Jump to content

BITEME

Members
  • Posts

    2,044
  • Joined

  • Last visited

  • Days Won

    10

Everything posted by BITEME

  1. Have you tried running it both ways external and internal with the same result are those line teed internally some where potential leak did you check for a fuel filter could be dirty and restricted external tank check the o ring air leak is the ball the right way on your external tank just asking all linkages intact choke and throttle if loose or stripped just asking have you played with any set screws. Your a guy cheers peter
  2. Is it carbed or injected how old is the gas was it sitting for long have you tried SEAFOAM in the fuel spray it in the intake try to run it the best you can with the additive and bunny ears or in the water let the seafoam get right in it I would say 1/2 an hour or so running then let it sit for a day check for any cracked suction lines the SEAFOAM should sort out and sticking issues don’t dismantle anything until you try this Just my 2 cents cheers peter
  3. You guys get all the good storms🤘
  4. might be of some help there was no escape here indoor-air-filtration (1).pdf
  5. Nice rig why the concern I can see many happy days on that ill say it again know the conditions around and it’s all good! get out there peter
  6. had kind of the same setup except one of us use to get up on the bow until it planned out then roll off the side ......fun times
  7. think you can send me the plans for that one??????
  8. Hockey sticks, plywood, pulleys and clothes line cable mostly tiller control though a steering wheel and throttle control was a luxury that just wasn't always available.
  9. Anybody remember the gold cup races at Bronte Beach it was a good day for a picnic always I spent many years terrorizing Bronte Creek and Harbour as a kid with a sea flea and a 15hp jonson http://images.halinet.on.ca/OakvilleImages/Images/BHS/002656626.jpg
  10. Really! You went there
  11. Just an update he won best of show in Texas at the Hand made motorcycle show very cool and well deserved
  12. Plastic toboggan great deer mover will slide over every thing
  13. Do all the stuff mentioned. I don’t think you have a pooched motor get it back in the water couple hours running or what ever bring it in. Loosen the bottom plug let some fluid out honey is good creamed honey is bad while your at it change the plug(s) I think you'll be fine peter
  14. Have you ever had this motor running??
  15. Do beat yourself up poop happens and this didn’t happen this winter this is a previous owner thing not your fault at all live and learn if you go the jb route after doing seals scarf up the area good where you are laying it down wipe it with acetone let it dry and go to it you’ll be fine!! peter
  16. I did notice that I though it was just crappy weld
  17. One more thing and this may not be kosher for everyone and may not even be necessary when I put it all back together again I usually sneer a thin layer of gasket maker on the flat matting surfaces peace out peter
  18. The video method is good I have taken seals out like that not going to lie taking it off is my preferred method I would suggest you go one set of screws higher and get access to the water pump and change that rubber impeller worse thing is to be out in the middle of your favourite lake and not pumping cooling water once you undo it it will drop a bit and hang on the shift linkage usually a coupler with 2 set screws loosen the lower and the lower unit will come away put it up on a bench and go to town you will see the housing for the impeller you can’t miss it troll some forums specific to your mortor first time is always painful and bloody take your time be patient use your cell for disassembly and reassembly the money you save buy a new toy for the boat and take pride in your new skill YOU CAN DO IT!!!!!! cheers peter
  19. Video looks good just take time you can do it!!! cheers Peter
  20. Yes we are talking about the seal at the prop and both fill screws upper and lower should have either o rings or crush washers
×
×
  • Create New...