AKRISONER

this seems to be a common sentiment, and if the case thats exactly what I am going to do! Im going to princess auto tonight and I hope to buy two entire assemblies, I may even buy both bearing kits as well and then use the one that fits and return the rest!

my buddy has an underpowered 16 foot smokercraft with a 60 on it. the thing cant get on plane with 1 person on the boat, it just frigging bounces around and feels like you are getting into a car crash every time you hit a ripple of water. I hate the damn thing. Also the finishes are garbage, the carpet is wearing entirely off all over the place and the front deck is rotting out. Not a fan at all.

Hey Drifter, I looked through EZ loader's entire line of trailers and I at least found some info relating to the weight capacity and the size of trailer I know the approximate size of the trailer is 14-17foot as we measured the max length of boat it would haul. it appears that the axles on these trailers are all 2000 series? if the weight capacity is 2350 would that matter re:axle size? or is a 2000 a 2000. I also was able to confirm that they are all 5 bolt and I was able to get the bolt pattern so I am getting close! So what I know is that the max length is definitely 17, its definitely adjustable and I 100% know that its a spring and not torsion model. I also now have the VIN number, hopefully someone at EZ loader can give me a hand identifying what size hubs are on the trailer *fingers crossed*

why arent these baits made to be biodegradable? Seriously, its technically illegal to throw plastic in the lake, I am not sure why they have not taken these products the way of golf tees etc and just made them out of biodegradable plastic.

if only it was this simple. I am in a slight snag... The trailer is 300km away...i will be up there on friday, but of course nothing will be open. So that leaves me saturday to hopefully find a bearing in parry sound that will fit. if I cant find a bearing up there I am in big trouble as I need to be back in Toronto for work on Monday with the trailer...I leave for guntersville on thursday morning. I know so little about these bearings that i am praying that they will have one at parry sound canadian tire. What i am really going to press to do is identify the trailer model tonight looking at the ownership and serial number. Hopefully then i can get on the phone with EZ loader and identify the size of either the hub or the wheel bearing. i will then be able to get a hub or wheel bearing down in toronto and simply bring them up north with me. No one on here has a 93-95 ez loader single axle 16-17 foot trailer do they? I am guessing that they would all have the exact same wheel assemblies.

pointe au baril opened up yesterday afternoon. There is still bits of ice floating around but everywhere except tight back bays are 100% accessible now.

interesting call Garnet. Replacing the entire assembly actually looks easier than doing just the bearings! Any recommendations on where to buy? I am going to get the serial number for the trailer tonight and hopefully i can figure out what the heck model trailer it is after calling EZ loader. Thats the tough part, I know its an EZ loader but that basically means nothing.

not ideal because all the shops are closed friday when I will be working on the trailer. I guess i will just have to decide whether or not I want to pull the hub on saturday and race to get it done or wait until monday evening. Anyone have any experience ordering these things? Do crappy can or princess auto typically have them in stock or are they an order and get them the next day type of thing?

Hey Guys, In prep for my trip down to Alabama I am hoping to swap the wheel bearings on my trailer. Definitely a very straightforward job except one catch...how in the heck do i determine what size bearings I need. Ive swapped the wheel bearings and hub assembly on a car before, simple, you just order the right one for your car. But for a trailer how the heck am I supposed to be able to determine the size. I guess if worst comes to worst I could just rip them out and take them somewhere to size match them but that really reduces my window to be able to get them before I leave on my trip. Does anyone know if there is a stamp on the hub assembly, or a way to tell what size wheel bearing I need perhaps the bearing buddy size is an indication? Sorry if this question is stupid I am just a total noob when it comes to trailers. The trailer is an 93-94 EZ loader. Single axle for a 16-17 foot fibreglass boat. If that helps?

so what happens when both teams inevitably get eliminated in the first round lol

you can definitely have the gear on you and not be using it...otherwise bringing pretty much any tackle bag to any national park or any specific lake with lure regs would be in violation. Its almost impossible to enforce that. Definitely wouldnt want a rod with anything illegal tied on though in the boat.

exactly I dont like being force fed BP China brand.

my experience is that they come in lower than BP or cabellas

word up to this post, time to hit napa!

i would still rather be in toronto's position than either the islanders or tampa think about the game against columbus sunday....you are on the road in a meaningless game against a team that has absolutely everything on the line... Its not even my own season ticket holders that I am worrying about. I would bench my entire starting roster, there is no way in hell im throwing my guys out against a team that is clawing at you with every last bit of gas that they have.

save your wood, dont mess around with a bad beaver

what would that entail though? As far as I have seen, catch and possession limits are higher with no closed seasons. I am not entirely sure how looser regs means better management?

I have never understood the USA's lack of closed seasons...hammering fish while they spawn...but maybe its the warmth and the ability for fish to be able to grow quickly that saves you guys.

hopefully this takes the remaining rotten ice off so i can get on some crapolas this weekend.

sorry. not threatened...species of special concern as populations are on decline. and go ahead try slap me...a hunter with an anti hunting label lol.

no one said anything about the cup, except for the fact that ottawa definitely wont win it lol. Also goalie is questionable? he must have got his Andersons mixed up.

i signed a petition a while back to try stop their harvest...it seemed bloody ridiculous that they were still allowing a threatened species to be harvested anyways. Glad to see some action in effect.

IMO come playoffs all bets are off. Totally different game. in the past 32 years only 8 presidents trophy winners have won the cup...thats telling.

i have a cabellas guidewear...i swear by it and would recommend it to absolutely everyone. I friggin love the thing and literally wear it 100% of the time that im in the boat. Anything that I am comfortable wearing 100% of the time and is keeping me safe is worth the money.

funny how far ahead of ourselves we are getting. I almost feel as though unless we finish #2 everyone is going to disappointed. I am beyond thrilled that they are even in the playoff picture, never mind battling for home ice. Its going to be tough, but barring a totally epic collapse, and a subsequent total run by tampa or the islanders...we are in fantastic shape. Leafs literally need one point over the next 4 games to clinch. I see them beating tampa in OT Thursday.