Cracked hot tub filter canister NF

[davey buoy]

 

Once again I'm looking for a bit of advice. This plastic canister cracked at the plug in three spots.This is a Juccuzi tub and it's about 20-25 years old. I think I might have troubles getting a replacement but not sure.This just happened when tightening the drain plug in. Was not even tight when it cracked.

With all of todays adhesives anyone know of something that might work?.I know being at the thread is not a ideal spot for repair,but thought as I'm watching the Jays leading,and the Pits/NYI game into overtime. lol. Maybe there is something that may work?

 

Pits just won btw.

Edited May 5, 2013 by davey buoy

[chris.brock]

I run my hot tub without a filter, no problems, mine has a little screen for water entering the heater

 

there maybe a little more suspended stuff in the water, but my filters are $80 a pop, so I don't bother with it, oh yeah, I'm always looking for ways to save a few $$$

[davey buoy]

I run my hot tub without a filter, no problems, mine has a little screen for water entering the heater

 

there maybe a little more suspended stuff in the water, but my filters are $80 a pop, so I don't bother with it, oh yeah, I'm always looking for ways to save a few $$$

My filter Chris is reuseable/washable . It is quite long,and all piping is that white PVC looking material with glued joints. To change will be a son of a gun fore sure.I don't think mine has a filter screen by the heater?,I will check. Thanks

[misfish]

Dave try these guys. Just down the road from you.

 

http://nearnorthsupply.com/

[davey buoy]

Dave try these guys. Just down the road from you.

 

http://nearnorthsupply.com/

Thanks Brian,I will.

[Live2fish85]

Call Sterling Pools in Peterborough, I worked there for years. Rather then me tell ya what you need to know call them, ask for Fred. He can set you up with everything you need and get you the parts if theyes are around. I have seen that often though and usually find a replacement no problem.

[davey buoy]

Call Sterling Pools in Peterborough, I worked there for years. Rather then me tell ya what you need to know call them, ask for Fred. He can set you up with everything you need and get you the parts if theyes are around. I have seen that often though and usually find a replacement no problem.

Thanks,I'll check him out if need be. I know of two spots near where I'll be tomorrow. I'll try them first and see where I'm at.

[Muskieman]

Two part Expoxy

[davey buoy]

Two part Expoxy

You think that would hold?.Even with the stress of turning in a plug?Any special type?

Edited May 5, 2013 by davey buoy

[Muskieman]

Try it ! 10$ could save you 100$

[Muskieman]

The one I use and used to sell a whole lot of is Loctite # QM50 in a Syringe

[BITEME]

JB weld really rough it up and put it to it

[muddler]

YUp. JB Weld

[Chance]

Replace it.If it is cracked in one spot it is a sign of things to come.

[davey buoy]

JB weld really rough it up and put it to it

I have some,will try. Thanks

[davey buoy]

YUp. JB Weld

Will do.

[davey buoy]

Replace it.If it is cracked in one spot it is a sign of things to come.

You may be right. Just looking for more options. Thanks

[misfish]

Did ya go to near north? Dont play with silly puddy.

 

If your dead set on getting it fixed (welded) take it to Barrie welding and Machine. Their on Anne st accross from Kelly tire. You will pay though. Atleast you,ll have it fixed,for awhile. Like said,Replace it.If it is cracked in one spot it is a sign of things to come.

Edited May 6, 2013 by Misfish

[davey buoy]

Did ya go to near north? Dont play with silly puddy.

 

If your dead set on getting it fixed (welded) take it to Barrie welding and Machine. Their on Anne st accross from Kelly tire. You will pay though. Atleast you,ll have it fixed,for awhile. Like said,Replace it.If it is cracked in one spot it is a sign of things to come.

That's where I ended taking my parts too. They did a great job and one more of the same to do.Didn't get a chance today as planned. I'm in the same area tomorrow. Will try again. Thanks B.