Gerritt Posted July 16, 2007 Report Share Posted July 16, 2007 Well I think I may be fux0red. I noticed while up in Killarney that my boat seemed to be taking on a "More then Usual" amount of water. It has always leaked a bit... but 12" in 2 hours??!!?? upon further inspection this weekend then Main Seam in the middle of the hull is cracked right in half.. and has a piece missing from it... DANG! I will post a couple pics when I get a chance to take them. I dont feel this boat is seaworthy any longer and did not feel safe in it myself (boating all my life) not to mention letting my brother-in-law take it out as a newbie.. Time to say goodbye to her and take her to the great smelter in the sky.... (What's aluminium selling for these days on the scrap market?) If anyone has a line on an affordable 14-16' tinny I am all ears! Gerritt. Link to comment Share on other sites More sharing options...
Joey Posted July 16, 2007 Report Share Posted July 16, 2007 Dang Gerritt, that sucks. Maybe you should return it to who ya bought it from for a refund I'll keep my eyes open on a tinny for ya. Joey Link to comment Share on other sites More sharing options...
Greencoachdog Posted July 16, 2007 Report Share Posted July 16, 2007 Now let's not be too hasty!!! That doesn't sound like anything a little silicone caulk, some baling wire and a good coat of paint won't fix Bubba!!! Link to comment Share on other sites More sharing options...
Dutch Posted July 16, 2007 Report Share Posted July 16, 2007 3M 5200 works wonders. Just scuff up the surface a bit with a coarse wire brush, clean with acetone, let dry and let the 5200 cure. Should be good to go in a week or 2. Link to comment Share on other sites More sharing options...
Fishnfiend Posted July 16, 2007 Report Share Posted July 16, 2007 There's a product that you buy in a tube...it's kinda like putty. You take it out of the tube, blend it and apply it and in about an hour, you can put it back in the water. The stuff is grindable and paintable. If I were you I'd try to fix your boat before you scrap it. Link to comment Share on other sites More sharing options...
lunkerbasshunter Posted July 17, 2007 Report Share Posted July 17, 2007 sorry to hear about your boat. that really sucks! Link to comment Share on other sites More sharing options...
Zamboni Posted July 17, 2007 Report Share Posted July 17, 2007 Post some pics Gerritt-lots of us here have done complete renos on boats. I rebuilt wear rings on aluminum pumps of merc sportjets with 2 part epoxy you mentioned fishnfiend-great stuff for some aps. Not sure it would be right choice to repair the skin on a tinny tho-maybe to smooth out an overlapping patch tho. If cracks far enough forward a patch rivetted on, gluvit on seams and then epoxy as body filler would be good-with a keel guard on top. Link to comment Share on other sites More sharing options...
pigeonfisher Posted July 17, 2007 Report Share Posted July 17, 2007 i may have a 14' fiberglass for sale, with trailer. trailer is worth $300. boat is free. if you want a 20hp johnson, you tell me what that is worth. i think doug may have been in the boat, not sure, but i think so. the motor is a 2000, long shaft... we have a custom aluminum transom on the boat. the motor has about 20 hours on it. Link to comment Share on other sites More sharing options...
Gerritt Posted July 17, 2007 Author Report Share Posted July 17, 2007 I dont know if epoxy based products would do it in this situation... the rib that is busted runs right down the centre of the boat from bow to stern. This boat is not a deep-v is it has a very flat bottom, and takes alot of pounding when running (floor flexes like no tomorrow) there are a few horizontal cross members that are cracked as well (interior of the hull) I dont think a quick fix would hold out given the situation and the fact that the crack is located directly in the centre of the boat where the boat takes the most abuse... Some OFC'rs have made some generous offers both in terms selling a new vessel and loaning me one they are not currently using. Thank you guys! this is what OFC is all about! Gerritt. Link to comment Share on other sites More sharing options...
boston Posted July 17, 2007 Report Share Posted July 17, 2007 bummer G, seat open in my ride anytime for yah bro. J. Link to comment Share on other sites More sharing options...
Gerritt Posted July 17, 2007 Author Report Share Posted July 17, 2007 Thanks Jamie, we do need to get together and wash some baits, drink some adult beverages and talk about airplane parts LOL Thanks brother! Gerritt. Link to comment Share on other sites More sharing options...
motv8tr Posted July 17, 2007 Report Share Posted July 17, 2007 Dang Gerrit, that stinks, but I don't think you'll be withut for long by the sounds of things This is an amazing place isn't it? Good luck... Maureen Link to comment Share on other sites More sharing options...
ricoboxing Posted July 17, 2007 Report Share Posted July 17, 2007 get a kayak! Link to comment Share on other sites More sharing options...
Headhunter Posted July 17, 2007 Report Share Posted July 17, 2007 Wow G, sorry to hear that... I'm assuming that if your drove it up to Irishfield's place and left it there, he to, would suggest that it's days are over? I'll keep my ears open for ya! HH Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now