lew Posted August 2, 2015 Report Posted August 2, 2015 Hi guys I've got a riding mower that I removed the mower deck from and just use it for hauling a cart around when I'm moving things. Runs great and I put in a new battery a month ago. I went to use it last week and the battery was dead so I figured I must have left the key on so I charged it up and it ran great. I put it away and left it sit all week and when I went to start it this morning the battery was dead again and I know for a fact the key was in the off position so that's not the problem. I looked at all the wiring as best as I could and can't see any cracked or broken wires that could be shorting out and nothing else is apparent. The ignition has a position to run the lights or not and the key definitely wasn't left in that spot. Any thoughts ??
irishfield Posted August 2, 2015 Report Posted August 2, 2015 Before you get too far, try unhooking the battery for a few days and make sure it's not just a bad one. Once you've determined it's good I'd suspect a draw from a voltage regulator that's on it's way out.
davey buoy Posted August 2, 2015 Report Posted August 2, 2015 It could be your alternator not charging,or something as simple as a bad cell in a new battery.That has happened .
kickingfrog Posted August 2, 2015 Report Posted August 2, 2015 Likely the A/C, stereo/woofer and ground effect lighting system are drawing too much from your battery.
lew Posted August 2, 2015 Author Report Posted August 2, 2015 Wayne, I thought of unhooking the battery once it's charged and let it sit to see if that's the problem, so thanks for confirming it. Any way to test that regulator to see if it's the trouble maker ?
misfish Posted August 2, 2015 Report Posted August 2, 2015 Before you get too far, try unhooking the battery for a few days and make sure it's not just a bad one. Thats where I would start as well.
lew Posted August 2, 2015 Author Report Posted August 2, 2015 Sorry guys, we were all posting at the same time. Davey, the tractor hasn't run since last week so I'm guessing it's something drawing current while it sits idle. And Rob, I'll try running it without the AC next time LOL
Raf Posted August 2, 2015 Report Posted August 2, 2015 and if you can't find the source, and it's not the battery, i'd just put in a kill switch that you flip on and off when you use the mower.
lew Posted August 2, 2015 Author Report Posted August 2, 2015 and if you can't find the source, and it's not the battery, i'd just put in a kill switch that you flip on and off when you use the mower. Which wires would connect to the switch Raf ??
Raf Posted August 2, 2015 Report Posted August 2, 2015 i'd put it in-line with your negative wire coming off the battery.
davey buoy Posted August 2, 2015 Report Posted August 2, 2015 If you have a bad cell Lew,a switch won't help you.I'd try what Wayne said and disconnect for a few days and then check your voltage.That will at least eliminate the battery if it's still reading full charge.
misfish Posted August 2, 2015 Report Posted August 2, 2015 Yup Just pull the positive connecter off the terminal Lew. After a few days, just put it back on and crank it up. No need for pulling the battery out. You will know then if the battery is good or not.
lew Posted August 2, 2015 Author Report Posted August 2, 2015 Thanks guys that's the plan, once it's charged I'll disconnect and let it sit for awhile and then see what happens.
Big Cliff Posted August 2, 2015 Report Posted August 2, 2015 (edited) Actually Lew, pull the negitive cable off the battery, you ALWAYS disconnect the negitive cable first and re hook it last (except in a positive ground system). Reason is that if you did short ground to ground while disconnecting/reconnecting the negitive cable it won't matter, if you were to short the positive cable to ground while the negitive cable is still connected ...... well you'll have a dead short to ground and it won't be nice. A switch in the negitive circuit probably won't do you any good, too much current when starting the tractor, it would take one heck of a switch to handle that load, could be done but not practicle. Check to see if the tractor is charging the battery; just put a volt meter set to DCV across the terminals of the battery and measure the voltage. Then start the tractor, the voltage should read something at or above 13V while the tractor is running, if it doesn't then you probably have a problem with your charging curcit. Try those things first and if you are still having trouble let me know, I could try to drop over one day this week and have a look at it for you. Edited August 2, 2015 by Big Cliff
lew Posted August 2, 2015 Author Report Posted August 2, 2015 Try those things first and if you are still having trouble let me know, I could try to drop over one day this week and have a look at it for you. Thanks Cliff, I'm certainly not a mechanic and don't have a circuit tester but certainly appreciate your offer about coming over. Trouble is, Diane and I are heading to the West Arm of Nipissing on Saturday for a couple weeks of getting slimed and I'll be busy here all week getting things ready. I'm gonna leave the battery disconnected till around Thursday and then try and start the tractor. If the battery is dead again with nothing hooked to it, that'll mean it's faulty and I'll return it for another one. If it starts, that means I've got something draining it and maybe when your not doing anything someday after I get home I'll bring it over to your place and you can have a look....if you don't mind.
