Tayzak15 Posted May 7, 2013 Report Posted May 7, 2013 Well since the lakes are just about thawed out up here in Northern Ontario and the river launch is now closed because of the flooding I decided to make a quick walk through video of a lund fury tiller model for anybody interested in buying one. Luckily I was able to take it out once on the river before the launch closed love the boat which is perfect for the rivers, small/medium lakes I mostly fish.
Tayzak15 Posted May 7, 2013 Author Report Posted May 7, 2013 That looks like a fine little fishing rig. Thanks!. I spent all winter researching what would be best for me since about 85% of the places I fish have no maintained boat launch, but I also go onto some of the bigger lakes in the area that a little car topper wouldn't handle when the wind picks up. I could have went with a deep and wide utility, but I decided to go a little over the top and choose this
Moosebunk Posted May 7, 2013 Report Posted May 7, 2013 You'll enjoy your rig and certainly keep pimping it to your needs. Good luck with the fish.
Old Ironmaker Posted May 7, 2013 Report Posted May 7, 2013 You'll enjoy that rig. Now don't scratch it.
fishindevil Posted May 7, 2013 Report Posted May 7, 2013 awesome lund man !!!! welcome to the club !!!!
can u fish Posted May 7, 2013 Report Posted May 7, 2013 That is a nice looking boat Tayzack and well equiped you will definetly enjoy it with all the great fishing you have in your area just make sure you leave a few of those tasty walleye up in the Foleyet area for me lol enjoy. Cheers Mitch......
davey buoy Posted May 7, 2013 Report Posted May 7, 2013 Real nice boat with all the trimmings,enjoy!!
farsider Posted May 7, 2013 Report Posted May 7, 2013 Somethin' about great minds ... My buddy and I just got the 1600 this past weekend. Itchin' for its maiden voyage. Please pm me with any updates or improvements you make or any problems you encounter or solutions you come up with and I will do the same. Tightlines Mark
Sinker Posted May 9, 2013 Report Posted May 9, 2013 A buddy of mine has the 16fter. Nice rig. Seal the drain hole in the cup holder on the port side. The water leaks down into the electrical panel and causes gremlins in there. I see the 14 doesn't have the cup holders, so no issues there. Other than that, she's a great rig. S.
Tayzak15 Posted May 9, 2013 Author Report Posted May 9, 2013 Actually the 14 has 3 cup holders thanks for the info!
Sinker Posted May 9, 2013 Report Posted May 9, 2013 Also check to make sure the hole drilled under your graph was sealed properly. That's where my buds biggest problem with the panel came from. The dealer drilled a huge hole thru the ledge, ran the wires thru, and didn't seal it, so any water that hit the ledge went down the hole, right into the electrical panel. Its also a good idea to drill a drain hole inside the electrical panel box so it will drain. The way its set up, if water gets in there, it can't get out, and rots out the inside of the panel. Have a look at yours and see if its wet. My bud had to have his replaced under warranty. S.
Roe Bag Posted June 7, 2013 Report Posted June 7, 2013 (edited) ****************** Edited July 5, 2013 by kwikfish
Tayzak15 Posted June 7, 2013 Author Report Posted June 7, 2013 Nice rig!, I ended up finding a 25 hp 4 stroke merc 2010 with electric start and power trim for super cheap from one of my buddys upgrading to a 40 himself so I went ahead and bought it off him and sold the 20.
Roe Bag Posted June 7, 2013 Report Posted June 7, 2013 (edited) ************* Edited July 5, 2013 by kwikfish
fishindevil Posted June 7, 2013 Report Posted June 7, 2013 Awesome rig man !!!!! I have a Lund as well with a 50hp tiller !!!!!! And don't worry she will handle some pretty serious water !!!! Enjoy !!! Welcome to the Lund club !!!!!! Tight-lines
JJW Posted June 7, 2013 Report Posted June 7, 2013 Well since the lakes are just about thawed out up here in Northern Ontario and the river launch is now closed because of the flooding I decided to make a quick walk through video of a lund fury tiller model for anybody interested in buying one. Luckily I was able to take it out once on the river before the launch closed love the boat which is perfect for the rivers, small/medium lakes I mostly fish. good looking boat
JJW Posted June 7, 2013 Report Posted June 7, 2013 I have a 16ft lund, it can take serious water if it has to, but...............as we all know safety first. Enjoy
Tayzak15 Posted June 28, 2013 Author Report Posted June 28, 2013 Also check to make sure the hole drilled under your graph was sealed properly. That's where my buds biggest problem with the panel came from. The dealer drilled a huge hole thru the ledge, ran the wires thru, and didn't seal it, so any water that hit the ledge went down the hole, right into the electrical panel. Its also a good idea to drill a drain hole inside the electrical panel box so it will drain. The way its set up, if water gets in there, it can't get out, and rots out the inside of the panel. Have a look at yours and see if its wet. My bud had to have his replaced under warranty. S. Just ran into this issue, opened up the panel and there was lots of water after noticing a couple of my switches wern't working. Had to replace all the connectors as they were becoming corroded. Where would be the best place to drill a hole to drain it?
Sinker Posted June 28, 2013 Report Posted June 28, 2013 Drill a hole in the bottom of the compartment the panel is mounted in. Find out where the water is getting in. My buddies boat, it was the cup holder, and the hole drilled for his graph wiring. His was covered under warranty. S.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now