limeyangler Posted October 18, 2014 Report Share Posted October 18, 2014 (edited) Hi all, Heading back to Antigua in January. Will only be fishing a couple of spots that i'm familiar with. Both shore venues, both very rocky (sharp coral too). The winds are very strong that time of year so need to be able to fire fairly light clacking raps at least 50yrds. There are some MASSIVE fish that will hit the clacking raps, lost both my lures to successive fish last time I was there, snapped me off like a knife through butter using #30 braid. I was using wire leaders. I'm pretty confident an extra 20# test strength with the drag set right should see me through, as long as the braid i'm using can withstand the rock and coral. Could go the mono route but then line diameter and casting becomes an issue I would think. My goal is to stay as light as possible while actually being able to land a big one. Was thinking of trying a baitcasting reel with heavy braid. Baitcast virgin here. I'm a southpaw so need a left hand reel...Abu Garcia Black Max perhaps? Any thoughts? Edited October 18, 2014 by limeyangler Link to comment Share on other sites More sharing options...
spincast Posted October 18, 2014 Report Share Posted October 18, 2014 sounds like maybe 10 - 15 foot of heavy flouro leader maybe the way to go? If you're new to baitcasters, start practicing now, though. I am finally starting to be able to have outings without the birds nesting in my reel every third or fourth cast - and when you are reaching for distance in the wind - well that's when I spend the most time asking why I ever thought one of these darn snarlfing confounded, aggravatin' things would be worth learning. Sounds like an awesome get away in the deeps of winter - and its on my bucket list for big water sport fish too - look forward to the report Link to comment Share on other sites More sharing options...
singingdog Posted October 18, 2014 Report Share Posted October 18, 2014 You will get more distance with a big spool spinning reel, especially if you are new to baitcasters. Link to comment Share on other sites More sharing options...
davey buoy Posted October 18, 2014 Report Share Posted October 18, 2014 Agreed,big spinning reel for sure.Casting into the wind with a baitcaster is never easy even for the experienced bait caster fisherman. Link to comment Share on other sites More sharing options...
dave524 Posted October 18, 2014 Report Share Posted October 18, 2014 You will get more distance with a big spool spinning reel, especially if you are new to baitcasters. X2 high winds + light baits + baitcaster + newby = recipe for disaster or a lot of frustration Link to comment Share on other sites More sharing options...
Sinker Posted October 18, 2014 Report Share Posted October 18, 2014 Yep, bigger size spinning reel, 50lb braid, with a good fluoro leader. S. Link to comment Share on other sites More sharing options...
BillM Posted October 18, 2014 Report Share Posted October 18, 2014 50lb braid and light baits? That's going to be a lot of fun, lol. 15-20lb Fireline, a good flouro lead and go have fun. Sure you'll bust some fish off but it doesn't matter if you're running 100lb braid, coral will rip that to shreds as well. Link to comment Share on other sites More sharing options...
jeffw Posted October 18, 2014 Report Share Posted October 18, 2014 I have used berkley big game when saltwater fishing. It has excellent abrasion resistance and good shock tippet. Link to comment Share on other sites More sharing options...
Sharkbait22 Posted October 18, 2014 Report Share Posted October 18, 2014 Checkout http://www.pechesud.com/en/ good advice and gear. You likely want a large spinning reel e.g. 6500. Link to comment Share on other sites More sharing options...
Sinker Posted October 18, 2014 Report Share Posted October 18, 2014 50lb braid and light baits? That's going to be a lot of fun, lol. 15-20lb Fireline, a good flouro lead and go have fun. Sure you'll bust some fish off but it doesn't matter if you're running 100lb braid, coral will rip that to shreds as well. 50lb braid is only 12lb mono diameter.....casts no problem with a clackin rap on a spinning reel. 15-20lb fireline is done just reeling in the clacking rap in rocks and coral with toothy fish.......without the fish. S. Link to comment Share on other sites More sharing options...
limeyangler Posted October 18, 2014 Author Report Share Posted October 18, 2014 Thanks for the input guys. Will stay clear of the bait caster, good advice. I think i will continue to use my Shimano Baitrunner reel with a spool of 50-60lb braid and a spool of thicker mono. Link to comment Share on other sites More sharing options...
Joeytier Posted October 19, 2014 Report Share Posted October 19, 2014 Why not run a steel leader? I dont imagine those big predators are at all leader shy Link to comment Share on other sites More sharing options...
limeyangler Posted October 19, 2014 Author Report Share Posted October 19, 2014 Why not run a steel leader? I dont imagine those big predators are at all leader shy Run a wire leader, absolute must with the shark and barracuda present. Link to comment Share on other sites More sharing options...
Joeytier Posted October 19, 2014 Report Share Posted October 19, 2014 Re-read the original post...d'oh Link to comment Share on other sites More sharing options...
Bondar Posted October 20, 2014 Report Share Posted October 20, 2014 (edited) I use a shimano 8000 baitrunner spinning reel with 50lb power pro, use big popper 5"+ a lot to keep baits up high. And the longer bait seems to help keep leaders out of the teeth.Cudas cut through 100lb floro like nothing, I started using the tufline wire lead material Edited October 20, 2014 by Bondar Link to comment Share on other sites More sharing options...
davey buoy Posted October 20, 2014 Report Share Posted October 20, 2014 I use a shimano 8000 baitrunner spinning reel with 50lb power pro, use big popper 5"+ a lot to keep baits up high. And the longer bait seems to help keep leaders out of the teeth.Cudas cut through 100lb floro like nothing, I started using the tufline wire lead material That looks like a nice friendly fish lol.,Must be a blast to catch those REAL toothy fishes!!! Link to comment Share on other sites More sharing options...
limeyangler Posted October 21, 2014 Author Report Share Posted October 21, 2014 I use a shimano 8000 baitrunner spinning reel with 50lb power pro, use big popper 5"+ a lot to keep baits up high. And the longer bait seems to help keep leaders out of the teeth.Cudas cut through 100lb floro like nothing, I started using the tufline wire lead material Wire leader is a must. There are lots of white tip reef sharks about, last year a guy caught ( and killed….not good) a baby thresher shark. I did not have much luck at all…..but have a better idea of what lures to use. I will have a few top waters in my arsenal but the waves and swells (unto 6 feet high) made that method next to impossible. I could find some sheltered spots but with time limited and socializing to do I am kind of stuck on the windward side of the island. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now