misfish Posted August 2, 2015 Report Posted August 2, 2015 Actually Lew, pull the negitive cable off the battery, you ALWAYS disconnect the negitive cable first and re hook it last (except in a positive ground system). Reason is that if you did short ground to ground while disconnecting/reconnecting the negitive cable it won't matter, if you were to short the positive cable to ground while the negitive cable is still connected ...... well you'll have a dead short to ground and it won't be nice. Well I guess doing what I said for a month on the old beater was wrong. It got me by. LOL
bigbuck Posted August 2, 2015 Report Posted August 2, 2015 Lew, we had the same issue with our lawn tractor here at the cottage. Bad battery on a new tractor. Try disconnecting as suggested.
Big Cliff Posted August 2, 2015 Report Posted August 2, 2015 Thanks Cliff, I'm certainly not a mechanic and don't have a circuit tester but certainly appreciate your offer about coming over. Trouble is, Diane and I are heading to the West Arm of Nipissing on Saturday for a couple weeks of getting slimed and I'll be busy here all week getting things ready. I'm gonna leave the battery disconnected till around Thursday and then try and start the tractor. If the battery is dead again with nothing hooked to it, that'll mean it's faulty and I'll return it for another one. If it starts, that means I've got something draining it and maybe when your not doing anything someday after I get home I'll bring it over to your place and you can have a look....if you don't mind. No problem at all Lew, I'd be happy to have a look at it for you! Well I guess doing what I said for a month on the old beater was wrong. It got me by. LOL Your way will work fine, my way is just a little safer
misfish Posted August 2, 2015 Report Posted August 2, 2015 (edited) Yes Cliff. I should of . LOL Lew. You and D have a great relaxing holiday. Leave those big fish alone. You might pull a musle or something. Edited August 2, 2015 by Brian B
lew Posted August 2, 2015 Author Report Posted August 2, 2015 Lew. You and D have a great relaxing holiday. Leave those big fish alone. You might pull a musle or something. Thanks Brian, but the only thing I plan on pulling is those big brutes over the gunnels of my boat
Bernie Posted August 2, 2015 Report Posted August 2, 2015 A quick test I sometimes use in a pinch to find a drain and how much of a drain on smaller machines is to use a couple of fuses. Turn off everything and disconnect negative terminal. Start with a 20 amp fuse, touch one end to battery,other to cable. Ideally, the fuse shouldn't blow. Look for arcing when you touch them together. Then go to a 10 amp, do the same thing. Progress down until the fuse blows, that will give you the approximate amperage drain. Once you determine for sure the drain is below 10amps you should be able to use your multimeter (if you have one) in line to get the definitive number. Reading should be almost zero on anything without radio or computer controls. Even a 1/4 amp is enough to kill a battery over a few days.
lew Posted August 2, 2015 Author Report Posted August 2, 2015 Thanks Bernie but no, I don't have a multi meter but I'll check around and see if a neighbor has one.
porkpie Posted August 2, 2015 Report Posted August 2, 2015 (edited) i'd put it in-line with your negative wire coming off the battery. For an old mower converted to a wagon hauler, this is what I'd do also. They sell switches that attach directly to your battery terminal, then to the battery cable at princess auto for $7. They are designed specifically as a battery cutoff to avoid draining down a battery by accident. Shipping from PA is cheap like borscht also! Edited August 2, 2015 by porkpie
lew Posted August 2, 2015 Author Report Posted August 2, 2015 Thanks porkpie, I'll keep that in mind if the problem isn't with the new battery.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now