Jump to content

Recommended Posts

Posted

I was doing some research and I found this info here...

https://www.bdoutdoors.com/forums/threads/tranx-300-400-301-401.646690/

 

 

 

Tranx 300/400

Tranx%20300_400group_zpscgggxbsn.jpg

The Tranx family is now much larger and more diverse. Shimano created the large low profile reel market with the Tranx 500 model. The addition of the 300 and 400 sizes provides heavy duty low profile reels for multiple applications. We took several steps to improve durability for the saltwater market as well as the demanding freshwater anglers. Available in both right and left hand models in two gear ratios.


Tranx300%20B%20side_zpskzbv0h3o.jpg
The compact body design allows for increased comfort and ergonomics. The physical size of the 300 is smaller than the current Curado 300E. We made the spool slightly taller to improve casting performance. It also aids in line pick up when using a slower gear ratio.

Tranx300-4_zpsdityyesr.jpg
Coreprotect is a feature that we have been using in our spinning reel models for a few years. This is a water resistance design to prevent water entry in susceptible areas of the reel. We have now added this feature to the Tranx 300/400 model reels.

TRX%20worm%20seal_zpskmlf510b.jpg
Worm shaft seal: The first area where water can enter the reel, when sitting in the rod holder taking ocean spray, or while fishing with the reel.

TRX%20AR%20seal_zpsfddxu6zz.jpg
Anti-Reverse bearing seal: This is a common area for water to enter the reel from heavy spray on those rough days. Seals are used on both sides of the bearing to eliminate water from getting into the bearing.

Frame%20seal_zpsmrtuvokh.jpg
Frame Seal 1: The pinion support bearing is a common area for corrosion when used in saltwater. We have made design changes to the spool and frame to eliminate water from entering this area. A special seal was also added to further reduce the possibility of water getting into the bearing and gear box.

TRX%20clutch%20seal_zpsyrhge1py.jpg
Clutch Button Seal: Another common area for water to enter the reel from both spray and use. A seal has been added to the inside to keep water out.

Frame Seal 2: Special grease has been used between the side plate and frame to prevent entry through this area.


A special clutch retention mechanism was developed to prevent the clutch from tripping on a hard cast. We further reduced the chances for the clutch to trip by use of a new carbon handle knob (HG only). This greatly reduces the weight of the handle knob and inertia when casting.

The drag range has been adjusted for use with heavier lines. The drag curve is very steep and is appreciated when fishing with heavy braided line and leaders.

Gear strength and durability has been increased greatly over Curado 300E model.


Hagane body

Aluminum A-side plate (handle side)

Cross Carbon drag

22 pounds max drag (standard model), 18 pounds max drag (HG model)

X-Ship

VBS braking system

Escape Hatch side plate access

5.8:1 gear ratio (Standard) 30 inches per crank

7.6:1 gear ratio (HG) 40 inches per crank

300/301 Line Capacity Mono 12/230, 14/180, 17/150 Power Pro 40/195, 50/190, 65/125

400/401 Line Capacity Mono 12/330, 14/260, 20/160 Power Pro 50/275, 65/170, 80/140

5+1 S-ARB bearings

11.6 ounces (Standard) 12 ounces (HG)

300/301- $279.99
400/401- $299.99

*Available early March* (Fred Hall Show Long Beach for the local anglers)
Left hand models will be available in April

Posted

Still no 500 lefty is a slap in the face in my opinion

 

There are lots of 300 and even a few 400 size lefties on the market already... curado 300s... Calcutta 400s... corvalus... Cardiff... all from shimano already...

 

I'm really disappointed

Posted

300 looks like it replaced the Curado

 

That's what I have heard, 300 Curado's are being dumped in the States, supposedly lots of shops have them on sale.

Posted

Still no 500 lefty is a slap in the face in my opinion

 

There are lots of 300 and even a few 400 size lefties on the market already... curado 300s... Calcutta 400s... corvalus... Cardiff... all from shimano already...

 

I'm really disappointed

 

 

Agreed.

Posted (edited)

 

 

Agreed.

Shimano really has it out for Lefty's. Been wanting a left hand tekota for years....Glad okuma came to the rescue with some slick models. Edited by Spooled
Posted (edited)

I think they're referring to the 500 series model that's got the huge price tag attached.

Edited by Weeds
Posted

I think they're referring to the 500 series model that's got the huge price tag attached.

I am yes. Even the prior model is $700 (or close) still online.

Posted (edited)

I wanted a tranx but hated how it sat on the rod, got a revo beast at sail on sale for $430 and im glad i did, the beast is beast lol. Your loss shimano

Edited by Gallie

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Topics

    Popular Topics

    Upcoming Events

    No upcoming events found

×
×
  • Create New...