rob v Posted April 29, 2012 Report Share Posted April 29, 2012 So today I'm replacing my bilge pump and while doing that I knock my transducer by accident with my knee... and you guessed it - busted the darn thing. Not a happy camper. The arm/elbow that holds the transducer body to the bracket cracked in two. It's a plastic arm that just snapped. Transducer body is fine. So now I'm trying to figure out how to fix it without replacing the darn thing. I was hoping to glue the two pieces back together Any suggestions ? I'm thinking some crazy glue or contact cement, but I'm hoping someone else out there has experienced the same thing and can provide me with the benefit of their experience. Link to comment Share on other sites More sharing options...
Sinker Posted April 29, 2012 Report Share Posted April 29, 2012 I did the same thing with the lawn mower. Was cutting the grass and just knocked it right off. Buy a new one. I couldn't get it to stay together. Well, I did....but it always broke again when I needed it most. It was more frustrating than anything! S. Link to comment Share on other sites More sharing options...
mrpike Posted April 29, 2012 Report Share Posted April 29, 2012 So today I'm replacing my bilge pump and while doing that I knock my transducer by accident with my knee... and you guessed it - busted the darn thing. Not a happy camper. The arm/elbow that holds the transducer body to the bracket cracked in two. It's a plastic arm that just snapped. Transducer body is fine. So now I'm trying to figure out how to fix it without replacing the darn thing. I was hoping to glue the two pieces back together Any suggestions ? I'm thinking some crazy glue or contact cement, but I'm hoping someone else out there has experienced the same thing and can provide me with the benefit of their experience. Link to comment Share on other sites More sharing options...
aplumma Posted April 29, 2012 Report Share Posted April 29, 2012 Sorry I got to vote for replacement. The composite plastics are tough to get bonded together. The good news is they are generally less than $100.00. Art Link to comment Share on other sites More sharing options...
mrpike Posted April 29, 2012 Report Share Posted April 29, 2012 Sorry to tell you this but I think you are done like dinner on fixing that one, I have tryed to glue them with no luck at all. soon as I gun the boat BANG !!! its gone again. I wish you luck. Link to comment Share on other sites More sharing options...
irishfield Posted April 29, 2012 Report Share Posted April 29, 2012 I'd have to see where and how it was broken.. but considering a $100 plus replacement I'd be workin on a $2 solution! Link to comment Share on other sites More sharing options...
aplumma Posted April 29, 2012 Report Share Posted April 29, 2012 I'd have to see where and how it was broken.. but considering a $100 plus replacement I'd be workin on a $2 solution! That easy to say when you got a machine shop in the back yard. lol You have the same problem I have here on the farm when someone tells me that its broken I find myself saying "challenge accepted" then spending $200.00 for the tool to fix it because you can never have to many tools. Art Link to comment Share on other sites More sharing options...
rob v Posted April 29, 2012 Author Report Share Posted April 29, 2012 (edited) I'd have to see where and how it was broken.. but considering a $100 plus replacement I'd be workin on a $2 solution! I'm with you Wayne - here's a pci - not sure how well you can see it - but Edited April 29, 2012 by Rob V Link to comment Share on other sites More sharing options...
mercman Posted April 29, 2012 Report Share Posted April 29, 2012 Show us a picture. I bet one of us can come up with a solution Link to comment Share on other sites More sharing options...
rob v Posted April 29, 2012 Author Report Share Posted April 29, 2012 (edited) not sure how this might look... but Edited April 29, 2012 by Rob V Link to comment Share on other sites More sharing options...
ah_long Posted April 29, 2012 Report Share Posted April 29, 2012 You should just buy mine and keep the busted one as a spare... Link to comment Share on other sites More sharing options...
