Jump to content

vance

Members
  • Posts

    725
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by vance

  1. I had a similar issue with my gmc.It turned out to be the (can't remember the name)unit on the throttle body where the wires run into.it is a round unit near the base that controls the mixture.I replaced it and all was fine again. vance
  2. Ouch thats got to hurt
  3. My mom use to tell me about my dad working on his Peterborough cedar strip in the dining room over the winter,I can just imagine what it cost him to do that. Great restoration!!!! vance
  4. I'm no expert but it sounds like the condenser (in the furnace duct) is icing up because the ac is running continuously for to long a time. vance
  5. I run synthetic 2 stroke oil and the one I use (amsoil) doesn't smell
  6. I to bought some goodies from Phil at etackle and couldn't be happier.!!!! vance
  7. I drive by it fairly often and have never been impressed with what I could see and I know of two families that were going to stay there and after a brief tour said we are out of here and went else where. vance
  8. Technically you are suppose to carry the rental agreement with you which is your proof of a temporary boaters license BUT even last year when the OPP stopped me they didn't ask for my license vance
  9. x2 on the krown rust proofing no rust after 20 years vance
  10. most places that do automotive upholstery repair and boat covers can easily do this kind of work. vance
  11. A friend of mine has had a PK for 7-8 years now and( although not this model) has had ZERO issues with it. vance
  12. You might want to check with the company that you are renting the van from and see if you are allowed to leave the US with their vehicle. vance
  13. I have been thinking since I posted and I wonder how skis on the front wheels and tracks on the back wheels(locking diff)would work that way I wouldn't need to buy a new 4wd truck. vance
  14. A friend of mine just sent me this,I wonder how much they cost vance
  15. How about Royal Distributing vance
  16. any ways my old Kenmore it started to do the same thing and I found out after taking the drain system apart a smallish drill bit (that I had been looking for) had jammed the pump.After removing that and $10 worth of change from the pump it worked fine. vance
  17. we need a new section APPLIANCE PROBLEMS AND REPAIR :rofl2: VANCE
  18. I just carry a copy of the page of my house ins that pertains to my boat,I recopy it every year from the new policy.As long as the policy # is there and the expiry is shown my agent says that's all I need. vance
  19. I have used Rayplex ltd in oshawa before with good results. 341 Durham street 905 579 1433 just down and across for the oshawa center. you can see the large prop on the roof from Stevenson. he also sells new michigan props. vance
  20. 3 cylinder 2 stroke mercs don't have a head,it is a one piece head and block.What you describe sure sounds like you are starting to blow a hole through the top of the piston,the shinny metal bits are from the piston.lucky for you the plug shorted out before the hole was complete.you should be able to shine a small lite thru the spark plug hole and see if it is so,just rotate the engine by hand till the piston is at top dead center on that cylinder. vance
  21. I thought it might great to have one but they want $20,000 for the one in the video vance
  22. I know sheds are hard to find but the two I have found were both wedged in a branch in a tree.I guess they were removed on purpose by a buck. vance
  23. unfortunately I DIDN,T catch it just got to hold it for a picture before she went back. vance
  24. I DIDN'T catch this but got to hold it for the picture and was she heavy and I am not holding it at arms length but as close to me as I could without touching my suit. vance well i did something wrong back to square one that didn't work either can someone tell me what i am doing wrong Thanks Bill I couldn't get a big pic like you did to come up but this is ok.
  25. Nascar web site says race postponed until 7pm monday nite that should working people happy vance
×
×
  • Create New...