Tybo

If you buy a licence to build a product from the company that holds the patent for a product. You have exclusive rights to build said product.Where the parent company still builds the product under a register trade mark or patent.

Now you`re just picking on me with the pointy end.

So what you are saying they are different.Whats you`re point. Did they say they invented it.Whats you`re point.

It is a great reel,But if you not a chief engineer that works for NASA never take it apart. I can install a ten gear planetary gear system Quicker then putting back together my Morrum.

NO.You want a charger that charges between 8 and 15 amps with auto shut down.Not a maintenance charger.

You are sucking in air at a clamp or threw the hose.Tighten all clamps,make sure the end are on tight at the connections. Still no work,change the hose.

Didn`t put the new ones in.The old ones clean.No discolouring on the pistons.Can`t see any carbon also.

Thanks Guy`s

looking for a down load for 200 verado. Need the plug gap.

I can`t remember the name and I believe it`s on Ox tongue lake.It`s a couples resort. No screaming kids running around.

Lew,That was on the tracker trailer.So might of be bad paint.Since then I don`t but the pressure treated against it.

Get a flat screw driver and straighten the locking tab on the quick connect so it pulls tight again.

One thing I notice a few years back.That the chemicals in the pressure treat wood ate at the paint on the trailer.

Happy birthday Norm and many returns.

The cabling in boats is a mess do to the same harness is used but the boat are different lengths. This creates the look of to much cable and not all use.For the cables are already there for options.

Forgot one Dan.Stuck in traffic. I`m going to shove that thing up where the sun doesn`t shine if you keep blowing it.

Wayne,If I remember right. The Klaxon was invented a the beginning of the 20 century and ran off a battery.

It`s called a claxton.

To sit for 5 weeks,you`ll get flat spots on the tires.They should go away once they get some heat into them. One thing.Make sure you`re tire are at the right pressure.

Sounds to me the repo dealer is trying to sell with a lean still out standing.

A truck for 3000.try the scrapers It`s going to be very damn old for that price.

Off track. Whats the proper name for a electric horn.

OK Lew.Trace the lines back from the horn.Since there is no ground at the switch,there is a good chance it has a relay in the circuit. If there is a relay there a strong chance the problem is in that area. There also the chance that when you where moving the wires around that the strands broke down and you no longer cane get enough amps threw. The ground will go to a common buses bar most likely on the fuss panel