Billy Bob Posted September 9, 2011 Report Share Posted September 9, 2011 My Toyota Tundra is down for a brake job.......needs rear brake job. I tried to remove the REAR brake rotor/drum a few days ago and I couldn't budge it...I need to replace the rotors and disc pads on this beast....the friggin tires alone must way at least 100 lbs each... ...I going back in today with a map gas torch and if need be I will borrow a acetylene torch...but does anyone have any other suggestions on seized rotors and how you got them off.....I had a Ford Escape that took me over 3 hours to remove the stupid rotors....only until I got a acetylene torch did the passenger side come loose. Link to comment Share on other sites More sharing options...
Jer Posted September 9, 2011 Report Share Posted September 9, 2011 I thought Toyotas fixed themselves??? The torch should help. Link to comment Share on other sites More sharing options...
outllaw Posted September 9, 2011 Report Share Posted September 9, 2011 please dont let any sparks near the floormats. Link to comment Share on other sites More sharing options...
Jer Posted September 9, 2011 Report Share Posted September 9, 2011 please dont let any sparks near the floormats. Why? Will it make the gas-pedal stick? Link to comment Share on other sites More sharing options...
12footspringbok Posted September 9, 2011 Report Share Posted September 9, 2011 Put the torches away billy bob.... Saw this method a few years back and have kept it in the back of my mind if I ever have another bad brake job experience. Link to comment Share on other sites More sharing options...
scugpg Posted September 9, 2011 Report Share Posted September 9, 2011 I've always used a sledge and hit the back of rotor and just rotate the rotor a bit on each strike. That video is pretty neat though. Link to comment Share on other sites More sharing options...
Big Cliff Posted September 9, 2011 Report Share Posted September 9, 2011 Put the torches away billy bob.... Saw this method a few years back and have kept it in the back of my mind if I ever have another bad brake job experience. Everything is easy when you know how! That was a good video! Billy Bob, you You scared the crap out of me when I saw the title of your post, I thought you ment your new pup not some stupid truck! Oh well, with a little luck you'll have those rotors off in no time now! Link to comment Share on other sites More sharing options...
Bernie Posted September 9, 2011 Report Share Posted September 9, 2011 I'd be a little concerned using the process in that video on some stuck rotors on some cars/trucks. Some rotors are stuck on so bad that doing it in that manner may break off or bend the tabs that hold the caliper. Then replacement of the complete knuckle would be needed. Perhaps applying some pressure using that method and a few raps on the face of the rotor to break the rust would be needed. I have found hitting the face of the rotor between the studs the best way to loosen the rust. But you need to be careful not to hit the studs. Link to comment Share on other sites More sharing options...
12footspringbok Posted September 9, 2011 Report Share Posted September 9, 2011 I'd be a little concerned using the process in that video on some stuck rotors on some cars/trucks. For sure Bernie. Just anothing "trick" to add to the toolbox though. In hindsight the best thing would be to take the rotors off before they're siezed on and put a little dab of anti-sieze between the rotor/hub. Link to comment Share on other sites More sharing options...
cuzza Posted September 9, 2011 Report Share Posted September 9, 2011 (edited) I'd go with the hammer on the back tactic - I have a nice 4lb club hammer which works every time, if they're the 'drum inside' type then in it's probably the shoes holding it on rtaher than any rust. Be careful using a torch near the wheel bearings. ETA - The parking brake is off, isn't it? Edited September 9, 2011 by cuzza Link to comment Share on other sites More sharing options...
mercman Posted September 9, 2011 Report Share Posted September 9, 2011 I told ya not to name your new Pup after your truck I paniced, thinking you were talking about your Puppy Bring your truck to a mechanic, your pup to a vet, not the other way around ya big redneck Link to comment Share on other sites More sharing options...
Billy Bob Posted September 9, 2011 Author Report Share Posted September 9, 2011 I'm ALL DONE... 2 not 1 map gas torches and BINGO.... I did like the video and will keep in mind for the next time... And Paul, I am a mechanic with RA who can still do some work depending on how well I feel.....Went to Alfred State University and have a associates degree in light auto mechanics....but now with almost EVERYTHING being computer controlled, I'm pretty much useless in most aspects of today's modern vehicles.... ...changing brake rotors and pads are not complicated IF you can get them damn rotors off... Link to comment Share on other sites More sharing options...
Billy Bob Posted September 9, 2011 Author Report Share Posted September 9, 2011 Everything is easy when you know how! That was a good video! Billy Bob, you You scared the crap out of me when I saw the title of your post, I thought you ment your new pup not some stupid truck! Oh well, with a little luck you'll have those rotors off in no time now! SO SORRY Cliff....didn't think of it that way.... Little Tundra slept the whole time outside in the shade while I did the brake job....she was so good I'm going to take her to a park to run and run and run so she'll sleep again... Link to comment Share on other sites More sharing options...
blaque Posted September 9, 2011 Report Share Posted September 9, 2011 Brake Pads and Rotors Already?!!! Link to comment Share on other sites More sharing options...
Billy Bob Posted September 9, 2011 Author Report Share Posted September 9, 2011 Brake Pads and Rotors Already?!!! It's a early '07 truck.... Link to comment Share on other sites More sharing options...
Lokka Posted September 9, 2011 Report Share Posted September 9, 2011 (edited) I agree with you in the computer age stuff. It's a pain when you don't have the right diagnostic tools. The car companies are now employing engineers who have a grudge against us mechanics.. you can't get your hand into anything without a cut or removal of everything short of teh engine! VW now has ELECTRONIC parking breaks instead of mechanical.. try to figure that stuff out when it breaks. Edited September 9, 2011 by Lokka Link to comment Share on other sites More sharing options...
blaque Posted September 9, 2011 Report Share Posted September 9, 2011 It's a early '07 truck.... Ahhhh, for some reason i thought it was a newbie Link to comment Share on other sites More sharing options...
adolson Posted September 9, 2011 Report Share Posted September 9, 2011 I also thought this was a dog problem thread. Link to comment Share on other sites More sharing options...
Billy Bob Posted September 9, 2011 Author Report Share Posted September 9, 2011 Ahhhh, for some reason i thought it was a newbie Don't we all wish our trucks stayed new forever... Link to comment Share on other sites More sharing options...
Billy Bob Posted September 9, 2011 Author Report Share Posted September 9, 2011 I also thought this was a dog problem thread. Dog gone it's not.... But Thanks for taking interest.... Link to comment Share on other sites More sharing options...
Billy Bob Posted September 9, 2011 Author Report Share Posted September 9, 2011 I agree with you in the computer age stuff. It's a pain when you don't have the right diagnostic tools. The car companies are now employing engineers who have a grudge against us mechanics.. you can't get your hand into anything without a cut or removal of everything short of teh engine! VW now has ELECTRONIC parking breaks instead of mechanical.. try to figure that stuff out when it breaks. OUCH... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now