Fisherpete Posted July 12, 2010 Report Posted July 12, 2010 (edited) The last few times out, the "QUEST FOR 50" has been taking on some water... no big deal as I have a bilge pump installed, but annoying nonetheless... I did the water test in the driveway, and found a few leaking rivets. One is REALLY bad, pretty sure it needs replacing. Water was gushing out from that one. There is a second also in pretty bad shape, able to spin it freely, but may still be able to be tightened. A few others should also probably be snugged up. I'm in Scarborough, is there anyone who has a proper boat-type rivet gun around? I can bring the boat there, and don't mind paying for your time. Wayne (Irishfield) has offered to help me out before (don't know if that offer is still on the table, lol!), but if there is someone closer that would save a bunch of time and gas... I seem to remember somebody helping out CCMT with his new-used boat last year, similar issue... My other thought was to drill out the two really bad ones and replace them with stainless steel pan head bolts/nuts of the appropriate size... goop some 3M 5200 marine sealant in there at the same time. Is this a viable repair option? Thanks for your help guys. Edited July 12, 2010 by Fisherpete
irishfield Posted July 12, 2010 Report Posted July 12, 2010 Offer was on the table until Leah and I headed North and as it was we left 7 weeks late! You should have taken a day off from fishing.... I was only coming home to get my airplane.. but now have my older brother in the hospital for an Angiograph/plasty tomorrow. Pending what the final outcome is there, hopefully tomorrow he'll be stinted and ready to go, I might be able to squeeze you in quick Tuesday or Wednesday am before I fly back to the lake. Otherwise you need to find someone else. Two ball peen hammers will buy you some time..
Fisherpete Posted July 12, 2010 Author Report Posted July 12, 2010 (edited) Thanks Wayne, if nobody closer is available, let me know if you will be around Tues/Wed. The one rivet is beyond hammering, there is not much left of the head. Is the stainless bolt/nut/sealant a bad idea? I found that suggestion searching the web... Take a day off from fishing? To keep the boat from sinking? SACRILEGE! Edited July 12, 2010 by Fisherpete
OhioFisherman Posted July 12, 2010 Report Posted July 12, 2010 (edited) No idea if this is any help to you, I have seen sealed head pop rivets. The part that the shaft goes through has a sealed head, which I assume is to prevent liquids from flowing through. No idea where you might find them in your area though. A nut and bolts supplier? My personal preference would be to have it fixed right the first time though. http://www.bylerrivet.com/products/blind-rivets.aspx Edited July 12, 2010 by OhioFisherman
vinnimon Posted July 12, 2010 Report Posted July 12, 2010 If your going threw the hammer,I can help you out Pete.
wormdunker Posted July 12, 2010 Report Posted July 12, 2010 I used JB Quik weld on my leaky rivetts. Worked very well. Buy at CTC, mix the parts together as per instructions - no leaks!!
Uncle Buck Posted July 12, 2010 Report Posted July 12, 2010 J&J prop repair re-riveted the bow on my legend... doesn't leak a drop now... he's in Caledonia though...
Rob Posted July 12, 2010 Report Posted July 12, 2010 J&J prop repair re-riveted the bow on my legend... doesn't leak a drop now... he's in Caledonia though... What do they charge for doing that Uncle Buck? I am thinking of a complete riveting job on my Legend, or I might just trade her in for a new one. Rob C
fishnsled Posted July 12, 2010 Report Posted July 12, 2010 What do they charge for doing that Uncle Buck? I am thinking of a complete riveting job on my Legend, or I might just trade her in for a new one. Rob C Here is his website. J and J Marine Looks like they do some nice work. Give them a call and they'll have be happy to help you out.
irishfield Posted July 13, 2010 Report Posted July 13, 2010 Sorry Pete.. I'm out.. brother had his Angio today and couldn't be stinted. He is now scheduled for a quad or quint bypass late Wednesday or early Thursday.. so I'll be there. Need the bit of time I have in between to get my own repair work done here and stuff ready to go back up North.
Roy Posted July 13, 2010 Report Posted July 13, 2010 Thoughts to your brother, Bud. He'll be fine I'm sure.
Fisherpete Posted July 13, 2010 Author Report Posted July 13, 2010 (edited) No probs Wayne... as it turns out, I would not have been able to make it anyways - my mother in law, who has been battling cancer for the past nine months, has taken a turn for the worse. The doctors have not given her much time (probably only a few days). Fishing will be on the back burner for the next little while. Hope all goes well for your brother. Edited July 13, 2010 by Fisherpete
johndox Posted July 14, 2010 Report Posted July 14, 2010 Jim at J and J is a fishing friend of mine and does some very good work dont be afraid to give him a call. It is only just over an hours drive from Scarborough and you can stop on the way home and do some fishing. Lots of great fishing between here and there.
camillj Posted July 14, 2010 Report Posted July 14, 2010 Sorry Pete.. I'm out.. brother had his Angio today and couldn't be stinted. He is now scheduled for a quad or quint bypass late Wednesday or early Thursday.. so I'll be there. Need the bit of time I have in between to get my own repair work done here and stuff ready to go back up North. Hey Wayne, keepin all fingers crossed and little prayer your brother bud !
irishfield Posted July 14, 2010 Report Posted July 14, 2010 Thanks Jon ! Same for Pete's Mother-in-law. He and his wife's family are in for the harder ride.. Brother is now scheduled for noon tomorrow.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now