Dutch Posted May 19, 2012 Report Share Posted May 19, 2012 I like tybo's idea. As long as the rebuild is done by a certified mech. with quality parts, you should get a lot more use out of it. There's a stigma out there that once a motor blows up, it is toast and if a rebuild is done, the same thing will happen again, a ticking time bomb so to speak. I don't agree with that if done properly with good parts, a rebuild takes a motor back to essentially factory specs. Link to comment Share on other sites More sharing options...
mike rousseau Posted May 19, 2012 Author Report Share Posted May 19, 2012 (edited) Can`t tell you the cost.Don`t do outboards. Sleeves,pistons,rings.crank bearings and head.Inspect and use whats not worn out. from what i can tell its about $1500 max in parts...retail... and im guessing it would be the same cost as he estimated to completely tear apart the power head and put it back together...$300-500 so my 500 already in another 1500 in parts and another 500 in labour... so $2500 total on the high end... maybe a bit less... edit for crank cost... missed that...and bearing cost not included ... Edited May 19, 2012 by Musky Mike Link to comment Share on other sites More sharing options...
ecmilley Posted May 19, 2012 Report Share Posted May 19, 2012 thats not to bad for a price i re did my own v6 outboard and by the time i got piston/rings/bearinss/gaskets i was still 1500. now onto your engine i am sorry but regardless of what i repair if i strip off a cylinder head i check it for truness and pressure test it sounnds like your guy may have missed a step i am sorry to say, but it happens to the best of us when you think you have a problem nailed down Link to comment Share on other sites More sharing options...
fishnsled Posted May 19, 2012 Report Share Posted May 19, 2012 That`s why you get a full rebuild,you`re not fixing it you are making a fresh engine. Agree. Did mine last spring, bearings, crank, piston. sleeve, rings etc. Much happier with the $10G's plus in my pocket as to a dealer for an engine that would have been 12-15G's plus tax and labour, depending on the engine. This is for a 115hp. I shopped everywhere I could and the rebuild just seemed to make the most sense to me at the time. Wouldn't hesitate to do it again. Link to comment Share on other sites More sharing options...
mike rousseau Posted May 19, 2012 Author Report Share Posted May 19, 2012 (edited) thats not to bad for a price i re did my own v6 outboard and by the time i got piston/rings/bearinss/gaskets i was still 1500. now onto your engine i am sorry but regardless of what i repair if i strip off a cylinder head i check it for truness and pressure test it sounnds like your guy may have missed a step i am sorry to say, but it happens to the best of us when you think you have a problem nailed down you may be right... he said checked the head for trueness im gunna continue to assume hes on the ball... everyone in the area says they are the best... and their lot has a lot boats... they are highly recomended and trusted by everyone in the area... im trying to stay positive in thinking and im telling myself that my motor is the odd one out that was able to stump these guys... Edited May 19, 2012 by Musky Mike Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted May 19, 2012 Report Share Posted May 19, 2012 from what i can tell its about $1500 max in parts...retail... and im guessing it would be the same cost as he estimated to completely tear apart the power head and put it back together...$300-500 so my 500 already in another 1500 in parts and another 500 in labour... so $2500 total on the high end... maybe a bit less... edit for crank cost... missed that...and bearing cost not included ... Plus the cost of a new block if there's a crack in a water jacket somewhere................. Link to comment Share on other sites More sharing options...
mike rousseau Posted May 19, 2012 Author Report Share Posted May 19, 2012 Plus the cost of a new block if there's a crack in a water jacket somewhere................. +$1000 retail Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted May 19, 2012 Report Share Posted May 19, 2012 +$1000 retail That $3500 puts you 1/2 way to a new Yammie 50 that come with a warranty. Link to comment Share on other sites More sharing options...
mike rousseau Posted May 19, 2012 Author Report Share Posted May 19, 2012 (edited) That $3500 puts you 1/2 way to a new Yammie 50 that come with a warranty. i found a new 2009 50 yammy for 5999 in ontario... same as usa price on a 2012 or i stck with a 40 at 5000 usa thats my delema... 5000 for a brand new yamaha 40hp or 2000-3000 to fix a 40hp honda if someone asked me last summer to upgrade from my honda to a new yamaha for 2-3 thousand i wouldnt have hesitated... ,,, Edited May 19, 2012 by Musky Mike Link to comment Share on other sites More sharing options...
mike rousseau Posted May 19, 2012 Author Report Share Posted May 19, 2012 (edited) ... Edited May 19, 2012 by Musky Mike Link to comment Share on other sites More sharing options...
