-
Posts
2,058 -
Joined
-
Last visited
-
Days Won
10
Content Type
Events
Profiles
Forums
Store
Everything posted by BITEME
-
Hockey sticks, plywood, pulleys and clothes line cable mostly tiller control though a steering wheel and throttle control was a luxury that just wasn't always available.
-
Anybody remember the gold cup races at Bronte Beach it was a good day for a picnic always I spent many years terrorizing Bronte Creek and Harbour as a kid with a sea flea and a 15hp jonson http://images.halinet.on.ca/OakvilleImages/Images/BHS/002656626.jpg
-
10 for sticking the landing!
-
I have to share not fishing but very cool!
BITEME replied to BITEME's topic in Non-Outdoors Open Discussion
Just an update he won best of show in Texas at the Hand made motorcycle show very cool and well deserved -
Plastic toboggan great deer mover will slide over every thing
-
Do all the stuff mentioned. I don’t think you have a pooched motor get it back in the water couple hours running or what ever bring it in. Loosen the bottom plug let some fluid out honey is good creamed honey is bad while your at it change the plug(s) I think you'll be fine peter
-
Have you ever had this motor running??
-
Do beat yourself up poop happens and this didn’t happen this winter this is a previous owner thing not your fault at all live and learn if you go the jb route after doing seals scarf up the area good where you are laying it down wipe it with acetone let it dry and go to it you’ll be fine!! peter
-
I did notice that I though it was just crappy weld
-
One more thing and this may not be kosher for everyone and may not even be necessary when I put it all back together again I usually sneer a thin layer of gasket maker on the flat matting surfaces peace out peter
-
The video method is good I have taken seals out like that not going to lie taking it off is my preferred method I would suggest you go one set of screws higher and get access to the water pump and change that rubber impeller worse thing is to be out in the middle of your favourite lake and not pumping cooling water once you undo it it will drop a bit and hang on the shift linkage usually a coupler with 2 set screws loosen the lower and the lower unit will come away put it up on a bench and go to town you will see the housing for the impeller you can’t miss it troll some forums specific to your mortor first time is always painful and bloody take your time be patient use your cell for disassembly and reassembly the money you save buy a new toy for the boat and take pride in your new skill YOU CAN DO IT!!!!!! cheers peter
-
Video looks good just take time you can do it!!! cheers Peter
-
Yes we are talking about the seal at the prop and both fill screws upper and lower should have either o rings or crush washers
-
If you want to pay me to fly out from Nova Scotia I’ll come do it but in reality I will say again it’s easy to do and doesn’t take long I only did pressure tests on the rescue boat drives as of roof of repair( needs to be reliable)
-
Here is my take on this I have had lots of experience in this you had water during the boating season for sure it didn’t happen over the winter if it did stay emulsified over the winter you should be okay you said used it’s likely time I try to do the seal every two years religiously unless I see what your seeing going forward if you want to drain in the fall fine but replace the oil you drain don’t let them sit dry this is a quick fix without getting soaked by a dealer the prop seal is very easy to do in your driveway do this first and run the motor on the water for a week if it’s milky again you could have other issues and it could be higher up the drive if not your a champ you didn’t say how big your motor was not that it matters pretty much all the same on the drive end its easy you can do it cheers peter
-
That is very slick Chris truly cool!!!!
-
You don’t need to go deep the shorelines are a treasure trove forgot to mention🤘
-
Pick your days and what you are comfortable with never had issues with lake o SMART BOATING HUGE PAY OFFS you would be shocked to know what is within your grasp in and around the Gta on lake o lots of trophy class fish #1. pay attention to the weather although beautiful and bountiful lake o can be very cruel very fast can’t be anymore clear on this point! but you have to be comfortable …as for the tiller what’s your point get out there and see for yourself hit the harbours and shore lines I promise you won’t be disappointed not sure what else to say it’s all there go get ‘em! cheers Peter
-
Best advice I can give you from what I read you must have a boat put in at fifty point get out about 300 or 400 feet off shore drop your lines and troll towards Niagara Falls stay in 30 or 40 feet of water or go out a little deeper look for hooks on the bottom stop and drop big white rubber jigs on them just saying cheers peter
-
My buddy has been on this for a while and it’s ready for pavement. In my opinion it’s one of the best builds I have ever seen Simple clean very sexy!!!
-
I can say it’s official the ring neck pheasant was beaking off this morning ,spring is on the way he is still hiding and staying low when he pops out I will try to get a picture and I did see a half dozen robins at work the other day let the growing season begin!!!!! cheers peter
-
Still waiting for my spring ring neck pleasent to show up has come every year same time for the last 5 years sticks around for a month or so and then I don’t hear him anymore
-
Your always so cute and friendly looking Lew🥰
-
Or fire fighters trying to cut you out