Trailer Wheel bearings

[Sinker]

I have never just changed out bearings/races. Just get the whole hub assembly, and keep the old ones for spares.

 

S.

[NANUK]

Like sinker mentioned, the trick with beating buddies is just to keep enough grease pressure in the hub so the water stays out,

As long as you can rock the front plate with grease zerk side to side, that is enough pressure, Do not add any more grease.

[boombap]

I have never just changed out bearings/races. Just get the whole hub assembly, and keep the old ones for spares.

 

S.

 

Any idea where I can get some in the GTA? Need a backup.

[Fisherman]

Princess Auto.

[Fisherman]

What, my answer not good enough?

[Raf]

 

Any idea where I can get some in the GTA? Need a backup.

cerka in milton

 

http://www.cerka.ca/

[Garnet]

Napa/ Car quest. Just take your old one in.

[AKRISONER]

Princess Auto.

their selection is very limited.

 

 

Cerka is without fail, but if you have a standard 5 bolt 4 1/4?th hub then canadian tire is your best bet by far.

 

My hub was a 3.5 short hub so it had to be ordered from the states.

[Garnet]

The counter guys/gals are good at both Napa/Car Quest. Ton more help than high school pimple at CTC.

[TennesseeGuy]

Timken bearings have been good to me.

 

I always have a new set and a set of good, used ones in a box.

[NANUK]

Timkin bearings and grease is all I use, good stuff,

I get it from Ontario Belting.

[BillM]

Still waiting on the bass report from down south.

[AKRISONER]

Still waiting on the bass report from down south.

 

 

ugh i know! although we did nowhere near as well as we wanted to perhaps thats why the lack of motivation lol. Soon!

[OhioFisherman]

 

 

ugh i know! although we did nowhere near as well as we wanted to perhaps thats why the lack of motivation lol. Soon!

 

LOL, I fished 2 - 3 tournaments at Lake Chautauqua in New York state before I even caught a bass, don't be shy, it can happen to anyone.