prop guy in the GTA?

[squiggy]

are there any "goto" prop guys in the gta? looking to get a prop reworked (not repaired). rpm #;s are in the lower end of the operating range, 5300 rpm is max im getting and max for the motor is 5750 rpm. wanted to see if there is anything they can do with the current prop to get me a little more rpm. thanks

[workwear]

i think you would have to buy a new prop to get what your looking for....

 

why would you wanna run so close to the max....400 rpm's isnt a great deal of performance afterall

 

i would just leave it and be on the safe side!!

[John Bacon]

I believe that the pitch of a prop can be modified. I am not sure if doing so in your case is a good idea though.

[DRIFTER_016]

Citywide Welding

 

1867 Drew Rd

Mississauga, ON

L5S 1J5

 

905-677-0316

[HTHM]

You are over propped in my opinion, the motor should be able to reach max RPM otherwise it is working too hard. Drop an inch of pitch to gain ~300 rpm at max throttle.

[Angler management]

The Prop Drop, Lindsey.ON

[4x4bassin]

Citywide Welding

 

1867 Drew Rd

Mississauga, ON

L5S 1J5

 

905-677-0316

 

These guys are good .

[davey buoy]

Citywide Welding

 

1867 Drew Rd

Mississauga, ON

L5S 1J5

 

905-677-0316

 

 

These guys are good .

 

x3,the guy is good

[squiggy]

_{thanks for the help guys}

[AmblinRamblin3]

city wide

 

X4

[squiggy]

my 150 optimax wont turn a 19p tempest plus on my boat (max rpm is 5000 with that one), bought a 17p tempest plus and gained 400rpm so it put me at 5400 rpm, raised the motor another hole hoping to gain another 100-150 rpm but ended up losing 100 rpm and it put me at 5300 max trimmed out, can figure out why I lost rpm instead. im looking for someone to work on the 19p tempest to repitch it to a 17 and maybe shave some weight off it to get my rpms up a bit more. think they call it labbed or blueprinted, something like that, and keep the 17p as a spare. just thinking about this right now whether I want to go that route or not but id like to talk with whoever first to see if they can do it. thanks again for the recommendations . either that or sell the 19p and try another prop out

Edited September 16, 2013 by sqyuiggy

[davey buoy]

my 150 optimax wont turn a 19p tempest plus on my boat (max rpm is 5000 with that one), bought a 17p tempest plus and gained 400rpm so it put me at 5400 rpm, raised the motor another hole hoping to gain another 100-150 rpm but ended up losing 100 rpm and it put me at 5300 max trimmed out, can figure out why I lost rpm instead. im looking for someone to work on the 19p tempest to repitch it to a 17 and maybe shave some weight off it to get my rpms up a bit more. think they call it labbed or blueprinted, something like that, and keep the 17p as a spare. just thinking about this right now whether I want to go that route or not but id like to talk with whoever first to see if they can do it. thanks again for the recommendations . either that or sell the 19p and try another prop out

City Wide changed my prop from a 19P to a 17P.No problem he said.Works well,two years now.