mike rousseau Posted November 17, 2011 Report Share Posted November 17, 2011 my dishwasher (not the wife) seems to be ejecting black pieces and its ending up on the "clean" dishes at the end of the cycle... they are small pieces but there is enough of them... and they seem to be concentrated in the upper front right corner... this is the area of my washer where the soap dispenser is... please help... im so used to a washer... i cant have dishpan hands.... the fish will rip them apart... thnx for anything you can tell me... mike Link to comment Share on other sites More sharing options...
mercman Posted November 17, 2011 Report Share Posted November 17, 2011 my dishwasher (not the wife) seems to be ejecting black pieces and its ending up on the "clean" dishes at the end of the cycle... they are small pieces but there is enough of them... and they seem to be concentrated in the upper front right corner... this is the area of my washer where the soap dispenser is... please help... im so used to a washer... i cant have dishpan hands.... the fish will rip them apart... thnx for anything you can tell me... mike Mike, of all people, you should know that i am in the parts bussiness.Or are ya getting independant on me. Link to comment Share on other sites More sharing options...
Tom McCutcheon Posted November 17, 2011 Report Share Posted November 17, 2011 Could be the impeller starting to break up. Link to comment Share on other sites More sharing options...
davey buoy Posted November 17, 2011 Report Share Posted November 17, 2011 If it isn't leaking water on the floor,your probably right.What about the door seals? Link to comment Share on other sites More sharing options...
vance Posted November 17, 2011 Report Share Posted November 17, 2011 I know from experience that if you have a gas water heater the fill tube inside gets brittle and breaks off into very small plastic bits.Check the aerator on your kitchen taps to see if there are any in there and if so there's your problem. vance Link to comment Share on other sites More sharing options...
mike rousseau Posted November 17, 2011 Author Report Share Posted November 17, 2011 upon closer inspection its a rubber material... but the door gasket looks fine Link to comment Share on other sites More sharing options...
esoxansteel Posted November 17, 2011 Report Share Posted November 17, 2011 mouse turds, just kidding you should be out muskie fishing and not worrying about something like that, i mudded in a sky lite 2 years ago and its still not painted. Link to comment Share on other sites More sharing options...
NAW Posted November 17, 2011 Report Share Posted November 17, 2011 I'm no dishwasher repair man, but maybe there's something thats jammed in there, rubbing on a moving part. Broken peace of something you may have put in the dishwasher maybe? Or one of the likely several o-rings, or gaskets could be worn out. How old the unit? Link to comment Share on other sites More sharing options...
mike rousseau Posted November 17, 2011 Author Report Share Posted November 17, 2011 I'm no dishwasher repair man, but maybe there's something thats jammed in there, rubbing on a moving part. Broken peace of something you may have put in the dishwasher maybe? Or one of the likely several o-rings, or gaskets could be worn out. How old the unit? pretty old... it was hand-me-downed from the in laws... Link to comment Share on other sites More sharing options...
davey buoy Posted November 17, 2011 Report Share Posted November 17, 2011 Just maybe time for a new one as I'm guessing 15 year old or abouts? Link to comment Share on other sites More sharing options...
mike rousseau Posted November 17, 2011 Author Report Share Posted November 17, 2011 Just maybe time for a new one as I'm guessing 15 year old or abouts? sound about the right age Link to comment Share on other sites More sharing options...
mercman Posted November 17, 2011 Report Share Posted November 17, 2011 Mike, you know me, so i will take the liberty of saying this.If you change the machine because of this small problem, you have more money that brains It is a kenmore made by Whirlpool, and parts are inexpensive and still available, so FIX IT !!!!! Link to comment Share on other sites More sharing options...
davey buoy Posted November 17, 2011 Report Share Posted November 17, 2011 Mike I don't know if that's something you want to takle. I'm a millwright and I don't know if I would tackle that unless it was something in the screen or something obvious. Also because of age, and pricing on new machines,energy efficient,I,m also thinking of replacing Mine.It's about 11years old and did well for me. Just my 2cnts worth.davey. Link to comment Share on other sites More sharing options...