lew Posted May 19, 2012 Report Share Posted May 19, 2012 5000 for a brand new yamaha 40hp or 2000-3000 to fix a 40hp honda If it was me Mike, I'd be buying the new Yamaha rather that putting a whole whack of $$$$ into the 12 year old Honda. Link to comment Share on other sites More sharing options...
carll2 Posted May 19, 2012 Report Share Posted May 19, 2012 when it comes to tillers im a yamaha guy!!!! i use these tillers day in and day out at work and freaking love the smoothness and reliability, i use the 60hp,and 70 hp models and they work like a charm and sip fuel oh and the rpm adjustment is pretty cool!!!!!! im not a merc fan, seen too many of them blow up at work. Link to comment Share on other sites More sharing options...
carll2 Posted May 19, 2012 Report Share Posted May 19, 2012 oh btw our 60s and 70s are used on 26 foot freighters loaded with me plus 6 people when i guide aand still get a good 27mph Link to comment Share on other sites More sharing options...
smally21 Posted May 19, 2012 Report Share Posted May 19, 2012 in poker they call it 'spending good money after bad money'. a 12 yrold motor with a 3000$ rebuild is still a 12 yrold motor, resale wise.. get the new one and enjoy your fishing!! Link to comment Share on other sites More sharing options...
mike rousseau Posted May 19, 2012 Author Report Share Posted May 19, 2012 (edited) in poker they call it 'spending good money after bad money'. a 12 yrold motor with a 3000$ rebuild is still a 12 yrold motor, resale wise.. get the new one and enjoy your fishing!! im not concerned with resale value... considering i put 500+ hours a year on my motor a new one would drop in value pretty fast... in 3 years it would be at 1500 hours!!!!!!! my concern is how much i can get for my dollar... ... Edited May 19, 2012 by Musky Mike Link to comment Share on other sites More sharing options...
lew Posted May 19, 2012 Report Share Posted May 19, 2012 Putting 500 hours a year on your motor is another excellent reason for going with the new one Mike. And this is just a thought, but could you possibly use the new motor as some sort of tax deduction seeing as you use it for your guiding business Link to comment Share on other sites More sharing options...
ecmilley Posted May 19, 2012 Report Share Posted May 19, 2012 ok at 500 hours a year your honda is at 6000 hours it doesn't owe you a cent rebuliding the power head is econmical choice and the rotating assembly is as good as new, the thing is the electrical-charging/starting/ignition is bound to fail at some point as is the lower unit and trim/tilt units you just may be ahead with a new motor at the very least it'll give you confidence and piece of mind Link to comment Share on other sites More sharing options...
Dontcryformejanhrdina Posted May 19, 2012 Report Share Posted May 19, 2012 I'd just buy the new one if it's in your budget. At least you'll have a warrenty if anything happens, plus it's not like your buying something you won't get good use out of. Link to comment Share on other sites More sharing options...
SlowPoke Posted May 19, 2012 Report Share Posted May 19, 2012 A new motor will pay for itself in fuel efficiency and peace of mind. How many clients will you have to turn away waiting for a rebuild? Link to comment Share on other sites More sharing options...
mike rousseau Posted May 19, 2012 Author Report Share Posted May 19, 2012 (edited) How many clients will you have to turn away waiting for a rebuild? None... I have use of a ranger 620T if need be... Edited May 19, 2012 by Musky Mike Link to comment Share on other sites More sharing options...
Dontcryformejanhrdina Posted May 19, 2012 Report Share Posted May 19, 2012 None... I have use of a ranger 620T if need be... That's a lot harder on gas though, it would eat into your profits if you had to use it for a while. Link to comment Share on other sites More sharing options...
scugpg Posted May 19, 2012 Report Share Posted May 19, 2012 I would go new and the 40hp seems to be in the same weight range between brands so its be looking at tiller features, dealer network and warranty as deciding factor. Dont think brand matters when comparing merc yammy or honda. Link to comment Share on other sites More sharing options...
woodenboater Posted May 19, 2012 Report Share Posted May 19, 2012 While it's a big chunk of change, maybe this is a sign that you need to upgrade. Perfect excuse to get a new Yammy. Talk to your accountant, if you have one, and see how much can be written off, could ease the pocketbook pain. Link to comment Share on other sites More sharing options...
Billy Bob Posted May 19, 2012 Report Share Posted May 19, 2012 Have you looked at a Evinrude E-Tech. Link to comment Share on other sites More sharing options...
mike rousseau Posted May 19, 2012 Author Report Share Posted May 19, 2012 Have you looked at a Evinrude E-Tech. No I'm concerned with fuel economy considering my motor runs from when I leave the launch till I get back 5-12 hours later... I also don't like their "no service for 3 years" gimmic... It's based on hours... 300 i think...And I'd put the hours on in a few months... They are a lot cheaper then 4 strokes... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now