Gardenpatch Posted July 3, 2019 Report Posted July 3, 2019 Hello I was wondering if anyone could help me with my minn kota ipolt lock spot. Every time I hit lock spot on the trolling motor the motor goes back and fourth and then spins till the cord is completely wrapped around all the way till I shut it off. If it doesn't do this it clicks into 9th gear and takes off till I shut it off. Anyone happen to know how to fix this ?
porkpie Posted July 3, 2019 Report Posted July 3, 2019 (edited) I have found spot lock works best if I ease up to the location and don’t use it until I’ve slowed down, it makes the whole spot lock thing less violent. Have your batteries tested and replace the battery in your remote: I’ve occasionally had the head wrap thing but the other items you mention would cause me to be concerned. I have had intermittent performance issues with my motor if the battery is near dead in the remote. If that fails, take it to aikmans sports in Mississauga, they are a Minkota repair facility. Edited July 3, 2019 by porkpie
misfish Posted July 3, 2019 Report Posted July 3, 2019 1 hour ago, porkpie said: I have found spot lock works best if I ease up to the location and don’t use it until I’ve slowed down, it makes the whole spot lock thing less violent. I have a spot lock anchor. It has 200ft of rope. Never let me down.
Freshtrax Posted July 4, 2019 Report Posted July 4, 2019 spotlock on mine is a tackdriver. sorry not much help with yours. but yea if you hit spotlock while moving it will take ya back to where you hit it. do you have the seperate white puck compas dohicky on yours?
BillM Posted July 4, 2019 Report Posted July 4, 2019 (edited) Make sure the software is up to date on the unit. Does yours have a heading sensor? (White puck) I've also read about the wiring inside the control head being wrong from the factory. You wanna make sure the power cable are all bunched up on one side of the head, some guys have opened theirs up and the power cables make a big circle around the control head which messes up the heading sensor. Edited July 4, 2019 by BillM
JoshS Posted July 4, 2019 Report Posted July 4, 2019 It does gun it sometimes to get you to the lock spot and in the process the cord sometimes does one wrap around the shaft as motor shuffles to get you on the spot. I noticed it happens for obvious reasons like when hit going fast or windy. We just live with the wrap and unwrap when you take off. I have a PD but my buddy who I fish with got a new rig with a terrova and we fish out of that now... spot lock is a game changer... amazing. I heard the new terrova's have improved spot lock.
boombap Posted July 4, 2019 Report Posted July 4, 2019 (edited) What year spotlock? My 2017 terrova is dead on. My old power drive was a hit or miss. edit: the heading sensor that the new terrova/ultrex comes with has nothing to do with spot lock Edited July 4, 2019 by boombap
Gardenpatch Posted July 4, 2019 Author Report Posted July 4, 2019 Tried to switch out the batteries and didn't work. I must have to get it fixed. I don't not have a white puck . I tried it again today and did the same thing. Thanks for the tips
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now