twice in about an hour. Luckily the quick thinking guide instantly did a big circle and managed to catch the downed rod with the other line to retrieve the rod and reel. TWICE!!!!! That is scary. Were those the double clamp; or the single clamp model? I may have to start tethering my rods. Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted December 18, 2015 Author Report Share Posted December 18, 2015 That is scary. Were those the double clamp; or the single clamp model? I may have to start tethering my rods. They were double clamp ones. They can't handle the stress of a T60 Flatfish over long periods of use. Especially if you're pounding bottom with them. FYI, I bought the Orca's and they are awesome holders!!!! Link to comment Share on other sites More sharing options...
esoxansteel Posted December 20, 2015 Report Share Posted December 20, 2015 Trolling T60s for Muskies, and I assume Lakers, what happens is the violent shaking of the lure, and in between the violent shaking there is a slight pause, or slack, that causes the S10 Salties to raise, and pop out of there position, and your rod and reel are now heading to the water if not tethered, Trolling normal crank baits there is always a constant drag or pressure which keeps the holder in its place, not with T60s though, as there is that brief pause or slack when things can go wrong Link to comment Share on other sites More sharing options...
chris.brock Posted December 20, 2015 Report Share Posted December 20, 2015 Here's Fishndevil (Shawn) with the Orca. Link to comment Share on other sites More sharing options...
John Bacon Posted December 20, 2015 Report Share Posted December 20, 2015 Trolling T60s for Muskies, and I assume Lakers, what happens is the violent shaking of the lure, and in between the violent shaking there is a slight pause, or slack, that causes the S10 Salties to raise, and pop out of there position, and your rod and reel are now heading to the water if not tethered, Trolling normal crank baits there is always a constant drag or pressure which keeps the holder in its place, not with T60s though, as there is that brief pause or slack when things can go wrong So they are not actually breaking then; just releasing the rod? So, I will probably be fine running dipseys which is my main use for the Salties. Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted December 21, 2015 Author Report Share Posted December 21, 2015 So they are not actually breaking then; just releasing the rod? So, I will probably be fine running dipseys which is my main use for the Salties. No, the ones I spoke about broke. One of the legs broke (the forward one) and before you could get your hands on the rod the aft one would snap. The rod and the bulk of the holder went overboard while the legs and thumb screws ended up in the bottom of the boat. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now