Basschaser77 Posted February 21, 2015 Report Share Posted February 21, 2015 My buddy and I have an Elite-4 and a M68C and when we fish in the same hut we seem to have interference issues. The hut is 6 x12 feet and we are at opposite ends. Tried playing around with noise rejection and other settings but does not help much. Any tips would be much appreciated. Link to comment Share on other sites More sharing options...
ecmilley Posted February 21, 2015 Report Share Posted February 21, 2015 Thats gonna happen if u can change one to a different khz will help or turn down sensitivity Link to comment Share on other sites More sharing options...
123chadder Posted February 21, 2015 Report Share Posted February 21, 2015 why do you need 2 finders in one hut? Link to comment Share on other sites More sharing options...
Terry Posted February 21, 2015 Report Share Posted February 21, 2015 Most times one unit will see both peoples lines But if you need to. Change the ping speed lower on one then sensitivity raise interference rejection on both And it might just work Link to comment Share on other sites More sharing options...
porkpie Posted February 21, 2015 Report Share Posted February 21, 2015 Use one unit. We never bother with 2 in the same hut. Link to comment Share on other sites More sharing options...
Burtess Posted February 21, 2015 Report Share Posted February 21, 2015 In those long huts we always use 2 finders.... usually it is my buddy and his Lowrance Elite 4X and my Humminbird 570. No interference issues between those units 10' apart. He sees both his and my baits (I think he uses wide beam) and I just see my own. You can't fish from the far sides of the hut and use one finder.... can't see it! Burt Link to comment Share on other sites More sharing options...
LostAnotherOne Posted February 22, 2015 Report Share Posted February 22, 2015 It doesn't matter if you change the frequency. Having two in the same area isn't going to work. Link to comment Share on other sites More sharing options...
Burtess Posted February 22, 2015 Report Share Posted February 22, 2015 Maybe it is because they are both Lowrance??? In a bungalow on Nipissing in January we had 3 units running at the same time and all worked fine, my Humminbird 570, the Elite 4X, and some model of Vexilar flasher. All within a radius of less than 10 feet over 27ft of water. Burt Link to comment Share on other sites More sharing options...
irishfield Posted February 23, 2015 Report Share Posted February 23, 2015 I've fished side by side with Andy in my hut. Holes 4 feet apart and both of us using our own finders. My Lowrance 110C and I think Andy had a Vex. No interference. Now the "Elite" units... we just spent 10 days watching the slow decending lines on our screens, caused from Paul's Elite at at least 50 feet apart or more. Something about the Elite it seems. Caused the same deal on Lloyd and Terry's new Marcums and my Lowrance. Link to comment Share on other sites More sharing options...
ecmilley Posted February 24, 2015 Report Share Posted February 24, 2015 Was running hds 8 and 9 with a marcum in a small area turn sensitivity up on hds units they would interfere with marcum ran one at 83 other at 200 sens aroind 74% best detail Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now