Motorhead Posted May 3, 2007 Report Share Posted May 3, 2007 I was offered a free 16` canoe. It was going to the dump so I grabbed it even though it`s in really rough shape... After looking it over I thought I`d just sand it down with a belt sander and re-fibreglass it ??? The only paddling I do is on the Grand River from Caledonia to Cayuga a few times a year so weight is not an issue... there`s no portaging involved . Here`s some pictures of it so you`ll get the idea of what I have to work with ??? This is the only identification I can find on it ??? Any ideas what make this is ??? This is the bottom.... lots of old caulking and previous patch jobs ( I can see this ruining alot of belts) Here`s the yoke... Made out of a broken paddle Here`s one of the inside and of a nice crack in the stern Doesn`t look to promising but I figured what the hell..... a can or 2 of resin, 100sq feet of glass and who knows how many belts for my beltsander and when I`m done it should hopefully float for the few hours per trip that I`m in it I`m open for suggestions.... and if I do end up making the time to start this project I`ll take lots of pictures on the progress... thanks Doug Link to comment Share on other sites More sharing options...
pigeonfisher Posted May 3, 2007 Report Share Posted May 3, 2007 call your buddy and tell him to take his canoe to the dump. hahahaha Good luck to you, it looks like quite a project. As you say, if it floats for 8 hours a year you should be OK. Link to comment Share on other sites More sharing options...
tjsa Posted May 3, 2007 Report Share Posted May 3, 2007 LOL, where did the nose(or was that the tail) end of the canoe get to, most times damage is to the main body?? If the keel is good, you can fabricate the nose(or tail),.... get it back in as best shape as possible with wood or alumimum thwarts, along with adding some fibreglass and paint, and it will be a decent boat for a back lake stowaway, if its legal where you are. Link to comment Share on other sites More sharing options...
Raf Posted May 3, 2007 Report Share Posted May 3, 2007 that looks like a job for duct tape. Link to comment Share on other sites More sharing options...
irishfield Posted May 3, 2007 Report Share Posted May 3, 2007 Princess Auto...the silver Tarp tape. Sticks good and water proof Link to comment Share on other sites More sharing options...
jediangler Posted May 3, 2007 Report Share Posted May 3, 2007 That WF logo might be for World Famous. I have seen camping equipment and backpacks made by them. As far as that canoe goes...sure would make a nice flower pot. Good luck, I think you're going to need it. Link to comment Share on other sites More sharing options...
TJQ Posted May 3, 2007 Report Share Posted May 3, 2007 Doug... Doug... Doug... (insert shaking of head here) what have you done???? Even I've seen better days than than that thing. Link to comment Share on other sites More sharing options...
yellowboat Posted May 3, 2007 Report Share Posted May 3, 2007 If I was going to fix that I would fill all the void and hole with a chopped fiberglass and resin mixture, sand smooth and the re gel coat the whole canoe. Because in order to just re fiberglass using cloth you would have to take all the old gel-coat off down to original fiberglass for proper adhesion. Link to comment Share on other sites More sharing options...
luv2fish Posted May 3, 2007 Report Share Posted May 3, 2007 Nice canoe, is the guy who gave you the canoe still your friend? Link to comment Share on other sites More sharing options...
mepps Posted May 3, 2007 Report Share Posted May 3, 2007 Looks like a job for Jesse James and the Monster Garage... Link to comment Share on other sites More sharing options...
Entropy Posted May 3, 2007 Report Share Posted May 3, 2007 looks like an old coleman fiberglass, call coleman canada and ask if you can get a cap for it. Current coleman canoes are made in Quebec by Pelican, I have ordered parts from them in the past (also a cap, but for a newer canoe), cost should only be about $15, the might even have a set of new rails for the sides, then your off to the races. I still have the exact canoe as that at the in-laws farm, I painted it with Tremclad, just hand sand and spray on the paint -> 7 years latter and the paint is doing great. This might save you some work. Entropy Link to comment Share on other sites More sharing options...
easton13th Posted May 3, 2007 Report Share Posted May 3, 2007 All the best! A lot of elbow grease and some TLC and you can post the finished gay man.! Link to comment Share on other sites More sharing options...
BITEME Posted May 3, 2007 Report Share Posted May 3, 2007 Bail It!!!!!!!!!1 You can get a new coleman cheaper than the amount of time and materials you will put into that Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now