ch312 Posted December 24, 2013 Report Share Posted December 24, 2013 Apparently a branch fell recently which tore a 12" hole in the tarp shelter where I store my boat all year. As luck would have it, this hole was directly above my outboard (stored half up with a transom saver in place) which allowed some rain from the recent storm to fall into the end of the prop and into the lower unit. The entire prop is now pushed out about 3/'8" and I can see metal that I shouldn't be able to see sticking out of the lower unit. I can also see ice if I look into the end of the prop. How bad is it? Link to comment Share on other sites More sharing options...
ch312 Posted December 24, 2013 Author Report Share Posted December 24, 2013 If you follow this link: http://www.boats.net/parts/search/Yamaha/Outboard/2006%20and%20Later%204-stroke/F90TLR/LOWER%20CASING%20DRIVE%201/parts.html I believe I am seeing #68 "nut" protruding 3/8" out of the lower unit with fine metal shavings on it. Link to comment Share on other sites More sharing options...
ch312 Posted December 24, 2013 Author Report Share Posted December 24, 2013 Well, nothing beats some 2am cursing and swearing. So far I've discovered that the metal shavings are from the stripped threads of the #68 nut. Worst news so far is the bearing housing #61 is broken. Please don't tell me the lower unit casing is toast... All because a stupid friggin stick tore a hole in the shelter! I think Mr. Tree is going to meet Mr. Chainsaw after this Link to comment Share on other sites More sharing options...
Gnote Posted December 24, 2013 Report Share Posted December 24, 2013 That sucks hard man, my favourite outboard was ruined due to a half frozen lower unit that had sucked up a little water before winter, i would take it to someone who knows what they are doing to get an honest assesment of its condition. Also the sooner you get it warmed up the less damage it can do Link to comment Share on other sites More sharing options...
fishnsled Posted December 24, 2013 Report Share Posted December 24, 2013 I normally park my boat beside the tree in my backyard for the winter. Do to weather and other plans I had not had a chance to get around to doing this yet. Someone was looking out for me as my boat would have been in bad shape with the limb that came down. I would think your insurance should cover the repairs, still sucks though. Link to comment Share on other sites More sharing options...
captpierre Posted December 24, 2013 Report Share Posted December 24, 2013 my condolences saw an outboard yesterday tilted up with some plastic covering the hub. ALWAYS STORE VERTICALLY. can't go wrong. Link to comment Share on other sites More sharing options...
ch312 Posted December 28, 2013 Author Report Share Posted December 28, 2013 I setup the ice fishing heater the same night and let it run all night beside the lower to get all the water/ice out. I'm really hoping the threads of the lower housing aren't damaged and just the threads on the bearing carrier and retaining nut are stripped. Unfortunately, I don't think it's going to work that way If the threads on the lower unit housing are stripped, is there any way of repairing them? Link to comment Share on other sites More sharing options...
Ralph Field Posted December 29, 2013 Report Share Posted December 29, 2013 I cannot remember the proper name , but I was able to repair threads in a stripped spark plug hole with some sort of coil. Perhaps it was called a heely coil ? Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted December 29, 2013 Report Share Posted December 29, 2013 I cannot remember the proper name , but I was able to repair threads in a stripped spark plug hole with some sort of coil. Perhaps it was called a heely coil ? Heli Coil: http://www.stanleyengineeredfastening.com/brands/heli-coil Link to comment Share on other sites More sharing options...
spinnerdoc Posted December 29, 2013 Report Share Posted December 29, 2013 I cannot remember the proper name , but I was able to repair threads in a stripped spark plug hole with some sort of coil. Perhaps it was called a heely coil ? Close. ..helicoil. To the OP sorry for the situation. Hope the insurance are nice about it Link to comment Share on other sites More sharing options...
Sinker Posted December 29, 2013 Report Share Posted December 29, 2013 I can't see this happening from just rain water. Did you check the lower unit before storage?? My engine has sat outside tilted up for the last 20 years, and always has a bit of water/ice in there. Never had an issue. Sorry to hear this, but I have a feeling your lower unit was full of water to start with. I hope I'm wrong..... S. Link to comment Share on other sites More sharing options...
Big Cliff Posted December 29, 2013 Report Share Posted December 29, 2013 I can't see this happening from just rain water. Did you check the lower unit before storage?? My engine has sat outside tilted up for the last 20 years, and always has a bit of water/ice in there. Never had an issue. Sorry to hear this, but I have a feeling your lower unit was full of water to start with. I hope I'm wrong..... S. Ya, somethig not adding up quite right here unless I'm really missing something! Link to comment Share on other sites More sharing options...
Ralph Field Posted December 29, 2013 Report Share Posted December 29, 2013 Thanks Drifter_016 and Spinnerdoc for helping with the proper name (heli coil). Link to comment Share on other sites More sharing options...
lookinforwalleye Posted December 29, 2013 Report Share Posted December 29, 2013 That`s too bad but I doubt rain water did the damage, I mean these things are sealed to prevent water from getting in and oil getting out. Link to comment Share on other sites More sharing options...
aplumma Posted December 29, 2013 Report Share Posted December 29, 2013 I will expect the claim to be denied because the seal if intact would have prevented water from getting inside the housing and doing the damage. I would look into the price for a rebuilt unit rather than repair. The extent of the damage could be greater than what you repair and destruct a second time when you start the fishing season. Art Link to comment Share on other sites More sharing options...
Bernie Posted December 29, 2013 Report Share Posted December 29, 2013 You won't find a heli coil to repair that. I am also thinking that water had to be inside the gear case itself in order to push that out.Usually the case cracks as well. Not a good scenario. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now