Terry Posted April 29, 2012 Report Share Posted April 29, 2012 I will bet it's a pretty easy fix, but it may not look pretty when you're done a photo or 2 would help Link to comment Share on other sites More sharing options...
irishfield Posted April 29, 2012 Report Share Posted April 29, 2012 I will bet it's a pretty easy fix, but it may not look pretty when you're done Oh.. you've seen my work before!!! Link to comment Share on other sites More sharing options...
SlowPoke Posted April 29, 2012 Report Share Posted April 29, 2012 I did the same thing with the lawn mower. Was cutting the grass and just knocked it right off. Buy a new one. I couldn't get it to stay together. Well, I did....but it always broke again when I needed it most. It was more frustrating than anything! S. That'll teach ya for mounting a transducer on your lawn mower! Link to comment Share on other sites More sharing options...
Skipper D Posted April 29, 2012 Report Share Posted April 29, 2012 where do you find glue that works in water ????????? Link to comment Share on other sites More sharing options...
mercman Posted April 29, 2012 Report Share Posted April 29, 2012 where do you find glue that works in water ????????? Ya have to take it out of the water, then let the glue dry before putting it back in the water. Silly little man Link to comment Share on other sites More sharing options...
Bob Posted April 29, 2012 Report Share Posted April 29, 2012 There is a two part crazy glue or super glue that's designed for hard plastic. The first part is a prep thing and the second part is the actual glue. I've only ever used it once but it worked fine for what I was using it on. Don't remember what that was either. Might be worth a look? Link to comment Share on other sites More sharing options...
Sinker Posted April 29, 2012 Report Share Posted April 29, 2012 I tried all kinds of glues, and epoxies, but they never held up. Hot glue actually held up the longest. I ended up using that transducer for my ice graph, and put a new one on the boat. S. Link to comment Share on other sites More sharing options...
mike rousseau Posted April 29, 2012 Report Share Posted April 29, 2012 Well.... Might be a long shot... But if your gunna toss it anyways... Try melting both sides a bit and put it back together... Should make a strong weld I would think... Link to comment Share on other sites More sharing options...
Skipper D Posted April 29, 2012 Report Share Posted April 29, 2012 (edited) click on picture to see , you can't ruin it .... so drill a new hole , put the bolt back thru it , you might have to shim up both sides with barb type flat washers to keep it locked in place . Edited April 29, 2012 by Skipper " D " Link to comment Share on other sites More sharing options...
blue pickeral Posted April 29, 2012 Report Share Posted April 29, 2012 It's not on the side of the tube, but I'd try using Lepages PLP construction adhesive. Used it on all kinds of materials, including building up layers on the inside of a cracked and leaking toilet tank (dried out and glue built up to 1/4 inch or so)and it has worked magnificently. Perhaps using a 'plastic' glue for the joining surfaces of the crack to hold together, then building an exterior layer with the PLP will give it the strength the bond needs to survive boat speeds in water. Link to comment Share on other sites More sharing options...
Billy Bob Posted April 29, 2012 Report Share Posted April 29, 2012 If this is a glass boat, mount it inside the boat. Link to comment Share on other sites More sharing options...
whiskywizard Posted April 29, 2012 Report Share Posted April 29, 2012 I'd attempt a $5 repair before I replaced it. I'd use one of the kneaded epoxies. Like this. Available at all marine stores, big box building stores and Canadian Tire And I'd drill small matching holes in the broken faces of the 2 parts and dowel them with a steel dowel made from cutting a common nail. Add extra epoxy around the exterior of the neck of the break to build up some extra support. Link to comment Share on other sites More sharing options...
rob v Posted April 29, 2012 Author Report Share Posted April 29, 2012 wow - some great ideas - thanks. Link to comment Share on other sites More sharing options...
misfish Posted April 29, 2012 Report Share Posted April 29, 2012 If this is a glass boat, mount it inside the boat. Yep what BB said. Find a spot on the hull near the transom. Clean and give a light sanding and whip the dust away. Take a small container like a small sour cream plastic container. Cut the bottom out. Place the container on the spot,fill with 2 parts epoxsy. Push the transducer into it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now