mercman Posted November 17, 2011 Report Share Posted November 17, 2011 Mike I don't know if that's something you want to takle. I'm a millwright and I don't know if I would tackle that unless it was something in the screen or something obvious. Also because of age, and pricing on new machines,energy efficient,I,m also thinking of replacing Mine.It's about 11years old and did well for me. Just my 2cnts worth.davey. Before you scrap an 11 year old machine, let me know what you need, and i will price it out for you. Probably even send you a parts breakdown so you can take it apart. 99% of all appliance repairs are inexpensive fixes.There is absolutely no new appliances on the market today that will outlast the older models.ZERO. most breakdown right after warranty(1 year) and after 5 years, the parts are no longer available, even if the law states minimum 10years. Energy efficient means using undersized electrical parts, that work so hard to do the job, that they burn out within 12 months. I have seen new 22 cubic foot fridges with 1/5 hp compressors in them.Minimum size should be 1/4+ to 1/3 hp. All in an effort to save electricity.What they dont say is that the compressor has to work 5 times longer to achieve the proper temp. Even washing in cold water Hard on the washer parts, and since you are putting ice cold clothing in a dryer, it takes 3 times longer to dry.Where are you savinh money in electricity Sorry for the Rant It just burns me to see people scrap perfectly good appliance over tiny problems Trust me on this.I have 32 years experience in appliance parts, and have seen the evolution of appliances. Link to comment Share on other sites More sharing options...
davey buoy Posted November 17, 2011 Report Share Posted November 17, 2011 I may than reconsider,thanks merc. Link to comment Share on other sites More sharing options...
Big Cliff Posted November 17, 2011 Report Share Posted November 17, 2011 Believe me, Paul knows his stuff, he helped me fix my fridge and saved me hundreds of dollars. It was a lot easier than I thought it would be! Link to comment Share on other sites More sharing options...
Billy Bob Posted November 17, 2011 Report Share Posted November 17, 2011 TAKE PAUL'S ADVICE....HE CAN'T CATCH FISH ....BUT KNOW HIS APPLIANCES....sorry buddy I had to take the SHOT.... SERIOUSLY...listen to Mr. Paul..... I just spent almost $500 rebuilding 2 - 30 year old Toro Snow Blowers because they are BUILT with real steel and no plastic....and they still blow like a porn star... Link to comment Share on other sites More sharing options...
ketchenany Posted November 17, 2011 Report Share Posted November 17, 2011 Believe me, Paul knows his stuff, he helped me fix my fridge and saved me hundreds of dollars. It was a lot easier than I thought it would be! X2 on that one! Link to comment Share on other sites More sharing options...
bigbuck Posted November 17, 2011 Report Share Posted November 17, 2011 I fixed my whirlpool duet washer last year, I put a new pump in that cost me 125 and an hour and a half of my time. A new one is 1500. I can skin my knuckes for that kinda dough ray me. Link to comment Share on other sites More sharing options...
Big Cliff Posted November 17, 2011 Report Share Posted November 17, 2011 TAKE PAUL'S ADVICE....HE CAN'T CATCH FISH ....BUT KNOW HIS APPLIANCES....sorry buddy I had to take the SHOT.... SERIOUSLY...listen to Mr. Paul..... I just spent almost $500 rebuilding 2 - 30 year old Toro Snow Blowers because they are BUILT with real steel and no plastic....and they still blow like a porn star... For $500.00, what did you do, put two new engines on them? New bushings, belts, friction wheel, skid shoes, clean carbs, do a tune up. Should be $100.00 or so ea. Link to comment Share on other sites More sharing options...
mercman Posted November 18, 2011 Report Share Posted November 18, 2011 For $500.00, what did you do, put two new engines on them? New bushings, belts, friction wheel, skid shoes, clean carbs, do a tune up. Should be $100.00 or so ea. Good point there Cliff. Bob has a reputation for being a bit of a "THRIFTY" man and self proclaimed tax dodger Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now