glen

I used the swivel ease, 3/4" pin mounts from crappy tire. I like them. You can sit high or low by pulling out the 13" long pin.

Do you have to check the bolts holding your new car together? Buying a new trailer and having loose bolts is absolutely criminal.

"Cars, passenger vans and SUVs are not permitted to tow more than one trailer or one vehicle." You would be over the tow limit on these vehicles anyway. I think it is legal and i have seen people do it. Must be a pain though.

http://www.crestliner.com/images/boatmodels/1700FH_SC.jpg Fish Hawk 1700 SC

I wish i lived closer to st clair. Beauty fish. Thanks for the report.

Nice looking fish. Thanks for the report.

Why would you need to check the bolts on a new trailer. That is nuts. Maybe the people building the trailers should check them. I didnt know it was some assembly required on a new trailer. Just buy a trailer and put it together yourself.

Wow that is unreal. The boat is aluminum so it wont rust. Because the boat is new i would take it in at the end of the season and have it repaired by the pros. Next time go in and get the coffee.

Thanks Wild. It will come in handy if the dollar drops.

I hope someone catches it during the GTG.

Nice looking fish. Congrats.

A two meter wave took this unsinkable 8 meter, $300,000 boat to the bottom. The Ugly Too. It should have been the called the Ugly Rock cause it sank like one.

Very nice looking fish. WTG Jedi.

The best thing to do is to follow the manual that came with the motor. When i change my oil i measure out the amount as per the manual. I think it is 1.3L with a filter change. Also never lay that motor down on the wrong side.

That a boy Rich. Great report as always.

Thanks Mike.

Not working for me either.

Awesome fish Mike. Mike you could post a story of how your fishing day was and how you landed this brute. We would all like to read it and then you would also have the story to tell other people as the years go by.

If you have the clearance it is better to tow with the motor all the way down. If you dont have the clearance and you have to tilt the motor then you need the transom saver.

That may be the answer. I am still thinking though.

The seat box is in the way Johnny. But it would really open the boat up if i put the passenger seat on a pedestal. I am going to try the rods there now.

When i am out fishing it would be nice to have a place to put the rods when moving from one spot to the next. I fish from the back and i just lean my rods on the floor and up over the rear casting deck. The front is more of a problem cause there is less space. I tried the vertical tube holders but they can get in the way. I am thinking of putting some padding in one of the corners so the rods can be propped up there. If there is a good answer to this problem i would like to hear it. Thanks for any help.

Now the boat will go faster.

WTG guys. Good job with the pictures too.

Thanks for posting the pics of the pics. I will let you know when we can get out again.