Sinker Posted May 1, 2017 Report Share Posted May 1, 2017 I have never just changed out bearings/races. Just get the whole hub assembly, and keep the old ones for spares. S. Link to comment Share on other sites More sharing options...
NANUK Posted May 1, 2017 Report Share Posted May 1, 2017 Like sinker mentioned, the trick with beating buddies is just to keep enough grease pressure in the hub so the water stays out, As long as you can rock the front plate with grease zerk side to side, that is enough pressure, Do not add any more grease. Link to comment Share on other sites More sharing options...
boombap Posted May 1, 2017 Report Share Posted May 1, 2017 I have never just changed out bearings/races. Just get the whole hub assembly, and keep the old ones for spares. S. Any idea where I can get some in the GTA? Need a backup. Link to comment Share on other sites More sharing options...
Fisherman Posted May 1, 2017 Report Share Posted May 1, 2017 Princess Auto. Link to comment Share on other sites More sharing options...
Fisherman Posted May 1, 2017 Report Share Posted May 1, 2017 What, my answer not good enough? Link to comment Share on other sites More sharing options...
Raf Posted May 1, 2017 Report Share Posted May 1, 2017 Any idea where I can get some in the GTA? Need a backup. cerka in milton http://www.cerka.ca/ Link to comment Share on other sites More sharing options...
Garnet Posted May 1, 2017 Report Share Posted May 1, 2017 Napa/ Car quest. Just take your old one in. Link to comment Share on other sites More sharing options...
AKRISONER Posted May 1, 2017 Author Report Share Posted May 1, 2017 Princess Auto. their selection is very limited. Cerka is without fail, but if you have a standard 5 bolt 4 1/4?th hub then canadian tire is your best bet by far. My hub was a 3.5 short hub so it had to be ordered from the states. Link to comment Share on other sites More sharing options...
Garnet Posted May 2, 2017 Report Share Posted May 2, 2017 The counter guys/gals are good at both Napa/Car Quest. Ton more help than high school pimple at CTC. Link to comment Share on other sites More sharing options...
TennesseeGuy Posted May 3, 2017 Report Share Posted May 3, 2017 Timken bearings have been good to me. I always have a new set and a set of good, used ones in a box. Link to comment Share on other sites More sharing options...
NANUK Posted May 3, 2017 Report Share Posted May 3, 2017 Timkin bearings and grease is all I use, good stuff, I get it from Ontario Belting. Link to comment Share on other sites More sharing options...
BillM Posted May 7, 2017 Report Share Posted May 7, 2017 Still waiting on the bass report from down south. Link to comment Share on other sites More sharing options...
AKRISONER Posted May 8, 2017 Author Report Share Posted May 8, 2017 Still waiting on the bass report from down south. ugh i know! although we did nowhere near as well as we wanted to perhaps thats why the lack of motivation lol. Soon! Link to comment Share on other sites More sharing options...
OhioFisherman Posted May 8, 2017 Report Share Posted May 8, 2017 ugh i know! although we did nowhere near as well as we wanted to perhaps thats why the lack of motivation lol. Soon! LOL, I fished 2 - 3 tournaments at Lake Chautauqua in New York state before I even caught a bass, don't be shy, it can happen to anyone. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now