Fisherman

That's so they can get ya coming and going..

Some people can drive and not break things, others wish they could.

There are other places that are cheaper, but if you don't want to travel a bit. http://www.highlandtrailers.com/

Mine went up about $50 already this year for a 3/4Ton. Drivers licences also go up.

Needless to say you could probably post all the co-ords in red here, I don't think anyone is going to go and swipe your secret spots. Not after they show you how they fish farm over there.

How to put Long/Lat Coordinates into google maps Type the title of your quest into google, instructions are there.

What I don't get is that municipalities allow people to build homes that close to the water. You build a house by the water sooner or later you're going to get wet. You step in a cow pattie your foots going to stink, you eat jalapinos, your butts going to burn, etc. I say too bad so sad.

never mind, computers fubar.

Maybe St Elmo's fire. Static

I wonder what Vladimir would say..

If ya don't know, ones tasty and the other might be if it just came out of the shower, depending on age.

What kind of boat, aluminum or fibreglass. If it's fibreglass you may have a chance that it's layered and not be 100% solid. Any amount of porosity degrades the transducer signal. If it's aluminum, you have a better chance of getting the signal through and back. Don't forget, there are specific transducers designed for use through the hull. If you are bound and determined, I would use epoxy. The only problem is getting the right angle. Everything changes when the boats in the water, how many people and kit, trolling speed/high speed, it changes the "angle of dangle" of the transducer. Personally I wouldn't, it's much easier to mount it on the rear and you have easy access to change the side/side and front/rear angles as needed.

Not a fan but to each their own. Anyway, you may also find the serial number embossed on the motor block somewhere under the cowl. Unless you tilt the motor up, looks like the skeg is pretty close to the road. On second look, I would rather have a high transom model, any substantial waves following you might just wash in on the back.

Wonder what ever happened to the interchange they were supposed to make around the old McDonalds they tore down, that was supposed to allow access to the back of "Park Place".

Yes, there's a bunch of numpties for sure that designed the Moson Pk/400 interchange. They should have put the off/on ramp behind Costco to come out at the next lights east, there's far too many unsynchrinized lights there. Same with that cluster at the bottom of Essa, should have the off ramp run into Little and then close the rest of it, one less light to cause delays. I'm waiting for the the 400/Duckworth replacement, that'll be something to see.

Nice boat, if you get it, put the larger 12" tires on the trailer, props almost on the ground, then tie a 50' piece of rope to the motor, there's your anchor.

Craig, if you made this up there's not enough prepH to shrink things, you'll be like a baby in jail waiting for Bubba. Just joking, best news we can get up here.

Seems like it's becoming more common every day. And they wonder when they get laid off because sales are diminishing.

For those that have been holding off for a good deal, Princess Auto has a one day sale, 30 July only. CTEK charger for $40.

Well if it's a "he" sasquatch, I guess I'll cut some more wood for him, if it's a "she" sasquatchie, maybe I'll douse the neighbouring camper in some of that AXE aftershave and she can have her ways with him.

Well at 45 years old my Ariens snowblower gets put away dry every spring, bone dry carb and hose, it starts, on the first pull. Everything else gets put away dry in the off season, to each their own, Ice auger, 22years, chain saw 14, outboard, 17, does it seem to indicate a trend that works.

Hahaha, someone else gave me the idea of drilling a couple holes and stuffing them with gunpowder. That should pretty much give away the culprit.

Okay thanks, maybe I'll have to take a run down to the local hunt shop and see how much of a flash it gives.

Ya, I realize degrading is going to occur from the inside, that's where the gas flows.