spinnerdoc Posted November 25, 2011 Report Share Posted November 25, 2011 Wow, theres some old school.And if I may add a trick to getting the air out. I did the same as Dave,Gerber jars. I would put a piece of wax paper in it and light it on fire and close the lid. A trick that was shown to me by an ole timer. I HAVE HEARD OF THIS TRICK BUT WAS NOT SURE HOW TO DO IT, THE LADY WHO TOLD ME ABOUT THIS USED THIS METHOD IN HER MASON JARS FOR PICKLES. DO YOU LIGHT IT UP INSIDE THE JAR AND CLOSE IT, OR YOU CLOSE THE JAR AND LIGHT IT UP AND PUT IT ON TOP? Link to comment Share on other sites More sharing options...
misfish Posted November 26, 2011 Report Share Posted November 26, 2011 OR YOU CLOSE THE JAR AND LIGHT IT UP AND PUT IT ON TOP? You lost me with all the SHOUTING. Link to comment Share on other sites More sharing options...
SirCranksalot Posted November 26, 2011 Report Share Posted November 26, 2011 For some of those that might have tried this,did you? Back in the early 80,s I read an artical about soaking small pieces of sponge, in ,cod liver oil and aness and wax.Spelt wrong I know.I did this and it worked for me. I would clip away and make it look like a roe bag. Just asking. in Sounds interesting. Have you used that 'trick' lately? How do you apply the wax? Link to comment Share on other sites More sharing options...
dave524 Posted November 26, 2011 Report Share Posted November 26, 2011 I HAVE HEARD OF THIS TRICK BUT WAS NOT SURE HOW TO DO IT, THE LADY WHO TOLD ME ABOUT THIS USED THIS METHOD IN HER MASON JARS FOR PICKLES. DO YOU LIGHT IT UP INSIDE THE JAR AND CLOSE IT, OR YOU CLOSE THE JAR AND LIGHT IT UP AND PUT IT ON TOP? You light it and drop it in the jar while still lit quickly put the lid on while still burning, it will burn until the oxygen is all used up and go out. If done correctly when the air inside the jar cools the lid will snap and seal with an audible snap and seal . No oxygen = no spoilage Link to comment Share on other sites More sharing options...
misfish Posted November 26, 2011 Report Share Posted November 26, 2011 in Sounds interesting. Have you used that 'trick' lately? How do you apply the wax? You melt the wax and add the rest. Do this outside though. STINKY Link to comment Share on other sites More sharing options...
spinnerdoc Posted November 26, 2011 Report Share Posted November 26, 2011 You lost me with all the SHOUTING. ha ha I wasn't shouting Brian Link to comment Share on other sites More sharing options...
spinnerdoc Posted November 26, 2011 Report Share Posted November 26, 2011 (edited) You light it and drop it in the jar while still lit quickly put the lid on while still burning, it will burn until the oxygen is all used up and go out. If done correctly when the air inside the jar cools the lid will snap and seal with an audible snap and seal . No oxygen = no spoilage So thats how you do it....Thanks guys Edited November 26, 2011 by spinnerdoc Link to comment Share on other sites More sharing options...
dave524 Posted November 26, 2011 Report Share Posted November 26, 2011 This guy was a prolific writer on steelheading back in the 70's and the first place I heard of sponge vaseline balls many years ago, haven't touched sponge since yarn became popular with all the pretty colours in the 80's, lot less hassle FWIW here is a link for making sponge balls straight from the original horses mouth. http://record-eagle.com/daverichey/x75049104/Dave-Richey-Vaseline-balls-for-steelhead Link to comment Share on other sites More sharing options...
Crazy Ivan Posted November 26, 2011 Report Share Posted November 26, 2011 Another version - In a baby food jar partly filled with roe, take a wooden or paper match and place it in the roe so it stands up by itself (head up of course). Light the head of the match and screw the lid on before it goes out. When done correctly, you'll hear a pop the next time it's opened. Link to comment Share on other sites More sharing options...
Ralph Field Posted November 26, 2011 Report Share Posted November 26, 2011 I tried the sponge balls years ago and almost set fire to our kitchen while melting the vasolene. After enduring my wife's wrath I didn't catch anything on them. Link to comment Share on other sites More sharing options...
misfish Posted November 26, 2011 Report Share Posted November 26, 2011 I am corrected,it was vasolene not wax. Link to comment Share on other sites More sharing options...
misfish Posted November 26, 2011 Report Share Posted November 26, 2011 This guy was a prolific writer on steelheading back in the 70's and the first place I heard of sponge vaseline balls many years ago, haven't touched sponge since yarn became popular with all the pretty colours in the 80's, lot less hassle FWIW here is a link for making sponge balls straight from the original horses mouth. http://record-eagle.com/daverichey/x75049104/Dave-Richey-Vaseline-balls-for-steelhead Lots of good reading there Dave,Thanks for the link. Link to comment Share on other sites More sharing options...
SirCranksalot Posted November 26, 2011 Report Share Posted November 26, 2011 This guy was a prolific writer on steelheading back in the 70's and the first place I heard of sponge vaseline balls many years ago, haven't touched sponge since yarn became popular with all the pretty colours in the 80's, lot less hassle FWIW here is a link for making sponge balls straight from the original horses mouth. http://record-eagle....s-for-steelhead Interesting read. But I think he meant open cell foam rather than closed cell: closed cell won't soak up anything. Link to comment Share on other sites More sharing options...
BillM Posted November 26, 2011 Report Share Posted November 26, 2011 You guys make this way more complicated than it actually is. Link to comment Share on other sites More sharing options...
dave524 Posted November 27, 2011 Report Share Posted November 27, 2011 Interesting read. But I think he meant open cell foam rather than closed cell: closed cell won't soak up anything. Correct Bill, we used open cell and it took a lot of searching in the housewares depts.to get the right stuff, a shiny translucent foam worked way better than the more dull opaque stuff. Never went to the extreme of vaseline impregnating it, just ran balls of foam maybe some sent and like I said when yarn came out it was abandoned. Link to comment Share on other sites More sharing options...
Sinker Posted November 27, 2011 Report Share Posted November 27, 2011 The key to it keeping is no air, and as little moisture as possible. Period. I use the same method as Bill. Another tip is to freeze them in the ziplocks in a single layer of eggs. This way they stack nice in a tupperware container, and when you take them out, they thaw a little quicker for those days your in a rush. No cure for me, just straight fresh roe. I scrape skien, and leave it in a strainer, with a sheet of paper towel on top, in the fridge over night. Most of the juice will fall thru the strainer into a bowl. Dry eggs keep for a long time. The moisture causes frost in the bags, and thats what kills the eggs. BTW, I haven't drifted a trib for many, many years, but this is how we did it in the late 80's-90's, when there were more fish than fisherman!! S. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now