siwash Posted March 26 Author Report Posted March 26 Terry do you think I should put a new platform right across that bow or just fill in the gap? If so, what would be the best approach?
Terry Posted March 26 Report Posted March 26 I think just making a platform for the open spot would work perfectly and if you re carpeted it it would look great but if you want it to look the very best a whole platform would most likely look best 1
CrowMan Posted March 26 Report Posted March 26 Are you primarily a Largemouth guy ? Following the shore line and pitching to cover ? Or you're more Smallmouth, Walleye, Musky, Lake Trout...structure and off shore fishing ? If it's all about Largies...then yes, Fortrex is fine. However, if you're into multi-species (in my opinion) I wouldn't forgo Spot Lock....it's a legitimate game changer and will most definitely put more fish in the net.
siwash Posted March 26 Author Report Posted March 26 19 minutes ago, Terry said: I think just making a platform for the open spot would work perfectly and if you re carpeted it it would look great but if you want it to look the very best a whole platform would most likely look best Yeah matching the carpet would make it look good but if I put an entire piece across it'll be strong and stable and I can carpet it (or vinyl). The floor is vinyl. Thanks
siwash Posted March 26 Author Report Posted March 26 21 minutes ago, CrowMan said: Are you primarily a Largemouth guy ? Following the shore line and pitching to cover ? Or you're more Smallmouth, Walleye, Musky, Lake Trout...structure and off shore fishing ? If it's all about Largies...then yes, Fortrex is fine. However, if you're into multi-species (in my opinion) I wouldn't forgo Spot Lock....it's a legitimate game changer and will most definitely put more fish in the net. Multi species, Crowman. I have only recently gotten back into fishing (2 years ago) after spending most of the last several years hunting. Right now, I like the variety. I probably catch smallies and pike more than anything else. I will look for a spot lock. 2
CrowMan Posted March 26 Report Posted March 26 Curious...in your photo what is the piece of 2x4 under the bottom of your console ? Also, what's in the in-floor compartment in the bow ? Is there a spot in the boat for two 12v batteries ?
siwash Posted March 27 Author Report Posted March 27 8 hours ago, CrowMan said: Curious...in your photo what is the piece of 2x4 under the bottom of your console ? Also, what's in the in-floor compartment in the bow ? Is there a spot in the boat for two 12v batteries ? Two batteries in the back, yes. There is some finishing I have to do.
siwash Posted March 27 Author Report Posted March 27 This can't be legit, can it? It's AliExpress, so.... https://www.aliexpress.com/item/1005006446108373.html?src=google&src=google&albch=shopping&acnt=631-313-3945&slnk=&plac=&mtctp=&albbt=Google_7_shopping&albagn=888888&isSmbActive=false&isSmbAutoCall=false&needSmbHouyi=false&albcp=20230809302&albag=&trgt=&crea=en1005006446108373&netw=x&device=c&albpg=&albpd=en1005006446108373&gad_source=1&gclid=CjwKCAjwh4-wBhB3EiwAeJsppCEpA5_sWjrOFGatHEaSyWiu4J4iSFiqdJZFCGyxlVjUi8Z368EPlBoC-noQAvD_BwE&gclsrc=aw.ds&aff_fcid=c48c64e4d1f8499cb3c1816216322566-1711541605352-01515-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=c48c64e4d1f8499cb3c1816216322566-1711541605352-01515-UneMJZVf&terminal_id=ad7b430a6e064edd96ecc77207705987&afSmartRedirect=y
CrowMan Posted March 27 Report Posted March 27 Product in Brazil Origin...Mainland China 602 is an Arizona area code They accept Bitcoin for payment. But hey, that Shimano Stella spinning reel (retail $800) listed just underneath...for only $24 looks like one helluva deal ! What's the saying...if it's too good to be true...
BillM Posted March 27 Report Posted March 27 2 hours ago, siwash said: This can't be legit, can it? It's AliExpress, so.... https://www.aliexpress.com/item/1005006446108373.html?src=google&src=google&albch=shopping&acnt=631-313-3945&slnk=&plac=&mtctp=&albbt=Google_7_shopping&albagn=888888&isSmbActive=false&isSmbAutoCall=false&needSmbHouyi=false&albcp=20230809302&albag=&trgt=&crea=en1005006446108373&netw=x&device=c&albpg=&albpd=en1005006446108373&gad_source=1&gclid=CjwKCAjwh4-wBhB3EiwAeJsppCEpA5_sWjrOFGatHEaSyWiu4J4iSFiqdJZFCGyxlVjUi8Z368EPlBoC-noQAvD_BwE&gclsrc=aw.ds&aff_fcid=c48c64e4d1f8499cb3c1816216322566-1711541605352-01515-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=c48c64e4d1f8499cb3c1816216322566-1711541605352-01515-UneMJZVf&terminal_id=ad7b430a6e064edd96ecc77207705987&afSmartRedirect=y If you have to ask....
siwash Posted March 27 Author Report Posted March 27 Everything is produced in China today isn't it?!!
siwash Posted April 1 Author Report Posted April 1 I came across a Terrova but the transducer not longer works. Can these still function without them? Can I replace the transducer (i.e is it even worth it?). Thanks!
