smitty55

Doug the bumpy side creates the channels for air flow. When I used those premade bags it made a big difference in how well the vacuum worked. That's what they told me at the store and they were correct, at least for my Seal a Meal machine.

So my bags were delivered to the door today. Glad I didn't wait, those combo packs are sold out but they still have rolls on sale. Bags seem fine, measured the thickness at .0012", about the same as the Seal a Meal. Only difference is that one side is smooth, similar to the premade bags I had bought before at Capital Cutlery so just have to make sure to put bumpy side up.

OI If I have it right that's the butt section of a fly rod in Speckled Trout pattern. You can see where the reel mounts in the bottom. Spiel I'm just curious as to that wire running through. Is it just for hanging? Lovely work btw.

Great prices compared to buying the Seal a Meal rolls for sure. I just ordered the combo pack of 6 8" 50' rolls and 6 11" 50' rolls for $109 and free shipping. Should last for many years.

Wow, you're better stocked than both main stores and the structures shop at First Air when I worked there. For a while I had those AN part numbers pretty well figured out.

So I've been seeing lot's of posts lately on the edible wild site that folks have been finding puffballs. Usually it's later in the summer or fall after wet cool weather but these recent rains have triggered them. My normal spot didn't have any but I did see some in a farmers field. Anyway out of the blue my daughter shows up with 3 puffballs for me, two were from a spot she had seen them last year and one was on a golf course they had played that same evening. I usually slice them in 1" pancakes and fry them like that but this time I tried something different and were they ever good. I still cut a thick slab but this time I cubed the pieces, gave them a quick sear in oil and then added a pile of my wild garlic compound butter. I'm doing them like that from now on. Dinner last night was venison back straps and Spanish onion finished with that same butter and two slices of cubed puffball. I know whats on the menu tonight again.

https://www.flexpackshop.ca/ Good sale on right now too

Not that they would last that long, but a well sealed vacuum bag will preserve it's contents for years, I've taken three year old pieces of tenderloin that I found on a freezer cleanup and they were surprisingly fine still, the dog was disappointed though hehe.

For many years I worked on a wide variety of aviation motors, both ac and dc, that were used for small galley fans running at 20k to large fans used for cooling radio racks to ventilation systems in aircraft. The main testing done on coils in armatures and rotors was doing an insulation resistance test ( also known a a megger check) and also doing inductance testing on the armature windings. Over the years I noticed that even though some motors would pass these tests, there was a direct correlation between readings on the outer end of the tolerances and lowers speeds and higher current draw in these motors. So by changing out the armature for example, test results were much improved. So offhand I would definitely agree with HH that it's quite possible that your coils are breaking down, if they're not that expensive and easy enough to replace it would be worth swapping them out just as preventive maintenance if not peace of mind. Cheers

So I used these pellets a couple of weeks back. They produce a good solid smoke in the Big Chief but it seems to be faster burning per pan. The one big difference I noticed for sure is that my grills were coated with a film that would take like five sessions with wood chips. I soaked them in the laundry tub and the water was so black, like maybe 2" on the secchi disk at most. Not sure what to make of that, but the result was still great. Maybe I'll mix them with chips next time and see how that works.

Tks, personally I hate subtitles for a whole show so it would have to be dubbed for me. I checked a torrent site and a lot of them have hard coded subs but I'll keep looking.

They are under the small game license, no migratory license required. Non toxic shot.

So does it have English subtitles or is it dubbed and if it is how well is it done? Tks

I put more of the blame on Ford, he's the one allowing them to do it even though he keeps saying he's out to help Ontario residents with their finances, total Bull.

Here's the summary. https://ero.ontario.ca/notice/013-4124 Now to try and figure out a strategy, no one has hunted them before. I also wonder if they would be good bear bait, goose carcasses certainly work well.

Exactly, that ship had helm control so it could maneuver to slow the other one down.

That's correct, the red ship had lost helm control.

When you say the bearing has gone south I take it you mean the built in sensor is shot but the bearing itself is still good. I've had an 01 Sierra 4x4 for some time and have had to replace a few over the years, but it was always the sensor except for the first time. Now I just put up with the abs dash light. So when you mentioned system check I take it it senses an open circuit on start up and flashes the error. And If I have it right it's a 2 wire run along the frame to where it connects to the abs module with some sort of connector. Good to know, I'll have to give those a check. Tks.

No doubt he's definitely making up for the times when the rate was fixed at off peak rates and now we're paying for it big time. My bill this time has doubled but for sure some of it is due to the AC running everyday.

That stuff works great, i just used it on a wasp nest that wifey spotted in the back yard. The trick is to go at night.

No whiskers, I would say Fallfish

I trust you're talking about rat traps, those Victor ones are still the best. Get the bugger!

The owner is Dave Smetana and his wife Cara, they have four young lads. I've known him for a long time but had lost touch after a mutual friend passed away. He used to have his own security business and as well still operates an archery only deer camp on 500 acres of private land not too far from Innisville. All American clients. Real nice guy, super hard worker that goes way out of his way to keep clients happy. He bought the place in 2014 and hasn't looked back. Won awards in his first two years and Canada in the Rough and Extreme Angler have done shows there. Not just fishing, he also runs bear baits. I wouldn't hesitate to give him a call to get answers to your questions. Looks to be booked up for the most part till September from what I see on his website. https://www.olivethelake.com/ Here's a short video from Keith Beasley up there before Dave bought it.

I would suggest you contact Rocky's Reel Service and show them the pic of that spring. As mentioned it seems to be a fairly heavy spring that appears to be for keeping tension on some assy. Good luck.

A little psa here. Independent Grocer has whole briskets points on sale for $3.00lb ($40-$45) and trimmed pieces packaged up for $4 lb. ($22 range) Meat manager said he can hardly keep it on the shelves, considering it's way cheaper than burger even. He had to put one aside for himself to smoke. So I'm leaning towards doing them up in a brine with a #1 cure, so basically a corned beef and then smoke it. From what I'm seeing the prague powder isn't necessary but then it isn't considered corned beef and won't have that red colour and different flavour. Smokingmeatforums.com is a good place to wander around, check out post #27 in this thread. https://www.smokingmeatforums.com/threads/to-brine-or-not-to-brine-a-brisket.89757/page-2 Cheers