AKRISONER Posted April 1 Report Posted April 1 36 minutes ago, siwash said: I came across a Terrova but the transducer not longer works. Can these still function without them? Can I replace the transducer (i.e is it even worth it?). Thanks! Simple answer, yes the 2d universal sonar transducer is only useful if you intend to use it with your other humminbird electronics. they are most certainly replaceable, and if you have newer modern electronics, you’d most likely be installing your own transducer anyways. 1 1
BillM Posted April 1 Report Posted April 1 5 hours ago, siwash said: I came across a Terrova but the transducer not longer works. Can these still function without them? Can I replace the transducer (i.e is it even worth it?). Thanks! Sure, worse case is you slap on an external transducer. Simple stuff. 3
CrowMan Posted April 1 Report Posted April 1 5 hours ago, siwash said: I came across a Terrova but the transducer not longer works. Can these still function without them? Can I replace the transducer (i.e is it even worth it?). Thanks! More often than not, it's the transducer cable (that runs along the shaft of the TM) that got pinched or damaged. Been there, done that. Easy fix.
siwash Posted April 16 Author Report Posted April 16 the boat I just picked up has an older MK Powerdrive. I've heard the heads can be replaced to make the spotlocks. Is this correct?
AKRISONER Posted April 16 Report Posted April 16 8 hours ago, siwash said: the boat I just picked up has an older MK Powerdrive. I've heard the heads can be replaced to make the spotlocks. Is this correct? There’s some third party products that essentially connect with your phone that you install onto the trolling motor to effectively make them have iPilot. not sure if they are available for the first gen power drives. https://pronavmarine.com/alternative-to-the-minn-kota-i-pilot-link-add-on-gps-autopilot-for-bow-mount-trolling-motors/ 1
siwash Posted April 16 Author Report Posted April 16 (edited) looks interesting. When shopping for a used one, should I be looking for anything with 'ipilot'? Or am I looking for anything else? Edited April 16 by siwash
porkpie Posted April 16 Report Posted April 16 (edited) 8 hours ago, siwash said: the boat I just picked up has an older MK Powerdrive. I've heard the heads can be replaced to make the spotlocks. Is this correct? The motor in the photo that you have displayed in your other post of your new boat can’t be upgraded to a Minn kota ipilot head unit. Only the black V2’s and upwards can be. I’ve “heard” of some V1 conversions but I’m not sure how reliable that is. Yours is pre V1, or basically the original MK bow mount. For the money people are asking for used, I’d be looking at a 2016 plus MK. As I’d mentioned in a previous post, my MK is in Aikmens for repair and he mentioned to me that anything other than the latest gen MK’s he’s been told motherboards have been discontinued. Edited April 16 by porkpie 1
siwash Posted April 16 Author Report Posted April 16 So I'll look out for a newer motor - hoping to still nab an ipilot.
Fishing Rod Posted April 17 Report Posted April 17 I had a 24V/80lb Terrova on my 169 with spot lock and ipilot and it was a game changer. You don't need the transducer built in.
siwash Posted April 18 Author Report Posted April 18 5 hours ago, Fishing Rod said: I had a 24V/80lb Terrova on my 169 with spot lock and ipilot and it was a game changer. You don't need the transducer built in. What do you think of this? https://www.facebook.com/share/9XJT4C3Zd2i3rJZk/?mibextid=79PoIi
siwash Posted April 18 Author Report Posted April 18 (edited) So the current motor is 45" shaft. Can you get away with a 60" (can these be adjusted?) ? I'm assuming that you want avoid the blades too high up in the water column.. but deeper in the water it'll still function properly? Edited April 18 by siwash
CrowMan Posted April 18 Report Posted April 18 (edited) Yes, the depth the motor head/prop sits below the surface of the water is completely adjustable on a TM. Longer is always better than shorter. If too short, the prop may not get enough "bite" for maximum power/control. If the water is shallow or extremely weedy where you're fishing, you can bring the motor up higher, as needed. Not sure how high the top of that bow is off the water, but 45" is probably the bare minimum for that boat. A 60" should be fine, if not preferable. Edited April 18 by CrowMan 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now